Assessments - 3, GPA: 3.3
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
button for a satellite tuner or external video source. The station number is displayed and the programme can be seen on the television. 4 Select the recording speed by pressing the SPEED button as many times as required 5 Hold down the REC (.) button for a while to start recording. The record indicator appears on the television and DVD-VCR display. An index is recorded on the tape (Refer to page 29). 6 To stop recording, press the ¦ button once. • If your DVD-VCR ejects the cassette when you start recording, check to make sure that the cassette’s safety tab is intact or that the opening (Created by a broken safety tab) is overed with adhesive tape. • If you reach the end of the tape while recording, the cassette rewinds automatically. English -23 Recording from Another VCR or Camcorder You can copy a cassette to your DVD-VCR from another video source, such as another VCR or a Camcorder etc. • It is an infringement of copyright laws to copy prerecorded cassettes or to re-record them in any form without the permission of the owners of the corresponding copyright. 1 Connect the output jack of your external devices to the SCART input connector or AUX on the front or rear of the DVD-VCR. Recording a Programme with Automatic Stop This function enables you to record up to nine hours (LP) of programmes.Your DVD-VCR stops automatically after the requested length of time. 1 Switch on the television. 2 Insert the cassette on which the programme is to be recorded, with the window visible and the safety tab intact or the opening covered with adhesive tape. The DVD-VCR is switched on automatically. 3 Select the station to be recorded by pressing the PROG( or ) button or select the source (AV1, AV2 or AUX) by pressing the INPUT SEL. button for a satellite tuner or external video source. The station number is displayed and the programme can be seen on the television. 4 Select the recording speed by pressing the SPEED button as many times as required (Refer to page 23). 5 Hold down the REC (.) button for a while to start recording. The record indicator appears on the television screen and DVD-VCR display. An index is recorded on the tape (Refer to page 29). 6 Press the REC (.) button several times to increase the recording time in: • 30-minute intervals up to four hours. • 1-hour intervals up to nine hours. The length is displayed on the television displays. The selected programme is recorded for the length of time requested. At the end of that time, the DVD-VCR stops recording automatically and power off. 2 Insert a blank cassette in your DVD-VCR. 3 Insert the pre-recorded cassette in the other video source (VCR or Camcorder etc). 4 Press the INPUT SEL. button to select the appropriate input on your DVD-VCR: • AV1, AV2 for the SCART input. • AUX for the RCA input. 5 Start playing back the cassette to be copied. 6 Hold down the REC (.) button for a while to start recording on your DVD-VCR. 7 When you have finished recording, press the ¦ button on both VCR and DVD-VCR. • If you wish to view the cassette being copied, your DVD-VCR must be connected as usual to the television (Refer to page 9 for further details). LENGTH 2:30 SET LENGTH : PRESS REC . 7 If you wish to cancel the recording before the end, press the STANDBY/ON button. • If the end of the tape is reached while recording, the recording stops and power off. 24 -English Using the Assemble Edit Function This function allows you to start a new recording at a specific position on the cassette while main- taining a very smooth scene change. 1 Insert the cassette to be edited in your DVD-VCR. 2 Press the ..ll button to start playback. 3 When you reach the position from which you wish to start the new recording, press the ..ll button. Using The Timer Programming Feature The Timer Programming feature allows you to preset the DVD-VCR to record a programme up to one month before that programme is to be broadcast. Up to six programmes can be preset. • Before presetting a recording, check that the Date and Time are correct. • You must check that the cassette tape is loaded. 1Press the MENU button, then press the ..or ..button to select PROG. Using the Assemble Edit Function This function allows you to start a new recording at a specific position on the cassette while main- taining a very smooth scene change. 1 Insert the cassette to be edited in your DVD-VCR. 2 Press the ..ll button to start playback. 3 When you reach the position from which you wish to start the new recording, press the ..ll button. Using The Timer Programming Feature The Timer Programming feature allows you to preset the DVD-VCR to record a programme up to one month before that programme is to be broadcast. Up to six programmes can be preset. • Before presetting a recording, check that the Date and Time are correct. • You must check that the cassette tape is loaded. 1Press the MENU button, then press the ..or ..button to select PROG. 4 Press the F.ADV/STEP button as often as necessary to advance frame by fram...