Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
When you connect it to CS (CSEL), you can control the device using the host interface signal CSEL. (Connection to MA is recommended.) MA : Master SL : Slave CS : Cable Select(CSEL) and Connecting Cables Installing DVD WriterConnecting the Audio Cable (When Connected to the Sound Card) To listen to the sound from the drive in Analog mode, connect the audio output on the DVD Writer to the audio input of the sound card using an audio cable (4-pin). Connecting the Digital output terminal. For clearer sound, use a digital output terminal. Digital output terminal is only available with the Sound card which support Digital output. For using Digital output terminal, recommend to buy & use the sound card. Confirming the Installation Installing Device Driver and 1. Go to 2. Click Firmware on the menu bar (in the upper right-hand corner). 3. Click Firmware Downloads. Check for your drive model and start downloading. Confirming the Installation Installing Device Driver and Confirming Using [Device Manager] Windows 98SE/Me 1. Click [Start] - [Settings] - [Control Panel] [ System] 2. Click on the [Device Manager] tab in the System Properties window. 3. Click CDROM drive in the Device Manager window. 1 in the picture in the left appear if the driver is installed properly. Windows 2000 1. Click [Start] - [Settings] - [Control Panel] [ System] 2. Click on the [Hardware] tab in the System Properties window and then click on the [Device Manager] tab. 3. Click DVD/CD-ROM drive in the Device Manager window. 1 in the picture in the left appear if the driver is installed properly. Windows XP 1. Go to [Start] - [Settings] - [Control Panel] [ Performance and Maintenance] 2. Click [Administrative Tools] icon in the Performance and Maintenance window. 3. Click [Computer Management] icon in the Administrative Tools window. 4. Click [Device Manager] icon in the Administrative Tools window and then click DVD/CD-ROM drive. 1 in the picture in the left appear if the driver is installed properly. Confirming the Installation Installing Device Driver and Automatic Setup The device driver is located in the 'Dos_driver' folder of the CD which is provided with the DVD Writer. 1. Insert the CD provided with the DVD Writer and open the 'Dos_driver' folder. 2. Run the CDSETUP.EXE file in the 'Dos_driver' folder. 3. When Setup is successfully completed, click 'OK' button or press the 'Enter' key. 4. Reboot the computer. The MS-DOS device driver is used to detect a DVD-MULTI drive in MS-DOS and supports only the read function as in the case of a CD-ROM drive. We recommend that you notinstall the MS-DOS device driver when you use the record function. Manual Setup 1. Make the C:\SAMSUNG directory. 2. Copy the files from the CD provided with the DVD Writer to the C:\SAMSUNG directory. To do so, type "COPY D:\Dos_driver *.* C:\SAMSUNG" after the C:\ prompt and press [Enter]. 3. Edit the 'CONFIG.SYS' file. Add the DEVICE=C:\SAMSUNG\SSCDROM.SYS \D:SSCD000 /UDMA entry. 4. Edit the 'AUTOEXEC.BAT' file. Add the C:\SAMSUNG\MSCDEX/D:SSCD000 entry. 5. Reboot the computer. How To Use The DVD Writer When the On/Off light is orange, do not turn the PC off or remove the DVD Writer as it may cause damage in the drive. How to Use a Horizontally Installed Drive You can use 3.15 Inch or 4.72 Inch (8cm or 12cm) discs. The drive cannot read the disc properly if any part of the disc is place outside the tray guiding line. How to Use a Vertically Installed Drive This drive can be installed vertically. You can use only the 4.72 Inch (12cm) discs. (You cannot use the 3.15 Inch (8cm) discs) The drive cannot read the disc properly if any part of the disc is place outside the tray guiding line. How To Use The DVD Writer The DVD Writer allows writing DVD RW discs using Nero Express and enables "packet writing" (high-speed recording) using InCD. The drive also allows writing DVD R discs using Nero Express. Unauthorized copying of DVD or software titles is illegal and the individuals that makeillegal copies will be held responsible for any copyright infringement. Using low-quality discs may lengthen the recording time or not supporting due toreduction in double speed. You can use the DVD Writer to playback music CDs, CD-ROM, CD-R/RW, or DVD-ROM discs, like a CDROM drive or a DVD-ROM drive. If your computer recognizes the [CD-ROM] icon designated to the DVD Writer as the 'E:' drive, insert a CD-ROM or a DVD-ROM disc and access the 'E:' drive. (The actual drive letter of the DVD Writer may vary depending on the user's system environment.) To Playback a DVD Video Disc : You need a DVD decoder board or the DVD decoder software program. (Provided with WinDVD Show TIME) Use WinDVD Show TIME to change the region code of the DVD Writer. DVD Region Protection Coding (RPC): The RPC feature is supported on DVD players and is used with DVD-video discs (such as movies). Currently, the motionpicture industry has divided the worldinto different regions or zones thatcorresp...
Este manual também é adequado para os modelos :DVD-player - SH-S162A (803.9 kb)