Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
• See if the PC on. • Make sure the power cable within the PC is connected properly. • If the tray still won't open with the power on, turn the power off and insert a pin(paper clip) into the emergency hole to open. The tray won't close. • Make sure the disc has been inserted properly. The PC is not working properly. • See if the jumper(s) is properly connected to the Master/Slave Selection port. • See if the drive is properly connected to the PC. See if the floppy disc remains in the PC. The drive is not working properly. • See if the drive is connected properly to the PC. • See if the device drive program has been installed properly. The Window OS can't detect the drive. • See if the device drive program has been installed properly. • Can be an OS problem. Try reinstalling the Windows OS program. The drive is connected to the sound card but cannot seem to detect it. • Your sound card is using AT BUS interface. • Connect the card to the S-ATA port or replace the card with a new card with the built-in S-ATA interface capacity. No sound is heard from an audio CD. • Check whether the audio cable is correctly connected to the sound • output terminal on the drive and the sound card CD-IN terminal. • Check that the sound card is operational. • If the Digital CD Audio Output box is checked, no sound comes out of the analog audio outputterminal of the driver. • Check the condition of the CD and wipe the surface of the CD clean before use. The system won't read the disc. • See if the system detects the drive. • Make sure you use the types of discs that are supported by the drive. • See if the on/off light turns into green. • Make sure you inserted the disc with the label facing up. • Make sure you are using the right program for disc playback. • See if the disc is clean. • See if any congealing has occurred. • Make sure the region code of the drive matches the disc number. • The friction noise generated during SPIN-UP and STOP is caused by the Automatic Ball Balancing System(ABS) and is not a malfunction. 7 Using the Drive/Storing and Cleaning Your Discs 1 Push the power button and boot the computer. After booting the computer, open the disc compartment by pressing the Eject button. 2 Insert the disc (CD) with the label on the disc facing upwards and close the disc compartment by pressing the Eject button. The indicator light comes on. 3 4 Play the disc (CD). Using the DVD Writer • Do not place a disc in direct sunlight. • Store a disc vertically in a well-ventilated and stable location. • Do not write or attach a label on a disc. • Do not drop a disc or place heavy objects on it. • Do not touch the surface of a disc; hold it by the edges. • To clean a disc, polish lightly from the inside of the disc to the outside with a soft cotton cloth. Storing Your Discs Cleaning Your Discs • Run the CD player program supplied with the sound card or play the Windows Media Player. Playing CD-DA/Audio CDs • Follow the instructions provided with the disc. • A video card or MPEG software and a sound card need to be installed to view video CDs. Playing Video CDs • The disc may not function properly if there are fingerprints, foreign substances or dust on the disc surface. • If the drive is vertically installed, you cannot use an 8 cm Mini Disc because the disc is movable. 6 Installing the Drive Installing the DVD Writer If necessary, attach a horizontal bracket to both sides of the drive. • You can purchase these accessories separately from your computer dealer. (Screws for use: M3 X 6 X 4) 1 Remove the plate from a free expansion slot and install the DVD Writer , as shown in the illustration. • If you have no free expansion slot, install the drive in place of the diskette drive. • Make sure to use the standardized screws supplied (M3X6). - To use screws other than M3X6 may result in malfunction. S-ATA supported PC (The compatible motherboard list can be found from the website) 256Mbytes or above Windows 2000/XP/Vista 2 How to install the DVD Writer on your PC. First, remove the cover; connect the cable to the DVD Writer and then to the PC. DVD Writer Horizontal Bracket Plate System Requirements 5 When using one S-ATA cable MainBoard Drive Hard Drive When you have one ODD and the other ODD products. Hard Drive MainBoard Slave Drive Master Drive Setting Titles only Best Normal Draft Titles and contents The entire label area Disc (including graphics) Labeling Time Less than 4min Less than 9 min Less than 36 min Less than 3 min Less than 7 min Less than 28 min Less than 2 min Less than 4 min Less than 20 min SH-S183L(TS-H653L)ENG RUS 1904.1.23 8:53 AM Page 1 ...
Este manual também é adequado para os modelos :DVD-player - SH-S183A (260.37 kb)