Assessments - 4, GPA: 4.3
(
)
)
|
Facilidade de uso
Block any outside attempt to access the host PC during a writing session. An error may occur if another user accesses the printer connected to his/her the system via the network during a writing session. Disable the CD auto-run feature of the CD. Inserting an auto-run enabled CD in to another drive connected to the same system during a writing/erasing session may cause an error. It is recommended that you use the image file format when you write a large number of smallsized files. When there are a large number of small-sized files to write, the system's transfer rate drops and the Superlink feature works at a more frequent rate, resulting in lower writing quality. If you are doing a CD-to-CD write, it is not necessary to check to see if you have available space on your hard disc beforehand. However, in the case of image files, it is recommended that you be sure you have at least twice the amount of space needed for the data on your hard disc, as image files are copied to the hard disc before they are copied to the media. Use a regulation-length (50cm) or shorter S-ATA cable. Using an S-ATA cable longer than 50cm may cause a transmission error. Do not use more than one type of writing software. Before you install a writing program, be sure to first uninstall existing versions of the program or other writing program(s) and reboot the system first. (The Windows operating system may be damaged if you install the Korean version while the English version remains on the system.) It is recommended to use the data recording software provided by Samsung. You may experience an error if you use other recording software. The disc has bad properties data, and or there are other discs with different properties available under the same ID. The drive's write strategy is set in a way that the drive examines to examine the disc properties and determines the optimal write conditions for those properties. For example, many disc makers do not bother to insert property information distinguishing 48X discs from 32X discs. Since the two types of discs have the same properties data, although they actually have different properties, it is often impossible to respond to the situation with a single write strategy. In order to ensure stable writing, it is necessary to downgrade the write speed. If discs from two different disc makers have the same write speed according to the labels, but actually have different write speeds, it is necessary to downgrade the write speed to ensure stable writing. Samsung' s Standards for Write Speed Restriction. Standard 1 Write speed is downgraded for the sake of write stability, if high-speed discs available in the market have particularly bad properties data, or there are low-speed discs available under the same ID. Speed-restricted discs go through further examination and adjustments Standard 2 later. If high-speed discs are available under the same ID with as low-speed discs (speed restricted at present), the speed restriction is removed when the low-speed counterparts become no longer unavailable in the market under the same ID. You may experience lower write quality in case if you use disc products by some disc makers which that are not registered with the product's firmware. Therefore, it is recommended that you use only discs by recommended companies. Even, and even if the write session is completed successfully, check the write quality before you put the disc in storage, especially in case of an important data backup. (Samsung is not responsible for any loss resulting from data backup failure.) We update the list of supported media on a regular basis through our firmware upgrades. Select Model SH-S223L(TS-H663L)Light Scribe Select Languages English Category SH-S223L(TS-H663L) DVD Writer DISC Usable Discs DVD :DVD-R, DVD-RW, DVD+R, DVD+RW, DVDROM, DVD-Video, DVD+R DL, DVD-R DL, LightScribe DVD±R, DVD-RAM CD : CD-ROM, CD-R, CD-RW, CD-DA, CD+E(G) CD-MIDI, CD-TEXT, CD-ROM XA, Mixed Mode CD CD-I, CD-I Bridge (Photo-CD, Video-CD), Multisession CD (Photo-CD, CD-EXTRA, Portforio), LightScribe CD-R Disc Diameter 4.72 Inch or 3.15 Inch (120mm or 80mm) Interface Support Interface Port S-ATA Burst Transfer Rate S-ATA 1.5Gbps ACCESS TIME (Random) CD-ROM 110ms DVD-ROM 130ms Disc Labeling Time Media Type Setting Titles only The entire label area (including graphics) CD Media Best Less than 3:30 min Less than 28:00 min DVD Media Best Less than 3:30 min Less than 30:00 min Data Transfer Speed (Max) Media Type Write Read DVD+R CAV 22X CAV 16X DVD+RW ZCLV 8X CAV 12X DVD+R DL CAV 16X CAV 12X DVD-R DL CAV 12X CAV 12X DVD-R CAV 22X CAV 16X DVD-RW CLV 6X CAV 12X DVD-ROM - CAV 16X DVD-ROM DL - CAV 12X DVD-RAM PCAV 12X PCAV 12X CD-ROM - CAV 48X CD-R PCAV 48X CAV 40X US-RW ZCLV 32X CAV 40X HS-RW CLV 10X CAV 40X CD-RW CLV 4X CAV 40X Buffer Memory 2MB Drive Installation Horizontal / Vertical Operating Environment Temperature 41°F ~ 122°F (5°C ~ 50 °C) Humidity 20% ~ 80% (RH) Dimension(Width x Height x Length) 5.34 X1.65 X ...
Este manual também é adequado para os modelos :DVD-player - SH-S223B (549.76 kb)
DVD-player - SH-S223C (549.76 kb)
DVD-player - SH-S223F (549.76 kb)
DVD-player - SH-S223M (549.76 kb)