Log:
Assessments - 3, GPA: 3.3 ( )

Instruções de Operação LG, Modelo ST600

Fabricante : LG
Arquivo Tamanho: 3.72 mb
Arquivo Nome :
Língua de Ensino: en
Ir para baixar



por este dispositivo também tem outras instruções :
TV - ST600 (3.03 mb)es

Facilidade de uso


If your access point or wireless router use WEP security, enter the security code of the key “No.1” to connect on your home network. yyAn Access Point is a device that allows you to connect to your home network wirelessly. yyIf your access point or wireless router supports the PIN Code configuration method based on WPS(Wi-Fi Protected Setup), press yellow (Y) colored button and note the code number on the screen. And then, enter the PIN number on a setting menu of your access point or wireless router to connect. Refer to the documentation for your network device. ,,Note [Manual] – Your access point may not be broadcasting its access point name (SSID). Check your router settings through your computer and either set your router to broadcast SSID, or manually enter the access point name (SSID) in [Manual]. [Push Button] – If your access point or wireless router that supports the Push Button Configuration method, select this option and press the Push Button on your access point or wireless router within 120 counts. You do not need to know the access point name (SSID) and security code of your access point or wireless router. 5. Use W/S/A/D to select the IP mode between [Dynamic] and [Static]. Normally, select [Dynamic] to allocate an IP address automatically. If there is no DHCP server on the network and you want to set the IP address manually, select [Static] then set [IP Address], [Subnet Mask], [Gateway] and [DNS Server] using W/S/A/ D and numerical buttons. ,,Note 6. Select [OK] and press Center button to apply network settings. 7. The unit will ask you to test the network connection. Select [OK] and press Center button to complete the network connection. 8. If you select [Test] and press Center button at step 7 above, the network connection status is displayed on the screen. You can also test it on the [Connection Status] in the [Setup] menu. Notes on Network Connection: yyMany network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the unit to the home network, quickly power off and/or onnect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again. yyDepending on the internet service provider (ISP), the number of devices that can receive internet service may be limited by the applicable terms of service. For details, contact your ISP. yyOur company is not responsible for any malfunction of the unit and/or the internet connection feature due to communication errors/malfunctions associated with your broadband internet connection, or other connected equipment. yySome internet contents may require a higher bandwidth connection. yyEven if the unit is properly connected and configured, some internet contents may not operate properly because of internet congestion, the quality or bandwidth of your internet service, or problems at the provider of the content. yySome internet connection operations may not be possible due to certain restrictions set by the Internet service provider (ISP) supplying your broadband Internet connection. yyAny fees charged by an ISP including, without limitation, connection charges are your responsibility. yyA 10 Base-T or 100 Base-TX LAN port is required for wired connection to this unit. If your internet service does not allow for such a connection, you will not be able to connect the unit. yyYou must use a Router to use xDSL service. yyA DSL modem is required to use DSL service and a cable modem is required to use cable modem service. Depending on the access method of and subscriber agreement with your ISP, you may not be able to use the internet connection feature contained in this unit or you may be limited to the number of devices you can connect at the same time. (If your ISP limits subscription to one device, this unit may not be allowed to connect when a PC is already connected.) yyThe use of a “Router” may not be allowed or its usage may be limited depending on the policies and restrictions of your ISP. For details, contact your ISP directly. yyThe wireless network operate at 2.4 GHz radio frequencies that are also used by other household devices such as cordless telephone, Bluetooth® devices, microwave oven, and can be affected by interference from them. yyTurn off all unused network equipment in your local home network. Some devices may generate network traffic. yyFor the purpose of the better transmission, placing the unit from the access point as close as possible. yyIn some instances, placing the access point or wireless router at least 0.45 m (1.5 ft.) above the floor may improve the reception. yyMove closer to the access point if possible or re- orient the unit so there is nothing between it and the access point. yyThe reception quality over wireless depends on many factors such as type of the access point, distance between the unit and access point, and the location of the unit. yySet your access point or wireless router to Infrastructure mode. Ad-hoc mode is ...


Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias