Log:
Assessments - 4, GPA: 3.8 ( )

Instruções de Operação Kenwood, Modelo DV-505

Fabricante : Kenwood
Arquivo Tamanho: 3.1 mb
Arquivo Nome :
Língua de Ensino: en
Ir para baixar



por este dispositivo também tem outras instruções :
DVD-player - DV-505 (611.76 kb)

Facilidade de uso


.There is condensation on the optical lens. .Separate this unit as far as possible from the device you think is generating the noise. .Refer to the “Disc handling precautions” section and wipe dirt from the disc. .Use a new disc. .Refer to the “Beware of condensation” section and evaporate the condensation. It takes a while for the disc to start playing. .Time is required for the unit to detect the disc type and size and for the rotation of the motor to stabilize. This is not a malfunction. .Approximately 10 to 20 seconds are required for a disc to start playing, although the time differs depending on the disc. The tray opens automatically. .The disc is not placed horizontally. .Properly place the disc on the tray. The top and bottom of the screen cannot be seen. .The video format of the disc being played does not match that of the connected TV monitor. .Refer to the “Video formats” section ,and use a disc with the appropriate video format for your TV or a TV with the appropriate video format for the disc. The subtitle is not displayed. .The DVD disc being played does not contain the recording of subtitles. .The subtitle mode is set to off. .The subtitle cannot be displayed when the DVD disc being played does not contain the recording of subtitles. .Press the SUB TITLE-ON/OFF key to switch on the subtitle mode. The voice (or subtitle) language cannot be changed. .The DVD disc being played does not contain the recording of more than one audio (or subtitle) language. .The voice (or subtitle) language cannot be changed when the DVD disc being played does not contain the recording of more than one voice (or subtitle) language. The viewing angle cannot be changed. .The DVD disc being played does not contain the recording of more than one angle. .You are attempting to switch the angle in a DVD section where more than one angle is not recorded. .The viewing angle cannot be changed when the DVD disc being played does not contain the recording of more than one angle. .More than one viewing angle may be recorded only in limited sections in a disc. Knowledge 42 In case of difficulty 42 In case of difficulty DVD player unit Symptom Cause Remedy Playback will not start even after a title is selected. .A viewing restriction (RATING) has been set for the disc. .Check the viewing restriction level (RATING) setting. The viewing restriction level (RATING) cannot be changed. .You have forgotten the viewing restriction (RATING) password. .Set the initial setup to the factory setup with the following procedure. 1 In POWER ON condition, keep the DISC 3 key and the 4 44444 (Skip) key key pressed at the same time. 2 When both keys are pressed, the region code of the unit, the software version, etc. will be displayed on the display. (When nothing is done, the display of this information continues.) 3 Press the ON/OFF key to go to Power OFF. 4 When Power ON is performed with the ON/OFF key, the settings become the default factory settings. The voice or subtitle language selected in the initial setting is not played. .The DVD disc being played does not contain the recording of the selected voice or subtitle language. .Use a DVD disc containing the recording of the selected voice or subtitle language. No message appears on the TV screen after a key is pressed. .The function for displaying message on the TV screen (On-Screen Messages) is set to off. .Set On-Screen Messages to on. Menu screen messages are not shown in the desired language. .The menu language function (MENU) is not set. .Set the disc menu language function (MENU) as required. DVD disc cannot be played. .DVD disc cannot be played when the sequential mode of the player is set to “SEQ.2”. .Switch it to “SEQ.1”. P.B.C.-compatible VCD cannot be played with menu playback. .Menu playback is not available when P.B.C. is Off or the sequential play mode of the player is set to “SEQ.2”. .Switch it to P.B.C. On or “SEQ.1”. Remote control unit Symptom Cause Remedy Remote control operation is not possible. .Batteries are exhausted. .The remote control is too far away from the system, the controlling angle is deviated or there is an obstacle in between. .Replace with new batteries. .Operate the unit inside the remote controllable range. Inhibition icon Symptom Cause Remedy The inhibition icon is displayed and remote control is not possible. .Playback is restricted intentionally by the software producer. .The operation is inhibited. Please try another operation. Knowledge Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, and 4,819,098, Licensed for limited viewing uses only. It is prohibited by laws to duplicate, broadcast, perform in public or rent a disc without the permission of the copyright owners. This product is compatible with the MacroVision type copy protection. Some discs contain the recording of copy inhibit signals, and the video may be disturbed when the video of such discs is recorded onto a VCR and played back. This product incorporates copyright protection tech...

Este manual também é adequado para os modelos :
DVD-player - DVF-R4050 (3.1 mb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias