The clock start counting when you press [ENTER]. 6 Press [SETUP] to exit. Note • Your clock setting will be lost if either there is a power failure or this unit has been unplugged for more than 30 seconds when you set the clock manually. • For setting the day, year, hour and minute, [the Number buttons] can also be used. • You can set the built-in calendar from the year 2007 up to 2056. Manual Clock Setting ................................................................................ .................................................................................... EN 31 Disc Introduction Connections Basic Setup Management Recording Playback Editing Function Setup Others TUNER SETTINGS Switching Analog Mode / Digital Mode You can easily switch the analog TV (NTSC) and digital TV (ATSC) with the remote control. Press [DTV/TV] on the remote control. • The analog mode and digital mode switch alternately. Note • When you switch the analog mode to the digital mode, it may take awhile until the digital channel selection is completed. The following screen is displayed while switching the mode. DTV 2-1 Now Scanning Channel Selection Select channels by using [CH / ] or [the Number buttons] on remote control. [CH / ] Use [CH / ] to change the channel. [the Number buttons] Press the channel number with [the Number buttons] to select a channel you want to watch. Enter the channel number with [the Number buttons] to select a channel you want to watch. For 1-digit number e.g.) 2 ch: [0] + [2], [2] + [-] or [2] + leave it for 2 seconds. For 2-digit number e.g.) 25ch: [2] + [5] Enter the major and minor channel number with [the Number buttons] to select a channel you want to watch. For 1-digit number e.g.) 2-2 ch: major channel [0] + [2] or [2] + [-] minor channel [0] + [2], [2] + [-] or [2] + leave it for 2 seconds. For 2-digit number e.g.) 35-16ch: major channel [3] + [5] minor channel [1] + [6] • If you enter 1 digit for major channel and leave it for 2 seconds, the number will be taken as the major channel and lowest minor channel of the major channel will be displayed. • If there is no minor channel input, lowest minor channel of the major channel will be displayed. Note • In digital TV broadcasting, 2 or more channels, called minor channels, are simultaneously broadcast on one main channel, called major channel. About minor-channel broadcasting: There may be different programs being broadcast on minor channels through a single channel from ATSC. You can watch each minor channel program being broadcast by selecting one of the minor channels. : change automatically : change manually by using [CH / ] CH4-1 18:00 18:30 19:00 19:30 20:00 CH4-2 CH4-1 CH4-1 CH4-3 Smallest CH Smallest CH CH4-3 ATSC CH4 NTSC CH4-1 CH4-2 Smallest CH Smallest CH ................................................................................ .................................................................................... 32 EN TUNER SETTINGS 1 Press [AUDIO ] to cycle through available audio languages. English 1/2 • When you press [AUDIO ], selected language will be displayed on the TV screen. • Every time you press [AUDIO ], the language will be switched. e.g.) English 1/3 > Spanish 2/3 > Other 3/3 • Available languages differ depending on the broadcast. • The information display will automatically disappear. • When you record digital TV broadcasting, the audio language you have selected will be recorded. Note • The timer recording for digital TV cannot record any audio language other than English. • [AUDIO ] does not control external device audio. • When there is only one audio channel on the broadcast, pressing [AUDIO ] does not display anything. Selecting TV Audio SE-R0264 OPEN/ CLOSE INPUT SELECT HDMI .@/: ABC GHI PQRS TUV SPACE SETUP DISPLAY AUDIO TIMER PROG. DTV/TV TOP MENU CLEAR RETURN MENU/LIST WXYZ JKL MNO DEF CH ENTER SKIP REV PLAY REPEAT REC MODE REC ZOOM PAUSE TIME SLIP 1.3x / 0.8x PLAY INSTANT SKIP STOP FWD SKIP Digital TV This section describes how to switch the TV audio. When you record a TV program, only output sound channel will be recorded. ................................................................................ .................................................................................... EN 33 Disc Introduction Connections Basic Setup Management Recording Playback Editing Function Setup Others 1 Press [SETUP] and use [K / L] to select “General Setting”, then press [ENTER]. 2 Use [K / L] to select “Channel”, then press [ENTER]. “Channel” menu will appear. 3 Use [K / L] to select “TV Audio Select”, then press [ENTER]. 4 Use [K / L] to select “Stereo” or “SAP”, then press [ENTER]. General Setting Playback Display Video Recording Clock Channel DivX HDMI Reset All Auto Preset Manual Preset TV AudioT VS eAleucdtio Select Stereo SAP Stereo: Outputs main-audio. SAP (secondary audio program): Outputs sub-audio. 5 Press [SETUP] to exit. Note on recording analog TV chann...
)
