Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
WITH MENU Select this to display only the folder menu of the MP3/Picture CD. 2 Press 3 4 to select a setting, then press OK to confirm your selection. The same password is used for both Parental Control and Disc Lock. Enter your six-digit password when prompted on the screen. The default password is 136900. 1 In ‘PREFERENCE PAGE’, press 3 4 to highlight {PASSWORD}, then press 2 to select {CHANGE}. Old Password New Password Confirm PWD OK 2 Use the numeric keypad (0-9) to enter your old six-digit password. . When doing this for the first time, key in ‘136900’. . If you forget your old six-digit password, key in ‘136900’. 3 Enter the new six-digit password. 4 Enter the new six-digit password a second time to confirm. . The new six-digit password will now take effect. 5 Press OK to confirm. TIPS: The underlined option is the factory default setting. Press 1 to go back to the previous menu item. Press SETUP to exit the menu item. 38 DVD Setup Menu Options Setting the DivX Subtitle font Restoring to original settings You can set the font type that supports the recorded DivX subtitle. 1 In ‘PREFERENCE PAGE’, press 3 4 to highlight {DivX SUBTITLE}, then press 2. Standard Albanian, Danish, Dutch, English, Finnish, French, Gaelic, German, Italian, Kurdish (Latin), Norwegian, Portuguese, Spanish, Swedish and Turkish. Cyrillic Bulgarian, Belorussian, English, Macedonian, Moldavian, Russian, Serbian and Ukrainian. Central European Albanian, Croat, Czech, Dutch, English, German, Hungarian, Irish, Polish, Romanian, Slovak, Slovene and Sorbian. 2 Press 3 4 to select a setting, then press OK to confirm your selection. Setting the DEFAULT function will reset all options and your personal settings to the factory defaults, except your password for Parental Control and Disc Lock. 1 In ‘PREFERENCE PAGE’, press 34 to highlight {DEFAULT}, then press 2 to select {RESET}. 2 Press OK to confirm. . All settings will now reset to factory defaults. English TIPS: The underlined option is the factory default setting. Press 1 to go back to the previous menu item. Press SETUP to exit the menu item. 39 Troubleshooting English WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help. Problem Solution No power – Check if the AC power cord is properly connected. – Press the STANDBY ON on the front of the DVD system to turn on the power. No picture – Refer to your TV’s manual for correct Video In channel selection. Change the TV channel until you see the DVD screen. – Check if the TV is switched on. – If the progressive scan feature is activated but the connected TV does not suppor t progressive signals or the cables are not connected accordingly, see page 18 for proper progressive scan set up or deactivate the progressive scan feature as below: 1) Turn off your TV progressive scan mode or turn on to interlaced mode. 2) Press OPEN/CLOSE to open the disc tray. 3) Press numeric keypad ‘1 on the remote control for few seconds. Distorted picture – Sometimes a small amount of picture distor tion may appear depending on the disc being played back.This is not a malfunction. Completely distorted picture or – Connect DVD Player directly to the TV. black/white picture with DVD – Make sure the disc is compatible with the DVD/ Player. – Ensure that the DVD Player’s TV Type is set to match that of the Disc and your TV. No sound or distorted sound – Adjust the volume. – Check that the speakers are connected correctly. No audio at digital output – Check the digital connections. – Check if your receiver can decode MPEG-2 or DTS and if not, please make sure the digital output is set to PCM. – Check if the audio format of the selected audio language matches your receiver capabilities. No sound and picture – Check that the RGB/SCART cable is connected to the correct device (See Connecting TV). Visit us at for service support 40 Troubleshooting Disc can’t be played Picture freezes momentarily during playback No return to start-up screen when disc is removed The player does not respond to the Remote Control Buttons do not work Player does not respond to some operating commands during playback. DVD Player cannot read CDs/DVDs Menu items cannot be selected Unable to play DivX movies Unable to select Progressive Scan on/off No sound during DivX movies playback An MPEG-4 or DivX movies does not repeat – The DVD+R/CD-R must be finalised. – Ensure the disc label is facing up. – Check if the disc is defective by tr ying another disc. – Region code incorrect. – Check the disc for fingerprints/scratches and clean with a soft cloth wiping from centre to edge. – Reset the unit by switching the player off, then on again. – Aim the Remote Contro...