Assessments - 2, GPA: 5
(
)
)
|
Facilidade de uso
• Make sure you select the appropriate input on the receiver (amplifier) so that you can listen to the sound from the player. Additional Information Symptom Remedy There is no sound. • The player is in pause mode or in Slow-motion Play mode. Press H to return to normal play mode. Sound • The player is in fast forward or fast reverse mode. Press H to return to normal play mode. • Check the speaker connections (page 23). Refer to the operating manual of your receiver (amplifier). • You selected a VES mode other than “OFF” in the Control Menu display when you connected the component using the optical digital connecting cord. Set “VES” to “OFF” in the Control Menu display (page 60). • When you have made the connections using an audio connecting cord and play DTS sound tracks, no sound will come out (page 31). • Check that the headphones plug connected to the headphones jack is firmly connected to this player. • Check that the VOL dial is not set to “MIN.” • When you close the LCD panel, no sound will come out from the built-in speakers (DVP-FX1 only). Sound is noisy. • Clean the disc. • There is a flaw on the disc. • When you have made the connections using an audio connecting cord and play a CD with DTS sound tracks, sound noise will come out (page 31). • Check that this player is placed in a horizontal position and there is no mechanical vibration or shock. The sound loses its stereo effect • Set “AUDIO” to “STEREO” in the Control Menu when you play a VIDEO CD or a display (page 54). CD. • Make sure you connect the player correctly (pages 17, 20, 23). The surround effect is difficult to • Check the speaker connections (page 23). hear when you are playing a Refer to the operating manual of your receiver Dolby Digital sound track. (amplifier). • Depending on the DVD, the output signal may not be the entire 5.1 channels. It may be monaural or stereo even if the sound track is recorded in Dolby Digital format. continued Additional Information Troubleshooting (continued) Symptom Remedy The remote does not function. • Remove any obstacles between the remote and the player. • Use the remote near the player. • Point the remote at the remote sensor on the player. • Replace all of the batteries in the remote with new ones if they are weak. • When using the battery pack, press POWER on the player to turn on it. • When using the battery pack and 10 minutes have passed after turning off the player, you cannot turn on the player with the remote. • Make sure you use the supplied remote. The disc does not play. • There is no disc inside (“Insert disc.” appears on the screen). Insert a disc. • Insert the disc correctly with the playback side facing down. • Clean the disc. Operation • There is a flaw on the disc. • The player cannot play CD-ROMs, etc (page 7). Insert a DVD, a VIDEO CD, or CD. • Check the region code of the DVD (page 6). • Moisture has condensed inside the player. Remove the disc and leave the player turned on for about half an hour (page 10). • Check that the player is placed in a horizontal position. • The buttons on the player are locked. Slide HOLD back to the off position. • The LINE SELECT switch is set to IN. Set it to OUT. (DVP-FX1 only) VES (Virtual Enhanced • The headphone surround function is turned on. Surround) does not function. Set HP SURROUND to OFF. The player does not play from • Repeat Play, Shuffle Play or Program Play has been the beginning when playing a selected. Press CLEAR (pages 68 to 73). disc. • Resume Play has been selected. Press x on the player or on the remote before you start playing (page 35). • A title menu or a DVD menu automatically appears on the TV screen when you play your DVD, or a setup display automatically appears on the TV screen when you play your VIDEO CD with PBC functions. Additional Information Symptom Remedy The player starts playing the disc automatically. • The DVD features the auto playback function. • “AUTO PLAY” in “CUSTOM SETUP” is set to “TIMER.” (page 85) Playback stops automatically. • The disc may contain an auto pause signal. While playing such a disc, the player stops playback at the signal. • There is a flaw on the disc. You cannot perform some functions such as Stop, Search, Slow-motion Play, Repeat Play, Shuffle Play or Program Play. • Depending on the disc, you may not be able to do some of these operations. Messages do not appear on the screen in the language you want. • In the setup display, select the desired language for the on-screen display in “OSD” under “LANGUAGE SETUP” (page 80). The language for the sound track cannot be changed when you play a DVD. • Multilingual tracks are not recorded on the DVD. • Changing the language for the track is prohibited on the DVD. The subtitle language cannot be changed when you play a DVD. • Multilingual subtitles are not recorded on the DVD. • Changing the language for the subtitles is prohibited on the DVD. The subtitles cannot be turned off when you play a DVD. • Depending on the DVD, you may not be ...
Este manual também é adequado para os modelos :DVD-player - DVP-F5 (1.8 mb)