Assessments - 3, GPA: 3.7
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
This feature is useful when you want to hear the dialog and enjoy the surround sound effects of “TVS WIDE” at low volume. ♦TVS STANDARD Creates three sets of virtual rear speakers from the sound of the actual front speakers (L, R) as shown below. This mode is effective when you use 2 separate front speakers. ♦NORMAL SURROUND Software with 2 channel audio signals is decoded with the Dolby Surround (Pro Logic) decoder to create surround effects. The rear speakers will emit identical monaural sounds. If you are using a centre speaker, the appropriate sounds for the centre speaker will be delivered. L □ R □ L □ R □ □ LS □ RS L: Front speaker (left) R: Front speaker (right) Li: Virtual speaker For 4 to 6 speaker setups You can enjoy the following surround effects by using the 2 front speakers and 2 rear speakers. Connect the player to the amplifier (receiver) with the ^b-1^ connection (page 27). You can experience Dolby Surround (Pro Logic) sounds or Digital Cinema Sound (DCS). DCS uses sound imaging to shift the sound of the rear speakers away from the actual speaker position or create entire sets of virtual rear speakers from one set of actual rear speakers. “VIRTUAL REAR SHIFT,” “VIRTUAL MULTI REAR,” and “VIRTUAL MULTI DIMENSION” make use of this technology. ♦ENHANCED SURROUND Provides a greater sense of presence from a Dolby Surround (Pro Logic) source with a monaural rear channel signal. Produces a stereo like effect in the rear channels. ♦VIRTUAL REAR SHIFT Shifts the sound of the rear speakers away from the actual speaker position. The shift position differs according to “REAR” or “SIDE” setting of the rear speakers (page 81). REAR L □ □ SIDE □ □ LS RS L □ □ LS □ RS □ ►continued 59 Sound Adjustments ♦VIRTUAL MULTI REAR Creates an array of virtual rear speakers from a single set of actual rear speakers. The position of the virtual rear speakers differs according to “REAR” or “SIDE” setting of the rear speakers (page 81). REAR L □ R □ L: Front speaker (left) R: Front speaker (right) LS: Rear speaker (left) RS: Rear speaker (right) □ : Virtual speaker Z Hints • You can select “SURROUND” by pressing the SURROUND button on the player. • You can also select “SURROUND” from the Control Menu (page 13). SIDE "" □ □ LS RS L □ R □ LS RS ((<□ ♦VIRTUAL MULTI DIMENSION Creates an array of virtual rear speaker positions higher than the listener from a single set of actual rear speakers. This mode creates five sets of virtual speakers surrounding the listener at approximately a 30° angle of elevation. The effect differs according to “REAR” or “SIDE” setting of the rear speakers (page 81). REAR □ □ Off □tf) o\ :A,-> \C №□ ßC'7 SIDE et L ,5 <[ /,,, C%f ts rfl ' "" n S.. ((Cl /O cr" Notes To enjoy the multichannel audio through the 5.1CH OUTPUT jacks, correctly set each speaker position and distance (page 81). When the playing signal does not contain a signal for the rear speakers, it may be difficult to hear the sound effects. When you select one of the TVS modes, the player does not output the sound of centre speaker. When you select one of the surround modes, turn off the surround setting of the connected TV or amplifier (receiver). Make sure that your listening position is between and at an equal distance from your speakers, and that the speakers are located in similar surroundings. “TVS NIGHT” only works with Dolby Digital discs. However, not all discs will respond to the “TVS NIGHT” function in the same way. If you use the DIGITAL OUT (OPTICAL or COAXIAL) jack and set “DOLBY DIGITAL” to “DOLBY DIGITAL,” “DTS” to “DTS” (for DVP-NS905V) or “ON” (for DVP-NS705V), and “MPEG” to “MPEG” in “AUDIO SETUP,” sound will come from your speakers but it will not have the SURROUND effect. If the player is set up to output the signal from the DIGITAL OUT (OPTICAL or COAXIAL) jack, the TVS effect will not be heard when you play a CD. 60 Enjoying Movies Changing the Angles If various angles (multi-angles) for a scene are recorded on the DVD VIDEO, “ANGLE” appears in the front panel display. This means that you can change the viewing angle. ©To © © © 0 © © © o © © © ® 0 © o o o o o o o c o o o o 0-0 0 0
DVD-player - DVP-NS705V (1.77 mb)