Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
2. Press Z (STOP) for more than 5 seconds. yWhen you set the resolution to 576i with HDMI connection, actual resolution is outputted to 576p. yWhen you set the resolution to [Auto], [1080i] or [1080p] for LCD panel, actual resolution is outputted to 720p. yIf you select a resolution manually and then connect the HDMI jack to TV and your T V does not accept it, the resolution setting is set to [Auto]. yIf you select a resolution that your TV does not accept, the warning message will appear. After resolution change, if you cannot see the screen, please wait 20 seconds and the resolution will automatically revert back to the previous resolution. yThe 1080p video output frame rate may be automatically set to either 24 Hz or 50 Hz depending both on the capability and preference of the connected TV and based on the native video frame rate of the content on the BD-ROM disc. yThe resolution of the AV OUT jack is always outputted at 576i. , Note 2 Connecting 5. Use w/s to select the desired resolution then press ENTER (b) to confirm your selection. • For HDMI OUT: Auto, 576p, 720p, 1080i, 1080p • For LCD panel: 576i, 576p, 720p Connecting 19 Connecting to an Amplifier Make one of the following connections, depending on the capabilities of your existing equipment. • HDMI Audio connection (page 19) • 2CH Analog Audio connection (page 20) Since many factors affect the type of audio output, see “Audio Output Specifications” for details (page 50). About Digital Multi-channel sound A digital multi-channel connection provides the best sound quality. For this, you need a multichannel Audio/Video Receiver that supports one or more of the audio formats supported by your player. Check the logos on the front of the Audio/ Video receiver and the manual. (PCM Stereo, PCM Multi-Ch, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS and/or DTS-HD) Connecting to an Amplifier via HDMI Output Connect the player’s HDMI OUT jack to the corresponding in jack on your amplifier using a Connecting 2 HDMI cable. HDMI cable HDMI cable T V Receiver/Amplifier Connect the amplifier’s HDMI output jack to HDMI input jack on your TV using a HDMI cable if your amplifier has HDMI output jack. You will need to activate the player’s digital output. (See “[AUDIO] Menu” on page 26.) 20 Connecting 2 Connecting Connecting to an Amplifier via 2 Channel Audio Output Connect the Left and Right AV OUT jacks on the player to the audio left and right in jacks on your amplifier, receiver, or stereo system using audio cables. Audio cable (not supplied) Audio/Video Adapter Connecting to your Home Network This player can be connected to a local area network (LAN) via the LAN port on the rear panel. By connecting the unit to a broadband home network, you have access to services such as software updates, BD-Live interactivity and streaming services. Wired network connection Using a wired network provides the best performance, because the attached devices connect directly to the network and are not subject to radio frequency interference. Please refer to the documentation for your network device for further instructions. Connect the player’s LAN port to the corresponding port on your Modem or Router using a commercially available LAN or Ethernet cable. yWhen plugging or unplugging the LAN cable, hold the plug portion of the cable. When unplugging, do not pull on the LAN cable but unplug while pressing down on the lock. yDo not connect a modular phone cable to the LAN port. ySince there are various connection configurations, please follow the specifications of your telecommunication carrier or internet service provider. , Note Receiver/Amplifier If there is no DHCP server on the network and you want to set the IP address manually, select [Static] then set [IP Address], [Subnet Mask], [Gateway] and [DNS Server] using w/s/a/d and numerical buttons. If you make a mistake while entering a number, press CLEAR to clear the highlighted part. , Connecting 21 2 Connecting Note Router Broadband service Wired Network Setup If there is a DHCP server on the local area network (LAN) via wired connection, this player will automatically be allocated an IP address. After making the physical connection, a small number of home networks may require the player’s network setting to be adjusted. Adjust the [NETWORK] setting as follows. Preparation Before setting the wired network, you need to connect the broadband internet to your home network. 1. Select [Connection Setting] option in the [Setup] menu then press ENTER (b). 2.Select [ Yes] and press ENTER (b) to continue. The new connection settings reset the current network settings. 3. Use w/s/a/d to select the IP mode between [Dynamic] and [Static]. Normally, select [Dynamic] to allocate an IP address automatically. 4. Select [OK] and press ENTER (b) to apply network settings. 5. The player will ask you to test the network connection. Select [OK] and press ENTER (b) to complete the network connection. 6. If you select [ Test] and press EN...