Assessments - 1, GPA: 5
(
)
)
|
Fotos e especificações Sony RDR-HX980 |
Facilidade de uso
b Notes • The one-touch dubbing button on the HDD camcorder does not function with the recorder. • In One-Touch Dubbing, the contents that have already been dubbed to the recorder cannot be dubbed again, even after you erase them from the recorder. To dub the same contents to the recorder again, dub the entire contents of the HDD camcorder (see “Dubbing from HDD Camcorder Using the On-Screen Display (HDD- Cam Dubbing)” on page 72). • Data about the dubbed contents are all cleared when you reset the recorder (page 124). • If the USB jack and the DV jack on the recorder are both connected to a compatible digital video camera, One-Touch Dubbing is performed via the USB jack. Dubbing from HDD Camcorder Using the On- Screen Display (HDD- Cam Dubbing) HDD You can dub the contents of your HDD camcorder onto the HDD of the recorder using the on-screen display. Methods to dub from the HDD camcorder include: • Incremental Dubbing The recorder automatically detects the contents recorded on the connected HDD camcorder, and starts dubbing from the contents following the last dubbed contents if there are contents that have already been dubbed. • Full Dubbing The recorder dubs all contents of the HDD camcorder, including the contents that have already been dubbed to the recorder. 1 Follow steps 1 to 3 of “Preparing for HDD camcorder dubbing” on page 71. 2 Press SYSTEM MENU. The System Menu appears. 3 Select “HDD-Cam/DV,” and press ENTER. 4 Select “HDD-Cam Dubbing,” and press ENTER. 5 Select “Incremental Dubbing” or “Full Dubbing,” and press ENTER. To dub newly shot contents only, select “Incremental Dubbing.” To dub all contents of the HDD camcorder, select “Full Dubbing.” The display asks for confirmation. 6 Select “Yes,” and press ENTER. The recorder starts dubbing the contents on the HDD camcorder to the HDD Title List of the recorder. The recorder turns off automatically if you do not use the recorder for more than 20 minutes after the dubbing has finished. To stop dubbing Press and hold x REC STOP for more than three seconds. Or, select “Exit” in step 6, and press ENTER. b Note With “Incremental Dubbing,” the contents that have already been dubbed to the recorder are not dubbed again, even after you erase them from the recorder. You can dub only newly shot contents. HDD Camcorder Dubbing DV Camcorder Dubbing DV Camcorder Dubbing Before DV Camcorder Dubbing This section explains dubbing with a DV camcorder and playing the contents of a DV camcorder via the DV IN jack on the front panel. If you want to dub by way of the LINE IN jacks, see “Recording from Connected Equipment” on page 47. The DV IN jack on this recorder conforms to the i.LINK standard. Follow the instructions in “Preparing for DV camcorder dubbing,” and then move on to the section on dubbing. For more information about i.LINK, see “About i.LINK” on page 135. How chapters are created The contents dubbed to the HDD or DVD become a single title. This title is divided into chapters. When dubbing to the HDD or a DVD-RW/DVD-R (VR mode) and when “Auto Chapter (HDD/VR)” is set to “On” in the “Recording” setup (page 110), each shooting session on the tape becomes a chapter on the disc. For other discs, the recorder divides the title into chapters according to the “Auto Chapter (Video)” or “Auto Chapter (DVD+R/+RW)” setting in the “Recording” setup (page 110). Preparing for DV camcorder dubbing You can connect a DV camcorder to the DV IN jack on the recorder to record or edit from a DV/Digital8 format tape. Operation is straightforward because the recorder will fast forward and rewind the tape for you – you do not need to operate your DV camcorder. Refer as well to the instruction manual supplied with the DV camcorder before connecting. z Hint If you plan to do additional editing on a disc after the initial dub, use the DV IN jack and record on a DVD-RW/DVD-R (VR mode) or HDD. b Notes • You cannot make a recording while DV camcorder dubbing. • The DV IN jack is for input only. It will not output signals. • You cannot use the DV IN jack when: – signal input to the DV IN jack on the front panel or recorder operation cannot be performed correctly when using a digital video camera (see “About i.LINK” on page 135). Connect the camera to the LINE IN jack and follow the instructions of “Recording from Connected Equipment” on page 47. – the input signal is not in DVC-SD format. Do not connect a MICRO MV format digital video camera even if it has an i.LINK jack. – the images on the tape contain copy protection signals, which limit recording. • If you want to play DVDs dubbed from a DV camcorder on other DVD equipment, finalise the disc (page 39). • Set the recorder and DV camcorder to the same colour system (page 101). Hookups DVD recorder to DV IN i.LINK cable (not supplied) DV output DV camcorder : Signal flow 1 Press HDD or DVD to select the recording destination. If you select DVD, insert a disc (see “1. Inserting a Disc” on page 31). 2 Insert the source DV/Digital8 fo...
Este manual também é adequado para os modelos :DVD-player - RDR-HX680 (6.22 mb)
DVD-player - RDR-HX780 (6.22 mb)
DVD-player - 3-293-880-11(1) (6.22 mb)