Assessments - 3, GPA: 3.7
(
)
)
|
Fotos e especificações Sony RDR-HXD790 |
por este dispositivo também tem outras instruções :
DVD-player - RDR-HXD790 (7.95 mb)
DVD-player - RDR-HXD790 (7.96 mb)
Facilidade de uso
– You can use the recorder’s remote control to change programme positions on the set top box receiver whenever the set top box receiver and recorder are turned on. After making hookup C, check that the recorder correctly controls the set top box receiver (page 32). D: Receiving terrestrial (For analogue broadcasting) Use this hookup if you watch cable programme positions without a set top box receiver. Also use this hookup if you are only connecting an aerial antenna. With this hookup, you can record any programme position by selecting the programme position on the recorder. DVD recorder TV to aerial input to ANALOG AERIAL IN to ANALOG AERIAL OUT Aerial cable (supplied) Wall : Signal flow 1 Disconnect the aerial cable from your TV, and connect it to ANALOG AERIAL IN on the rear panel of the recorder. 2 Connect ANALOG AERIAL OUT of the recorder to the aerial input of your TV using the supplied aerial cable. Hookups and Settings Step 2: Connecting the Video Cords/HDMI Cord Select one of the following patterns, A through E, according to the input jack on your TV monitor, projector, or audio component such as an AV amplifier (receiver). This will enable you to view pictures. D B EC A Audio/video cord (not supplied) Component video cord (not supplied) (yellow) TV, projector, or audio component TV, projector, or audio component (green) S-video cord (not supplied) TV, projector, or audio component (red) (blue) to COMPONENT VIDEO OUT to LINE 2 OUT (S VIDEO) to LINE 2 OUT (VIDEO) SCART cord (not supplied) to T LINE 3 – TV DVD recorder TV HDMI cord (not supplied) TV, projector, or audio component to HDMI OUT (green) (red) (blue) : Signal flow A SCART input jack When setting “LINE 3 Out” to “S-Video” or “RGB” in the “Video In/Out” setup (page 131), use a SCART cord that conforms to the selected signal. B Video input jack You will enjoy standard quality images. C S VIDEO input jack You will enjoy high quality images. D Component video input jacks (Y, PB/ CB, PR/CR) You will enjoy accurate colour reproduction and high quality images. If your TV accepts progressive 525p/625p format signals, use this connection and set “Progressive” to “Compatible” in the “Easy Setup” setup (page 30). Then set “Component Video Out” to “Progressive” in the “Video In/Out” setup to send progressive video signals. For details, see “Component Video Out” on page 130. E HDMI input jack Use a certified HDMI cord (not supplied) to enjoy high quality digital picture and sound through the HDMI OUT jack. When connecting a Sony TV that is compatible with the “Control for HDMI” function, see page 24. To see the signals from the connected set top box receiver when the set top box receiver is connected to the recorder using a SCART cord only, turn the recorder on. When connecting to the HDMI jack Follow the steps below. Improper handling may damage the HDMI jack and the connector. 1 Carefully align the HDMI jack on the rear of the recorder and the HDMI connector by checking their shapes. Make sure the connector is not upside down or tilted. Hookups and Settings Connector is upside Not straight down 2 Insert the HDMI connector straight into the HDMI jack. Do not bend or apply pressure to the HDMI connector. b Notes • Be sure to disconnect the HDMI cord when moving the recorder. • Do not apply too much pressure to the cabinet wall, if you place the recorder on the cabinet with the HDMI cord connected. It may damage the HDMI jack or the HDMI cord. • Do not twist the HDMI connector while connecting to or disconnecting from the HDMI jack to avoid damaging the HDMI jack and connector. When playing “wide screen” images Some recorded images may not fit your TV screen. To change the picture size, see page 137. If you are connecting to a VCR Connect your VCR to the LINE 1/ DECODER jack on the recorder (page 34). ,continued b Notes • Do not connect more than one type of video cord between the recorder and your TV at the same time. • Do not make connections A and E at the same time. • When you connect the recorder to your TV via the SCART jacks, the TV’s input source is set to the recorder automatically when you start playback. If necessary, press the TV t button on the remote to return the input to the TV. • If you connect the recorder to a TV with SMARTLINK, set “LINE 3 Out” to “Video” in the “Video In/Out” setup. • You cannot connect the HDMI OUT jack (connection E) to DVI jacks that are not HDCP compliant (e.g., DVI jacks on PC displays). • Component video and RGB signals are not output when using the HDMI connection. * This DVD recorder incorporates High- Definition Multimedia Interface (HDMI™) technology. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. About the SMARTLINK features (for SCART connections only) If the connected TV (or other connected equipment such as a set top box receiver) complies with SMARTLINK, NexTView Link*3, MEGALOGIC*1, EASYLINK*2, CINEMALINK*2, Q-Link*3, EURO V...
Este manual também é adequado para os modelos :DVD-player - RDR-HXD1090 (7.86 mb)
DVD-player - RDR-HXD795 (7.86 mb)
DVD-player - RDR-HXD890 (7.86 mb)
DVD-player - RDR-HXD895 (7.86 mb)