Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
5. Use w/s to select the desired resolution then press ENTER (b) to confirm your selection. yyIf your TV does not accept the resolution you have set on the player, you can set resolution to 576p as follows: 1. Press B to open the disc tray. 2 Press Z (STOP) for more than 5 seconds. yyIf you select a resolution manually and then connect the HDMI jack to TV and your TV does not accept it, the resolution setting is set to [Auto]. yyIf you select a resolution that your TV does not accept, the warning message will appear. After resolution change, if you cannot see the screen, please wait 20 seconds and the resolution will automatically revert back to the previous resolution. yyThe 1080p video output frame rate may be automatically set to either 24 Hz or 50 Hz depending both on the capability and preference of the connected TV and based on the native video frame rate of the content on the BD-ROM disc. ,,Note Connecting to an Amplifier Make one of the following connections, depending on the capabilities of your existing equipment. yyHDMI audio connection Since many factors affect the type of audio output, see “Audio output specifications” for details (page 38). About Digital Multi-channel sound A digital multi-channel connection provides the best sound quality. For this, you need a multi- channel Audio/Video Receiver that supports one or more of the audio formats supported by your player. Check the logos on the front of the Audio/ Video receiver and the manual. (PCM Stereo, PCM Multi-Ch, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS and/or DTS-HD) Connecting to an amplifier via HDMI output Connect the player’s HDMI OUT jack to the corresponding in jack on your amplifier using an HDMI cable. HDMI cableHDMI cableTVReceiver/AmplifierRear of the unit Connect the amplifier’s HDMI output jack to HDMI input jack on your TV using an HDMI cable if your amplifier has HDMI output jack. You will need to activate the player’s digital output. (See “[AUDIO] Menu” on page 20) USB Device Connection This player can play video, audio and photo files contained in the USB device. Playback content in the USB device 1. Insert a USB device to the USB port until it fits into place. When you connect the USB device on the HOME menu, the player plays an audio file contained in the USB storage device automatically. If the USB storage device is containing various types of files, a menu for the file type selection will appear. File loading may take few minutes depending on the number of content stored in the USB storage device. Press ENTER (b) while [Cancel] is selected to stop loading. 2. Press HOME (1). 3. Select [Movie], [Photo] or [Music] using a/d, and press ENTER (b). 4. Select the [USB] option using w/s, and press ENTER (b). 5. Select a file using w/s/a/d, and press z(PLAY) or ENTER (b) to play the file. 6. Withdraw the USB device carefully. yyThis player supports USB flash drive/ external HDD formatted in FAT32 and NTFS when accessing files (music, photo, movie). However, for Blu-ray contents, only FAT32 format is supported. Use the USB flash drive/ external HDD formatted in either FAT32 or NTFS when enjoying Blu-ray contents. yyThis unit can support up to 4 partitions of the USB device. yyDo not remove the USB device during operation (play, etc.). yyA USB device which requires additional program installation when you have connected it to a computer, is not supported. yyUSB device: USB device that supports USB1.1 and USB2.0. yyVideo, audio and photo files can be played. For details of operations on each file, refer to relevant pages. yyRegular back up is recommended to prevent data loss. yyIf you use a USB extension cable, USB HUB or USB Multi-reader, the USB device may not be recognized. yySome USB device may not work with this unit. yyDigital camera and mobile phone are not supported. yyUSB Port of the unit cannot be connected to PC. The unit cannot be used as a storage device. ,,Note 17 System Setting 3 System Setting Initial Setup When you turn on the unit for the first time, the initial setup wizard appears on the screen. Set the display language on the initial setup wizard. 1. Press 1 (POWER). The initial setup wizard appears on the screen. 2. Use w/s/a/d to select a display language and press ENTER (b). 3. Check the setting that you have set in the previous step. Press ENTER (b) while [Finish] is highlighted to finish the initial setup setting. If you want to change the setting, use a/d to select [Previous] and press ENTER (b). Settings Adjust the setup settings You can change the settings of the player in the [Setup] menu. 1. Press HOME (1). 2. Use a/d to select the [Setup] and press ENTER (b). The [Setup] menu appears. 3. Use w/s to select the first setup option, and press d to move to the second level. 4. Use w/s to select a second setup option, and press ENTER (b) to move to the third level. 5. Use w/s to select a desired setting, and press ENTER (b) to confirm your selection. 18 System Setting 3 System Setting [DISPLA...