Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
• CT (Clock Time) ON/ OFF (OPTIONAL) You can use the RDS CT information to update the time. When RDS CT information is not received and then you set CT to OFF, you can adjust the time by yourself. Refer to the page 10 for setting the clock. • TA (Traffic Announcement) ALARM/ SEEK (OPTIONAL) TA ALARM : When the tuned station has no TP information for 5 seconds, a double beep sound is output. TA SEEK : When the tuned station does not receive TP information for 5 seconds, the receiver retunes to the next station that has the TP information. • REG (Region) ON/ OFF (OPTIONAL) REG ON : The unit switches to another station, within the same network, broadcasting the same program when the receiving signals from the current station become weak. REG OFF : The unit switches to another station, within the same network when the receiving signals from the current station become weak. (This mode, the program may differ from the one currently received.) • AF (Alternative frequency) ON/ OFF (OPTIONAL) When the reception quality drops, the tuner automatically changes to another station in the network, broadcasting a better reception quality, using the PI and AF codes. • SENS (Tuner sensitivity) MID/ HI /LOW In a area in which signal reception is weak, it helps the tuner to search more stations. The weaker the reception is, the lower option you should set to. • PS (Preset scan) Each preset station appears. To cancel, press ENTER (Or the volume knob). • AS (Auto Store) The six strongest broadcasting frequencies will be stored under preset button 1-6 in the order of their signal strength. To cancel, press ENTER (Or the volume knob). CAR CD/MP3/WMA Receiver Using an USB device ON PLAYER ON REMOTE 1. Open the USB cover. 2. Connect the USB device. 3. Adjust the volume. - - Rotate the volume knob - - VOLUME Using an USB device ON PLAYER ON REMOTE 1. Open the USB cover. 2. Connect the USB device. 3. Adjust the volume. - - Rotate the volume knob - - VOLUME Using an USB device - more you can do Moving to another drive When connecting this unit to multi reader, press BAND (BAND/ DRV on remote control) to go to the next drive. Each time you press the button, the driver modes changes. Quick search of a desired file You can select and play a desired file regardless of the order in USB. 1. Press ENTER (Or the volume knob) to check all files. 2. Rotate the volume knob on unit or press v or V on the remote control to select a desired file. 3. Press ENTER (Or the volume knob) to start playback. Note • Press and hold ENTER (Or the volume knob) to check all folders. Then, repeat the previous the steps from 1 to 3 for playing a desired file. • If the USB device is already connected, press SRC (SRC on remote control.) to select a source to USB. • Other functions are same with “Listening to a CD - more you can do”. Refer to page 10. Recording to USB from CD or FM tuner 1. Open the USB cover and connect it to the unit. 2. Select CD or FM tuner. 3. Start playback. 4. Press REC to start recording. For one track CD recording, press it once. For all tracks recording, press and hold it until the beep is heard. 5. Press it again to stop. Note • Only in CD and FM tuner, recording is available. • Do not remove the USB device during recording, or an incomplete file may be made and not deleted on PC. • When USB memory is full, “Memory Full” displays and stops recording. • For tuner recording, the broadcastings are recorded by 20 moments on a file name. • For all track recording, all tracks of only a selected folder are recorded if there is more than one folder in CD. Look out for the followings • Do not extract the USB device while in operation. • For a large capacity USB, it may take longer than a few minute to be searched • To prevent data loss, back up all data. • If you use a USB extension cable or USB hub, the USB device is not recognized. • Using NTFS file system is not supported. (Only FAT(16/32) file system is supported. • External HDD, Card readers, Locked devices, or hard type usb devices are not supported. • USB port of the unit cannot be connected to PC. The unit can not be used as a storage device. CAR CD/MP3/WMA Receiver Listening to music by connecting iPod (Only in LCF800IN/ LCF800IR) ON PLAYER ON REMOTE 1. Open the USB cover. 2. Connect the iPod. 3. Adjust the volume. - - Rotate the volume knob - - VOLUME Not Supplied You can enjoy iPod-stored music on the unit by connecting it to the USB connector using the appropriate cable. ON PLAYER ON REMOTE 1. Open the USB cover. 2. Connect the iPod. 3. Adjust the volume. - - Rotate the volume knob - - VOLUME Not Supplied You can enjoy iPod-stored music on the unit by connecting it to the USB connector using the appropriate cable. Note • If the iPod is already connected, press SRC to select a source to USB. • Refer to the page 17 to check the compatible iPod model for this unit. Listening to music by connecting iPod -more you can do Pausing or restarting playback Press B BB[] on the player (B BB/[] on t...
Este manual também é adequado para os modelos :DVD-player - LCF600URU (385.32 kb)
DVD-player - LCF800IR (385.32 kb)