Assessments - 4, GPA: 4.5
(
)
)
|
Facilidade de uso
If you connect additional equipment to this DVD-VCR (page 21, 22), be sure to connect the power cord only after all connections are complete. DVD-VCR AC power cord to AC outlet Getting Started 17US Basic hookups Step 4 : Selecting a language You can change the on-screen display language. SET UP Before you start… • Turn on the DVD-VCR and your TV. • Set the TV to video input so that the signal from the player appears on the TV screen. V/v •Set TV / DVD·VIDEO switch to ENTER DVD·VIDEO on the remote. • If the DVD player is in play mode, you cannot display the setup menu. Stop the DVD playback. 1 1 Press SET UP, then press V/v to select (OPTION) and press ENTER. 2 2 Press V/v to select “Language”, then press ENTER. The “LANGUAGE/IDIOMA/LANGUE” menu appears. 3 3 Press V/v to select the desired language, English, Spanish or French, then press ENTER. 4 4 Press SET UP to exit the menu. 18US Selecting a language Step 5 : Setting the clock You must set the clock on the DVD-VCR to use the timer features properly. SET UP Before you start… • Turn on the DVD-VCR and your TV. • Set the TV to video input so that the signal from the player appears on the TV screen. •Set TV / DVD·VIDEO switch to DVD·VIDEO on the remote. • If the DVD player is in play mode, you cannot display the setup menu. Stop the V/v/B/b ENTER DVD playback. Press SET UP, then press V/v to select (OPTION) and press ENTER. Press V/v to select “Clock Set/Adjust”, then press ENTER. The “CLOCK SET/ADJUST” menu appears. Set the hour, minutes, month, day and year in sequence by pressing B/b to select the item to be set, and press V/v to select the digits. The day of the week is set automatically. Getting Started continued 19US Setting the clock 4 4 Press ENTER to confirm the setting. 5 5 Press SET UP to exit the menu. Note • The clock display appears in the display window when VIDEO mode is selected with no tape inserted or when the DVD-VCR is turned off. 20US Setting the clock Advanced Hookups for the DVD Player Component Video hookup Connect a component video cord (not supplied) or three video cords (not supplied) of the same kind and length if your TV has component video input jacks. You will enjoy accurate color reproduction and high quality images when playing DVDs. Make audio connections using the LINE OUT AUDIO L/R jacks or DIGITAL AUDIO OUT (COAXIAL) jacks on the right side of the DVD-VCR when you use Component Video hookup. See page 22 for audio connections. If your TV accepts progressive (480p) format signals, you must use this connection and then set “Progressive” to “On” in the “SCREEN SETUP” menu. For details, see “To set the “Progressive” setting” (page 48). Note Advanced Hookups for the DVD Player • The connection using COMPONENT VIDEO OUT jacks is only for the DVD player. The signal from the VCR will not be output. DVD-VCR (not supplied) TV (green) (blue) (red) Component video cord (green)(blue) (red) to COMPONENT VIDEO OUT : Signal flow (DVD only) 21US Component Video hookup A/V Receiver hookup Select one of the following patterns A or B, accordiing to the input jack on your AV amplifier (receiver). This will enable you to listen to DVD audio tracks through your AV amplifier (receiver). For correct speaker location, see the operating instructions supplied with the connected components. Note • The connection using LINE OUT AUDIO L/R or DIGITAL AUDIO OUT (COAXIAL) jacks is only for the DVD player. The signal from the VCR will not be output. DVD-VCR Front (R) Front (L) Subwoofer Rear (L) AV amplifier (receiver) with a decoder Center Rear (R) Stereo audio cord (not supplied) [Speakers] (red) (white) [Speakers] to audio input (white) (red) to LINE OUT L/R (AUDIO) to coaxial digital input Coaxial digital cord (not supplied) to DIGITAL AUDIO OUT (COAXIAL) or : Signal flow 22US A/V Receiver hookup A Connecting to audio L/R jacks This connection uses a stereo amplifier’s (receiver’s) two front speakers for sound. You can enjoy the surround function that creates virtual speakers from two stereo speakers. Select from “Surround1”, “Surround2” or “Surround3” of the surround effects (page 67). B Connecting to a digital audio (COAXIAL) input jack Use this connection if your AV amplifier (receiver) has a Dolby*1 Digital or DTS*2 decoder and a digital input jack. You can enjoy the surround effect of Dolby Digital (5.1ch) or DTS (5.1ch). *1 Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. *2 “DTS” and “DTS Digital Out” are registered trademarks of DTS, Inc. Note • After you have completed the connection using DIGITAL AUDIO OUT (COAXIAL), be sure to set “Dolby Digital” to “Dolby Digital” and “DTS” to “On” in “AUDIO SETUP” menu (page 44). Otherwise, no sound or a loud noise will come from the speakers. Advanced Hookups for the DVD Player 23US A/V Receiver hookup Basic Operations Playing discs Depending on the disc, some operations may be different or restricted. Refer to the operating instruct...