Log:
Assessments - 4, GPA: 4 ( )

Instruções de Operação Daewoo, Modelo SD-2100P

Fabricante : Daewoo
Arquivo Tamanho: 3.77 mb
Arquivo Nome : ad524e1d-44ea-4137-b8f4-ca67ef4f1412.pdf
Língua de Ensino: en
Ir para baixar



Facilidade de uso


The VideoPlus system is manufactured under license from Gemstar Development Corporation. 36 DV6T711P-AP(DESUK)1 02.7.24 11:17 AM . ` 37 mac001 300DPI 120LPI ¦ For timer recordings, clock, date, and stations must be set correctly. ¦ Load a cassette with its safety tab in place and with sufficient free space for the recording. Normal timer recording 1 1 Call the player’s "MAIN SETUP", choose "TIMER PROGRAM". Decide if you want to record "ONCE", "WEEKLY" or "DAILY"... ... and confirm. PR+/-:SELECT(AV1/AV2) 0-9 :SETUP(PR) :CORRECT SETUP:END PR -START TIME --:-END TIME --:-START DATE --/-TAPE SPEED SP PDC/VPS ON TIMER PROGRAM (ONCE) HOW OFTEN DO YOU WANT TO RECORD THIS PROGRAM? PR+/-:SELECT OK:CONFIRM SETUP:END ONCE WEEKLY(ONCE A WEEK) DAILY(MON-FRI) DAILY(MON-SAT) DAILY(MON-SUN) 2 2 Type in one after the other: • The programme location number; • the time the broadcast starts, • the time the broadcast ends, • the day of the broadcast, if it is not today. • Select LP if you wish to make a very long recording . • Switch off PDC here if you need to . 3 3 If you wish to make changes: Move to the position you want to change using the [< / >] buttons. Change the setting using the [PR+/- ] or [number] buttons. If all setting are ok, press [< or >], till you see “OK : CONFIRM” in the bottom line. Confirm. TIMER PROGRAM (ONCE) PR 01 START TIME 18:10 END TIME 20:30 START DATE 22/03(FRI) TAPE SPEED LP PDC/VPS ON PR+/-:SELECT(AV1/AV2) 0-9 : SETUP (PR) :CORRECT OK:CONFIRM SETUP:END Switch your player off. CHECK UP! • Wait a few seconds after typing a one-digit-number. • If you have made a mistake, move to the position you want to change using the [< / >] buttons and change the setting. • If programme timings overlap, the machine will give a warning message. If you don’t adjust the times, the machine will record the first programme completely then continue with the second one. • If there is no sufficient free space for the recording on the cassette the video switches automatically to “LP” for double recording capacity. • The recorder will eject cassettes which have the safety tab removed. 37 VCR Operation DV6T711P-AP(DESUK)1 02.7.24 11:17 AM . ` 38 mac001 300DPI 120LPI Timer Review – changing and erasing Call the player’s "MAIN SETUP", 1 choose "TIMER PROGRAM". TIMER PROGRAM PR START END DATE 03 21:20 22:20 14/03 01 18:10 20:30 22/03 ---- : ---- : ---- / -- ---- : ---- : ---- / ----- : ---- : ---- / -- ---- : ---- : ---- / ----- : ---- : ---- / ----- : ---- : ---- / -PR+/-: SELECT OK:CONFIRM SETUP:END TIMER PROGRAM (ONCE) PR 03 START TIME 21:20 END TIME 22:20 START DATE 14/03(THU) TAPE SPEED SP PDC/VPS ON 0 :ERASE :CORRECT SETUP:END 2 2 Select the programming to change or erase. If you want to erase this programming press button [0], confirm with OK. If you wish to make changes: Move to the position you want to change using the [< , >] buttons. Change the settings using the [PR +/–] or [number] buttons. If all settings are ok, press [< or >], until you see "OK: CONFIRM" in the bottom line. Confirm changes with [OK]. Exit the menus. 38 VCR Operation 39 More Functions Clock / counter display The counter counts in real time from the point you load the cassette. This does not have to be its beginning! The counter does not count unrecorded parts of the tape. If you rewind beyond the zero position, the counter counts in negative values (e.g. – 0:01:15). Each time you press [DISPLAY] button, 1x: Time and date+current status Time and date 2x: Counter+current status counter 3x: disappear. But if you press [CLK/CNT] button, clock and counter on display window will change each other. • If didn’t wind tape (PLAY, FF, REW,...), it doesn’t appear the tape remain time. • In case that the timer recording information is inputted in the received broadcasting signal , press the button to display the PDC icon. STOP SP PR01 ARD 14:00 14/10 E180 00:48 STEREO ON V Accessing counter zero position The player will wind to the position 0:00:00 and stop. Remaining time and cassette length Call the player’s “MAIN SETUP”, choose “TAPE CONTROL”. When you want the player to show the time remaining from the current player tape position (to find out if there is sufficient space for a recording, for example). To ensure the remaining time shown is accurate, select the length of cassette currently loaded by selecting this function until you reach the correct length. • Remaining time display is only possible when the cassette is loaded. TAPE CONTROL TAPE REMAIN E-240 01:27 TAPE REMAIN GO TO ZERO COUNTER RESET INDEX+ INDEXE- 180 E-240 E-300 PR+/-:SELECT OK:CONFIRM SETUP:END PR+/-:SELECT OK:CONFIRM SETUP:END REW SP GO TO ZERO 0:02:13 CHECK UP! CHECK UP! DV6T711P-AP(DESUK)1 02.7.24 11:17 AM . ` 39 mac001 300DPI 120LPI 40 Resetting the counter to zero Reset the counter. COUNTER RESET 0:00:00 AUTO REPEAT If you press the [PLAY] button for 5secs during stop or still mode, it goes Auto repeat mode. This player plays repeatedly the tape from the beginning to e...

Este manual também é adequado para os modelos :
DVD-player - SD-8100P (3.77 mb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias