|
Facilidade de uso
benzine, etc. to clean the cabinet. Use a clean dry cloth. Reference Preparations Label side Disc handling precautions Never play a cracked or warped disc During playback, the disc rotates at high speed in the player. Therefore, to avoid danger, never use a cracked or deformed disc or a Handling disc repaired with tape or adhesive agent. Hold the discs so that you do not touch the Please do not use discs which are not round because they may cause a playing surface. malfunction. Playing side Disc accessories Sticker The disc accessories (stabilizer, protection sheet, protection ring, etc.) which are marketed for improving the sound quality or protecting discs as well as the disc cleaner should not be used with this system because Do not attach paper or tape to either the play- they may cause malfunction. ing side or the label side of the discs. Sticky paste Cleaning If fingerprints or foreign matter become attached to the disc, lightly wipe the disc with a soft cotton cloth (or similar) from the center of the disc outwards in a radial manner. Storage When a disc is not to be played for a long period of time, remove it from the player and store it in its case. Note related to transportation and move- ment Before transporting or moving this unit, carry out the following operations. 1. Set the POWER key to ON without loading a disc. 2. Wait a few seconds and verify that the display shown appears. 3. Set the POWER key to OFF. Beware of condensation When the difference between the internal temperature of the unit and external atmosphere is large, dew (mist) may be produced on the internal parts of the unit. In such a case, turn the unit ON and leave it for a few hours until the condensation has dried up. Be especially careful in the following conditions: When the unit is brought into a place where there is a large difference in temperature between the previous location, when the humidity of the listening room is high, etc. 11System Connections (for Europe and U.K.) 11System Connections (for Europe and U.K.) DVF-3530 / DV-402 Make connections as shown below. When connecting the related system components, refer also to the instruction manuals of the related components. Caution: Do not plug in the power lead until all connections are completed. Caution Be sure to adhere followings. Or proper ventilation will be blocked causing damage or fire hazard. O Do not place any objects impairing heat radiation onto the top of unit. O Leave a space around the unit (from the largest outside dimension including projection) equal or greater than, shown below. Top panel : 50 cm Side panel : 10 cm Back panel : 10 cm Malfunction of microcomputer If operation is not possible or erroneous display appears even though all connections have been made properly, reset the microcomputer referring to “In case of difficulty”. . Connecting to a TV with video (composite) input terminal TV Preparations AUDIO OUTPUT VIDEO OUTPUT S-VIDEO AV2 AV1 DIGITAL OUTPUT (PCM/BIT STREAM) DIGITAL COAXIAL L R Audio/video cord DVF-3530 Connecting to a TV with S-video input terminal AUDIO OUTPUT VIDEO OUTPUT S-VIDEO AV2 AV1 DIGITAL OUTPUT (PCM/BIT STREAM) DIGITAL COAXIAL L R Audio cord TV DVF-3530 S-video cord 12 System Connections (for Europe and U.K.) DVF-3530 / DV-402 Connecting to a TV with SCART input terminal TV Preparations AUDIO OUTPUT VIDEO OUTPUT S-VIDEO AV2 AV1 DIGITAL OUTPUT (PCM/BIT STREAM) DIGITAL COAXIAL L R SCART cord DVF-3530 Connecting to an Audio component TV AUDIO OUTPUT VIDEO OUTPUT S-VIDEO AV2 AV1 DIGITAL OUTPUT (PCM/BIT STREAM) DIGITAL COAXIAL L R DVF-3530 AV receiver or Amplifier Video code or S-video cord Audio cord Coaxial or Optical cable Remove protective cap be- fore connecting 13System Connections (for Other countries) 13System Connections (for Other countries) Make connections as shown below. When connecting the related system components, refer also to the instruction manuals of the related components. Caution: Do not plug in the power lead until all connections are completed. Except for U.S.A. and Canada Caution Be sure to adhere followings. Or proper ventilation will be blocked causing damage or fire hazard. O Do not place any objects impairing heat radiation onto the top of unit. O Leave a space around the unit (from the largest outside dimension including projection) equal or greater than, shown below. Top panel : 50 cm Side panel : 10 cm Back panel : 10 cm DVF-3530 / DV-402 Malfunction of microcomputer If operation is not possible or erroneous display appears even though all connections have been made properly, reset the microcomputer referring to “In case of difficulty”. . Connecting to a TV with video (composite) input terminal TV Preparations AUDIO OUTPUT COMPONENT VIDEO OUTPUT VIDEO OUTPUT S-VIDEO DIGITAL OUTPUT (PCM/BIT STREAM) DIGITAL COAXIAL L R Cr Cb Y Audio cord and video cord DV-402 or DVF-3530 Connecting to a TV with S-video input terminal Audio cord TV AUDIO OUTPUT COMPONENT VIDEO OUTPUT VIDEO OUTPUT S-VIDEO DIGITAL...
Este manual também é adequado para os modelos :DVD-player - DVF-3530 (2.14 mb)