Assessments - 3, GPA: 3.7
(
)
)
|
Facilidade de uso
Restrictions due to difference between discs Some DVD and VCD discs can be played only in certain playback modes according to the inten- Inhibition icon tions of the software producers. As this player plays discs according to their intentions, some functions may not work as intended by you. Please be sure to read the instructions provided with each disc. When an inhibition icon is displayed on the TV screen connected to the player, it indicates that the disc being played is under the restriction as described above. 9Video formats 9Video formats TV formats of major countries The TV picture display and disc signal systems can be divided roughly into two TV formats (NTSC and PAL). They are variable depending on countries and areas. TV Format Major Countries & Areas NTSC Japan, Taiwan, Korea, USA, Canada, Mexico, Philippines, Chile, etc. PAL China, U.K., Germany, Australia, New Zealand, Kuwait, Singapore, etc. (For U.S.A. , Canada and U.S. Military ) This unit reproduces NTSC discs in NTSC format. (This unit can not play PAL discs.) (For other countries) This unit reproduces NTSC discs in NTSC format and PAL discs in PAL format. . If the video formats of the disc and TV do not match, the disc cannot be reproduced correctly. It is therefore required to select the disc according to the TV set in use (country and area). Check the video format of the VCD and DVD discs to be played on the player as described below. Checking the Video Format 1Check if the video formats of the TV to be used and disc to be played match each other. 2When the TV is switchable between NTSC and PAL, set the TV format according to the disc format. . Correct video cannot be reproduced if the video formats of the TV and disc do not match. TV Format Playable Disc Format NTSC only PAL only NTSC/PAL switchable NTSC PAL NTSC/PAL When the video formats are different : Try playing the disc. If the video formats of the disc and TV do not match, the played video may be black and white or become as shown below. Top and bottom areas are dark. Top and bottom edges are not displayed. Picture turbulence due to sync unmatching. . For details, refer to the instructions provided with the TV and disc. Preparations 10 Important items 10 Important items Maintenance Maintenance of the unit In regard to contact cleaner When the front panel or case becomes dirty, wipe with a soft, Do not use contact cleaners because it could cause a malfunction. dry cloth. Do not use thinner, benzine, alcohol, etc. for these Be specially careful not to use contact cleaners containing oil, for agents may cause discoloration. they may deform the plastic component. Reference Preparations Label side Playing side Cleaning If there are fingerprint marks or foreign matter found on the disc, lightly wipe the disc with a soft cotton cloth (or similar) from the center of the disc outwards in a radial manner. Storage When a disc is not to be played for a long period of time, remove it from the player and store it in its case. Handling Hold the disc so that you do not touch the playing surface. Disc handling precautions Disc accessories Do not attach paper or tape to either the playing side or the label side of the disc. Sticker Sticky paste Never play a cracked or warped disc Caution on condensation Before transporting or moving this unit, carry out the following operations. 1. Set the POWER ON/OFF switch to the ON without loading a disc. 2. Wait a few seconds and verify that the display shown appears. 3. Set the POWER ON/OFF switch to OFF. During playback, the disc rotates at high speed in the player. Therefore, to avoid danger, never use a cracked or deformed disc or a disc repaired with tape or adhesive agent. Please do not use discs which are not round because they may cause malfunction. The disc accessories (stabilizer, protection sheet, protection ring, etc.) which are marketed for improving the sound quality or protecting discs as well as the disc cleaner should not be used with this system because they may cause malfunction. Note related to transportation and movement Condensation (of dew) may occur inside the unit when there is a great difference in temperature between this unit and the outside. This unit may not function properly if condensation occurs. In this case, leave the unit for a few hours and restart the operation after the condensation has dried up. Be specially cautious against condensation in the following circumstances: When this unit is carried from one place to another across a large difference in temperature, when the humidity in the room where this unit is installed increases, etc. 11System Connections 11System Connections Make connections as shown below. When connecting the related system components, refer also to the instruction manuals of the related components. Caution: Do not plug in the power lead until all connections are completed. Malfunction of microcomputer If operation is not possible or erroneous display appears even though all connections have been ma...
Este manual também é adequado para os modelos :DVD-player - DVF-3060 (2.14 mb)
DVD-player - DVF-3060K (2.14 mb)