Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
Press SETUP button again to exit menu. 2. Use navigation buttons (<—>) to select on of the next pages: main setup page, audio setup page, video setup page, custom setup page, password setup page. 3. Press button (4) to enter selected page. 4. Use buttons (|f) to select an item you want to change. 5. Press button ► or ^ to enter sub-item to change a setting. Use navigation buttons (|f) to select required value ► or ^ to confirm selected value and return to list of settings. Attention: some menu items corresponding to preset modes are marked and cannot be selected. Input settings are stored even after switching off power. Main setup page GENERAL SETUP PAGE TV DISPLAY ANGLE MARK OSD LANG CAPTIONS SCREEN SAVER LAST MEMORY V_J TV screen 4:3/PS: When DVD player is connected to normal TV-set, wide screen picture is viewed on the whole screen, but its side parts are cut (4:3). 4:3/LB: When DVD player is connected to normal TV-set, wide screen picture is viewed thus there are black regions in upper and down part of the screen (4:3). Wide screen: use this item if home theater is connected to wide screen TV-set (16:9). View angle Some DVD movie could be shot from different angles. Detailed information concerning this subject you can get from annotation to your DVD disk. If this mode is on while playing back DVD disk shot from different angles symbol of camera is displayed on the screen. Menu language Selecting on-screen menu language. Subtitles This function is not working if there are no subtitles recorded on a disk. If disk’s subtitle function if switched off, press SUBTITLE button on remote control to switch it on. Default setting is ON. Screensaver If screensaver function is on, player is switched on, but disk is not playing back for several minutes, a moving picture is appeared on the screen, after 20 minutes player is switched to standby mode. You can press button STANBY on remote control to exit standby mode. Last memory If this function is on, layer remembers the time of disk’s taking out, the next time you load the same disk, player will play it from the place of last stop and extraction of the disk. Audio setup page_ iB)JP H/ & si) AUDIO SETUP PAGE SPEAKER SETUP SPDIF SETUP DOLBY DIGITAL SETUP CHANNEL DELAY EQUALIZER HDCD • Setup speakers fa m SPEAKER SETUP PAGE DOWNMIX FRONT SPEAKER CENTER SPEAKER REAR SPEAKER SUBWOOFER TEST TONE POST DRC V_J - Downmix Left/Right: original sound in 5.1 CH format is transferred through left and right channel only. Stereo: original sound in 5.1 CH format is transferred in stereo mode. 3D surround: effect of 3D surround sound is created using two channels only. 5.1 CH: original sound in 5.1 CH format is transferred through 5 channels: front, central, rear speakers, subwoofer. If your sound system includes front, central, rear speakers and subwoofer, you can set menu items according to real configuration. This function would not work if fading function is on (left/right, stereo, 3d surround). Test signal In 5.1CH audio mode select ON (switch test signal on), test signal will be played through all six channel in sequence. Setting the system up by test signal is to be done on condition there is no disk in the tray and parameter FADE is set to “5.1CH” position. Use this function to examine all audio channels if you are in doubt about the quality of sound. Dynamic compression (Post DRC) Dynamic range compression allows decreasing sudden volume jumps caused by sound effects. You can switch compression on (ON) or off (OFF) or select automatic mode (AUTO). Post DRC is inactive when downmix is setr 5.1. • Digital output setup page - Digital output Switch off SPDIF: sound is supplied to appliance output in analog form (5.1 CH AUDIO OUT). SPDIF/RAW: digital output signal in original format as recorded on disk. SPDIF/PCM: digital output signal in decoded PCM format. - LPCM output Select setting for audio format: 48 K, 96 K. V_y 8 4120IM.indd 8 20.02.2008 10:24:28 ENGLISH - double mono Stereo: stereo phonic output signal. Left mono: left channel output signal. Right mono: right channel output signal. Mixed mono: averaged left and right channel output signal. Dynamic This option allows decreasing volume down to very low level saving the quality and all details of audio signal. This is very useful while watching programs having high dynamic range in night time without any disturbance to other family members, but with high quality of sound. • Channel delay If you are not satisfied with the previous settings, you can set the distances to acoustic systems according the real conditions. Pres buttons (it) to choose a speaker and button (<—>) to set the distance. • Equalizer - Mode There are seven equalizer modes. You can select any of them according to your preferences and disk content. - Amplification of low, high frequencies, upper bass On - corresponds to adequate frequency band amplification. • Component CVBS: se...