Assessments - 5, GPA: 4
(
)
)
|
Facilidade de uso
The DV79 can provide the following: 720x480P (NTSC progressive scan), 720(1440)x480i (NTSC interlaced), 720x576P (PAL progressive scan) and 720(1440)x576i (PAL interlaced). At least one of these must be supported by the connected device in order for it to work with the DV79. NO VIDEO (RANDOM NOISE) Random noise will be displayed if the content-protection algorithm fails to authenticate the attached device. This will occur, for example, if a DVI device that does not support HDCP (such as a computer monitor) is connected to the DV79. To attempt to isolate this problem, remove all discs from the DV79, the power-off both it and the connected display device. Switch the display device on, then the DV79 – at this point, the idle logo of the DV79 should be shown on the display device. If this is not the case, please check the items listed above for a blank screen. If the noise appears when a copy-protected disc (DVD) is played, then it is the authentication that is failing. Please contact your dealer for further information. Problems with audio The audio provided by the HDMI connector is the same as that provided through the SPDIF socket. Note that pure DVI devices (connections requiring a HDMI to DVI convertor cable) do not support audio via this connection. If you have a HDMI device, try setting the audio output to Audio item of the Set-up menu to ‘PCM/2 Ch.’; it may be that the display device supports only 2-channel audio. Shuffle and Repeat Note that this section is valid for audio-CDs only. Repeat Press the RPT button on the remote control to cycle throught the repeat options. ‘Track’ or ‘Disc’ (i.e. all) repeat are available. When a track repeat is selected, the loop symbol on the front panel display is illuminated and the current track is repeated. If a disc repeat is selected, the loop symbol and ‘ALL’ are illuminated and the entire disc is repeated. To cancel repeat, press the RPT button until the Repeat symbols on the front panel display are no longer illuminated. Shuffle Press the P MODE button on the remote control to activate shuffle play. The ‘RAND’ (random play) indicator shows on the display, and the tracks are played in random order. To cancel random play, press the P MODE button for a second time. Note that: n Repeat and Shuffle cannot be set at the same time. n If a programmed sequence is shuffled using the P MODE button on the remote control, pressing P MODE again will not ‘unshuffle’ the programme. DV79 E-23 Remote-control codes The following table gives the IR-commands accepted by the DV79. The system code for the DV79 is 25 (in common with other Arcam DVD players). Power commands Command Decimal Code Power toggle 25–12 Power-on 25–123 Power-off 25–124 Playback control commands Command Decimal Code Track number ‘n’, (e.g., 1) 25–n (e.g., 25–1) Track forward 25–32 Track back 25–33 Fast forward 25–52 Fast rewind 25–50 Slow forward 25–30 Slow rewind 25–31 Open 25–45 Pause 25–48 Stop 25–54 Play 25–53 Display control commands Command Decimal Code Display 25–18 Advanced control commands Command Decimal Code Repeat toggle 25–29 Repeat A-B 25–59 Clear 25–58 Programme 25–41 Up 25–86 Down 25–85 Left 25–81 Right 25–80 OK 25–87 PMode 25–64 Subtitle 25–65 Title 25–66 Menu 25–67 Zoom 25–68 Audio 25–69 Mem (Bookmark) 25–70 Return 25–72 Angle 25–73 Setup 25–74 Status 25–75 Search 25–76 PL 25–77 Trim 25–37 Technical specifications General Power Requirements 100/115V or 230V AC, set by voltage selector switch on rear panel Power consumption < 35 VA Dimensions 435mm x 80mm x 350mm Weight net: 5.2kg; packed: 8.0kg Video outputs Composite video 1 x gold plated phono. 1V pk-pk in 75. S-Video 1 x 4-pin mini-DIN. Y 1V pk-pk in 75., C 0.3V pk-pk in 75. Component video Interlaced or Progressive3 gold plated phono sockets. Y 1V pk-pk in 75., Pb 0.7V pk-pk in 75., Pr 0.7V pk-pk in 75. SCART socket with RGB video All 0.7V in 75., composite video 1V in 75., and stereo audioAuto switching of TV with aspect ratio control HDMI 19-pin HDMI connector Supported video formats are: 720x576p, 720(1440)x576i, 720x480p, 720(1440)x480i, all with basic audio. Audio outputs Analogue audio outputs Stereo or multi-channel output on gold-plated phono sockets Output level 2.2V rms at 0dB signal, 4V rms with HDCD discs (left and right channels only) Frequency response 20Hz to 20kHz (+0.1db, –0.5dB) THD+N <0.005% for 1kHz 0dB signal, measured 22Hz–22kHz, unweighted Signal-to-noise ratio 105dB, measured 20Hz–20kHz, unweighted Digital audio output (IEC958) PCM/Dolby digital/MPEG/DTS on gold plated phono (coax) and TOSLINK (optical) Accessories supplied CR-415 Remote control 2 x AAA batteries mains lead E&EO NOTE: All specification values are typical unless otherwise stated. Continual improvement policy Arcam has a policy of continual improvement for its products. This means that designs and specifications are subject to change without notice. Guarantee Worldwide Guarantee This entitles you to have the unit repaired free of charge, during the fi...