Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
WHAT IS COVERED? Warranty repair is one (1) year limited warranty coverage: • 90 days from original date of purchase: - Parts and labor are included under warranty repair. • After 90 days up to one (1) year from original date of purchase. - Parts usage will be cover under warranty. - Labor will be charged at a flat rate. NOTE: If you don’t have proof of purchase, then your unit will be considered out-of-warranty. Out-of-warranty repairs will be charged at a flat labor rate, including any necessary parts. WHAT IS EXCLUDED? Your warranty does not cover: - Labor charges for installation or setup of the product, adjustment of customer controls on the product, and installation or repair of antenna systems outside of the product. - Product repair and/or part replacement because of misuse, accident, unauthorized repair or other cause not within the control of Apex Digital, Inc. - A product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modifications. - Incidental or consequential damages resulting from the product. (Some states do not allow the incidental or consequential damages, so the above exclusion may not apply to you. This includes, but is not limited to, prerecorded material, whether copyrighted or not copyrighted.) MAKE SURE YOU KEEP: Please keep your sales receipt or other document showing proof of purchase. Attach it to this owner’s manual and keep both nearby. Also keep the original box and packing material in case you need to return your product. BEFORE REQUESTING SERVICE: Please check your owner’s manual before requesting service. Adjustments of the controls discussed there may save you a service call. REMEMBER Keep a record of your model and serial number. MODEL # _____________________________ SERIAL # ____________________________ WHERE IS SERVICE AVAILABLE? Please contact: APEX DIGITAL, INC. 2919 E. Philadelphia St., Ontario, CA 91761 (909) 930-1239 customerservice@apexdigitalinc.com This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province. We reserve the rights to change the manual without further notice. 40 APEX DIGITAL AD-703A Memo DISCS AND OUTPUT SOUNDS DVD Video Discs VCD CD Sound recording system Dolby Digital MPEG 2 Linear PCM 48kHz 96kHz MPEG/ PCM44. 1kHz Audio setting on the setting screen SPDIF /RAW SPDIF /RAW SPDIF /RAW SPDIF /PCM SPDIF /RAW SPDIF /PCM SPDIF /RAW SPDIF /PCM SPDIF /RAW SPDIF /PCM SPDIF /RAW SPDIF /PCM ANALOG AUDIO OUT jacks _____ o _____ o _____ o o _____ o DIGITAL AUDIO OUT jack Dolby Digital bitstream PCM (48kHz) MPEG 2 bitstream PCM (48kHz) PCM (48kHz) PCM (48kHz) _____ PCM (44.1kHz) PCM (44.1kHz) ON VIDEO CD This DVD video player supports the VIDEO CD with PBC (Version 2.0) (PBC) is the abbreviation for Play Back Control. You can enjoy two kinds of playbacks, depending on types of disc. TYPE OF DISC HOW TO ENJOY VIDEO CD without PBC (VERSION 1.1) Audio and movie can be played back by operating the unit in the same way as the audio CD. VIDEO CD with PBC (VERSION 2.0) In addition to the operation of the VIDEO CD without PBC, you can enjoy a playback with interactive software and software with search function by using the menu displayed on the TV screen (Menu Playback). Some of the functions described in this manual may not work in some discs. AD-703A APEX DIGITAL 39 Before Calling Service Personnel Check the following guide for the possible cause of a problem before contacting service. SYMPTOMS AND CORRECTION Symptom No power Cause • The power plug is disconnected Correction • Connect the power plug into the wall outlet securely. No picture • The TV is not set to receive DVD output • The video cable is not connected securely • Select the appropriate video input mode on the TV so the picture from the DVD video player appears on the TV screen. • Connect the video cable into the jacks securely. No sound • The equipment connected with the audio cable is not set to receive DVD signal output. • The audio cables are not connected securely. • The power of the equipment connected with the audio cable is turned off. • The setting of output sound type is not correct. • Select the correct input mode of the audio receiver so you can listen to the sound from the DVD video player. • Connect the audio cable into the jacks securely. • Turn on the equipment connected with the audio cable. • Set the audio setting correctly. The playback picture has occasional distortion • The disc is dirty. • It is in fast forward reverse playback. • Eject the disc and clean it. • Sometimes a small amount of picture distortion may appear. This is not malfunction. Brightness is unstable or noises are produced on playback pictures • The copy protection’s effect. • Connect the DVD video player to the TV directly. The DVD video player • No disc is inserted. • Insert a disc. (Check th...