Assessments - 5, GPA: 4.2
(
)
)
|
Facilidade de uso
If Auto Play mode is set to On, this DVD player will search for title that has the longest playback time and then play back the title automatically. On: Auto Play function is active. Off: Auto Play function is not active. Note: The Auto Play function may not work for some DVDs. B.L.E. (Black Level Expansion) To select the black level of playback pictures. Set your preference and monitor’s ability. On: Expanded grey scale. (0 IRE cut off) Off: Standard grey scale. (7.5 IRE cut off) Remote Control Function Remote Control A/B/C Code Switching The remote control is capable of controlling three JVC video units independently. Each of the units can respond to one of three codes (A, B or C). The remote control is preset to send C code signals because your unit is initially set to respond to C code signals. You can easily modify your unit to respond to A or B code signals. 1/ I B ENTER x 1-3 • Keep pressing ENTER down during step 1. 1. Press the number key “1” for A, “2” for B or “3” for C to change the remote control code. 2. Press 1/& on the unit to turn off the unit with no video tape inserted. 3. Press B on the unit for over 5 seconds while the unit is turned off. The current code appears on the display window. 4. Press x on the remote control to change the unit’s code. The new code currently set on the remote control blinks on the display window for approximately 5 seconds, and is applied to the unit. 18 Operations - VCR This chapter describes how to operate the VCR and DVD. VCR Tape Playback Press the VCR button to select the device to be operated. Basic Instructions 1. Turn on the TV. 2. Tune the TV to the DVD+VCR output channel (CH 3 or 4) or if a direct VIDEO/AUDIO connection is made between the DVD+VCR and the TV, set the TV’s source selector to VIDEO. 3. Insert a pre-recorded video cassette. The indicator lights and the DVD+VCR powers on automatically. 4. If the (TIMER) indicator in the display window is lit, press POWER (1/:) once. 5. If a tape without a safety tab is inserted the unit starts playback automatically. If not, press PLAY (N). 6. Press STOP (x) to stop playback. If the tape reaches the end before you press STOP (x) the DVD+VCR automatically stops, rewinds and ejects the tape. Note: It is not necessary to select the tape speed for playback because it is automatically selected by the DVD+VCR. Also, during playback the TV/VCR selector switches to VCR mode automatically. Auto Tracking Automatic tracking adjusts the picture to remove snow or streaks and beings when: • A tape is played for the first time. • The tape speed (SP, LP, SLP) changes. • Streaks or snow appear due to scratches on the tape. Manual Tracking To manually adjust the tracking use the CH (- / +) buttons during playback. Notes: • Vertical jitter requires a very fine adjustment. • Tracking is automatically reset to normal when the tape is ejected or the power cord is unplugged for more than 3 seconds. Search This function lets you visually search for a tape section in either direction: forward and reverse. During the high-speed picture search modes, the audio is muted and horizontal lines (noise bars) appear. Also, a short time is needed to stabilize the tape speed when reentering the PLAY mode so slight interference may be observed during this time. To search: 1. Press REW (m) or FF (M) during playback. 2. To return to playback, press PLAY (N). Note: After 3 minutes in SEARCH mode the DVD+VCR returns to PLAY mode to protect the tape and video heads. Still Picture and Frame-by-Frame Playback 1. Press PAUSE (X) during playback. A still picture appears on the TV screen and the audio is muted. 2. If the still picture vibrates vertically, stabilize it by using CH (- / +) on the remote control. 3. Press PAUSE (X) repeatedly to advance the video picture one frame at a time. 4. To return to playback, press PLAY (N). Note: After 5 minutes in STILL mode the DVD+VCR stops to protect the tape and video heads. Operation 19 Slow Motion 1. While in still mode, press FF (M). The tape is played at a speed 1/19 times slower than the normal speed. 2. Use CH (- / +) on the Remote Control if necessary to adjust the tracking. 3. To return to the normal speed, press PLAY (N). Notes: • During slow motion, audio is muted and horizontal lines (noise bars) may appear on the TV screen. This is normal. • After 3 minutes in SLOW MOTION mode the DVD+VCR goes back to PLAY mode to protect the tape and video heads. CM SKIP (Commercial Skip) This feature is useful for skipping commercials or short program segments. 1. Press vin playback mode. The DVD+VCR performs a fast forward picture search through 30 seconds of recording. 2. Press vagain to extend the search time by an addition 30 seconds. The maximum search time is 3 minutes. 3. When the search is complete, the DVD+VCR goes into playback mode automatically. VHS Hi-Fi Stereo/ MTS Broadcast This DVD+VCR is equipped with the VHS Hi-Fi audio sound system for recording and playback. The information below gives a br...