Assessments - 2, GPA: 4.5
(
)
)
|
Facilidade de uso
Both 8 cm and 12 cm discs can be used, but 8 cm discs can only be used when the burner is connected to a PC. . A double-layer disc cannot be used while the burner is connected to a PC or camera. . Optimal performance of the burner may not be possible depending on the disc used. Using discs of manufacturers for which compatibility has been confirmed is recommended. . The appearance and specifications of the product may change without notice. . Any CD recorded using the packet-write method cannot be played. . Operation is not guaranteed for any CD not compliant with the CD-DA standard (copy control CD). . DVD-RW 6x media cannot be used with the camera. EN 5 Connections OFF ON USB Cable AC Adapter (provided for the burner) Power Cord To AC Outlet AC Adapter (provided for the camera) To DC Connector To DC Connector To USB Connector To USB Connector Hard Disk Camera Rear face of the burner Connecting to the Camera Make sure the power switch of the burner is off. Connect the AC adapter to the burner. Connect the power cord to the AC adapter. Connect the power cord to an AC outlet. Connect the provided USB cable to the USB connector of the burner. Connect the camera to an AC outlet. ( Refer to the instruction manual for the camera.) Turn on the camera. Turn on the burner. The light on the front of the burner lights in green. Connect the provided USB cable to the USB connector of the camera. NOTES: . Insert a disc after [INSERT DISC] is displayed on the camera. . Be sure to use the provided USB cable to connect the burner and the camera. . When using a camera, make sure the power is provided with the AC adapter, not the battery. . Do not subject the camera or burner to vibration or mechanical shock while writing to a disc. Be especially careful if the camera is placed on the burner during writing. . Refer to “Dubbing Video Files To DVD Discs” in the manual for writing discs. . The DVD discs that are written with this unit cannot be played with some DVD recorders/players. In that case, use [PLAY DVD] of the camera to playback discs. Connecting to PC Make sure the power switch of the burner is off. Connect the AC adapter to the burner. Connect the power cord to the AC adapter. Connect the power cord to an AC outlet. Turn on the burner. The light on the front of the burner lights in green. Turn on the PC. Connect the burner to the PC with the USB cable. NOTE: To connect the burner to a PC, use the USB cable provided with the camera. USB Cable (provided for the camera) AC Adapter (provided for the burner) Power Cord 6 EN Power2Go 4 is software for writing video, image, audio, and other data files to data DVDs. System Requirements The following shows the system requirements for installation. * If you use USB1.1 cable, it will take approximately 3 hours to write. Installation Procedure 1. Insert the installation CD-ROM in the CD-ROM drive. 2. The language selection screen appears. 3. The setup screen appears and then the installation start screen appears. Click [Next]. 4. Enter the user information and then click [Next]. Follow the on-screen instructions. 5. Installation starts. 6. The following screen appears when the installation is complete. Select the desired checkboxes and then click [Finish]. . It is recommended to select [Register now]. The installation is now finished. NOTES: . The above procedure is just a brief explanation on installing the software. For details on operating Power2Go 4, refer to the User’s guide, Help, and ReadMe installed at the same time as the software. You can view the User's guide, Help, and ReadMe from the start menu of the PC. . This product does not apply to write files into CD-R or CD-RW. Also, it is not responded to all the functions of Power2Go 4. Writing Software — CyberLink Power2Go 4 — Operating system Windows® 2000 Professional SP4 [2000] (preinstalled), Windows® XP Home Edition [XP] (preinstalled), or Windows® XP Professional [XP] (preinstalled) CPU Intel® Pentium® III, at least 800 MHz (Intel® Pentium® 4, at least 2 GHz recommended) Free hard disk space At least 50 MB for installation At least 5 GB recommended for making DVDs RAM At least 128 MB (at least 256 MB recommended) Connector USB 2.0/1.1* connector Display Must be capable of displaying 800 x 600 dots CyberLink Power2Go 4 Contact Information For information on CyberLink Power2Go 4 or other products, use the following contact information. Telephone/fax support Paid voice support Support web/e-mail Location Language Office hours (Mon. to Fri.) Phone # Fax # Germany English / German / French / Spanish / Italian / Dutch 9:00 am to 5:00 pm +49-700-462-92375 +49-241-70525-25 Taiwan Mandarin 9:00 am to 6:00 pm +886-2-8667-1298 ext. 333 +886-2-8667-1300 Location Language Lines are open (Mon. to Fri.) URL U.S.A. English 1:00 pm to 10:00 pm CST new_site/voice_support.jsp Language URL/e-mail address English German /...