Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
All that is needed from you now is to click the “Finish” button. 2.) CAMCORDER DRIVER INSTALLATION 1. DO NOT PLUG YOUR CAMCORDER INTO THE PYRO BOARD UNTIL YOU HAVE INSTALLED THE CAMCORDER DRIVERS from PYRO CD #1. 2. Insert the PYRO 1394DV CD into your CD-ROM drive. INSTALL DRIVERS. The driver install will automatically install the correct version drivers to match your operating system. THE DRIVERS WILL INSTALL ONLY IF YOUR PYRO CARD IS INSTALLED FIRST. 3. If you have Windows ME or Windows 2000 it may not be necessary to install any camcorder drivers. 1 3.) CONNECTING THE DIGITAL VIDEO CAMCORDER Once you have installed the camcorder drivers you are ready to connect your camcorder to the PYRO Card. Follow these steps to ensure that the operating system recognizes your camcorder and you are familiar with the camcorder driver your system is using. 1. Use the External Power source supplied with your camcorder. Many camcorders do not have enough power when running from the battery. 2. Turn the Camcorder ON to the VCR/VTR mode. 3. Connect the DV Cable supplied with the PYRO to any available port on the PYRO card and your digital camcorder. 4. Your Camcorder will be recognized, as a new device by Windows and the camcorder driver will be loaded. In some cases Windows may ask for the Windows 98, WinME or Win2000 CD to load other needed files. 5. Open Device Manager (Start, Settings,Control Panel, System, Device Manager Tab). Check to see how your camcorder is listed. If you are using Win98 your camcorder will appear as “1394 DV Camcorder” under “Sound, Video and Game Controllers”. You are using the Texas Instruments camcorder driver. If you are using Win98SE, WinMe or Win2000 your camcorder will appear in Device Manager under “Imaging Device” and will be listed as a “DV camera or VCR”. Your camcorder is using the Microsoft camcorder drivers. 1 Camcorder Driver information and Descriptors: Windows 98 Texas Instruments DV camcorder driver Listed in Device Under: “Sound, Video and Game Controllers” Shown as: 1394DV camcorder File name: Dvcam.sys Device Control Selection: TI 1394 Device Control Output to camcorder Selection: TI DV Record Win98SE, WinME or Win2000 Microsoft DV camcorder driver Listed in Device Manager: “Imaging Device” Shown as: DV camera or VCR File name: MSDV.sys Device Control Selection: MS 1394 Device Control Output to camcorder Selection: MS DV Record 4.) INSTALL Video Studio 1. Connect your camcorder. Turn on to VTR/VCR Mode. 2. INSTALL Video Studio from PYRO CD#1. Follow the installation instructions. INSTALL EVERYTHING including Quick Time and the Microsoft NetShow services. 3. When the installation asks you to determine which camcorder drivers you have installed, let it search, then SELECT both the MICROSOFT DV driver and the TEXAS INSTRUMENTS DV Driver. 4. Re-Boot when the Installation is complete. 1 RUNNING VIDEO STUDIO for the First Time 1. Run Video Studio. 2. Before Starting a Project Click on the (G) Global Properties button. You will see a menu displayed like this. The Black Dot is highlighted next to the active video capture device. 3. a. Select Change Capture Plug-in and choose Ulead Direct Show Capture Plug-in., Click OK. b. Select Device Control and set the current device to TI 1394 Device Control or MS1394 depending upon which driver you are using (See Connecting Digital Camcorder section above). Click OK. c. Click on Preferences to turn on/off the user guide and the enable/disable “Click OK before capture” function. When learning to use Video Studio you will want to have the User Guide turned on. The User Guide will give you a short overview of each mode as you move from Capture to Storyboard to effects, etc. You can also access Video Studio HELP at any time by touching the “F1” button on your keyboard. Your Camcorder is a Plug & Play device: Your camcorder is a plug and play device. It is only present in device manager if it is plugged in and turned on. Your camcorder must appear in Device Manager for Video Studio or any other software program to use the camcorder. The camcorder must always be “ON” before starting the Video Studio application. If you are not able to Select Ulead Direct Show Capture Plug-in or change Device Control settings, then please check device manager again to be sure that your computer has detected your camcorder. If your camcorder goes into “Sleep Mode” or is turned off, it will disappear from Device Manager. If your camcorder is not plugged in to the PYRO card, your computer will not detect it. 1 INSTALLATION SUMMARY: 1.) Install PYRO Card and install 1394 bus controller drivers from the Windows CD. 2.) Install camcorder drivers from PYRO CD #1 3.) Apply external power to your camcorder 4.) Turn Camcorder on to VCR/VTR mode 5.) Plug camcorder into PYRO card. Camcorder is recognized as new device. 6.) Check Device Manager to determine which camcorder driver you are using. 7.) Install Video Studio 4, Quick Time and Microsoft NetShow Services. 8.) Select Camcor...