Assessments - 1, GPA: 3
(
)
)
|
Facilidade de uso
PROGRAM DETAILS LENGTH: Indicates the run length of a program. TIME REMAINING: Indicates the remaining time of a program. RATING: Indicates the rating of the current program (N/A, G, PG, PG-13, R, NC-17, X and Not Rated). The rating N/A means that the motion picture ratings are not applicable to this program. CH 4 SP WABC STEREO “Home video” JUL 5 , SAT 2:15 PM Easy Information Screen (Station ID) PROGRAM DETAILS “Home video” LENGTH 01:00 TIME REMAINING 00:26 RATING N/A Easy Information Screen (Program details) On-Screen Menus Setup The SETUP, clock setting (CLOCK), and timer recordings (PROGRAM) are accessed conveniently with the on-screen menus, that lead you through each step. The following pages describe the on-screen menu selections available. Menu Selection Your VCR allows remote control adjustment of several features. 1 11 Press MENU and the MAIN menu will appear. 2 22 Select the desired menu with v/V button and then press SELECT/ENTER. ote Menus remain on-screen for 3 minutes. MAIN MENU CLOCK SET (page 16) PROGRAM (page 22) TUNING (page 15) SETUP (page 15) 3 33 Press MENU when finished. 14 Before VCR Operation (Continued) Before VCR Operation (Continued) Setting the VCR Setup Menu Options 1 11 Press MENU and the MAIN menu will appear. 2 22 Use v vv/V VV to select the SETUP menu, then press SELECT/ENTER. The SETUP menu will appear. 3 33 Use v vv/V VV to choose a desired option on the SETUP menu. Then use b bb/B BB to choose a desired setting. FUNCTION OSD The on-screen display of this DVD+VCR can be turned on or off. • FUNCTION OSD can be switched between ON and OFF by using b/B. LANGUAGE SELECT The on-screen programming of this DVD+VCR can be displayed in either English, Spanish, or French. • LANGUAGE SELECT can be switched among ENGLISH, SPANISH and FRENCH by using b/B. AUDIO MODE The DVD+VCR has two separate audio playback systems, the high quality VHS Hi-Fi system and standard NORMAL mono system. The same audio is generally recorded on both systems. The VHS Hi-Fi system plays on separate (left and right) channels, and the NORMAL system plays monaural sound. The normal track is always played so the cassette can be played on a DVD+VCR that does not have VHS Hi-Fi. • AUDIO MODE can be switched between HI-FI and NORMAL by using b/B. BROADCAST TYPE (STEREO/SAP/MONO) Multichannel Television Sound (MTS) carries stereo and/or Second Audio Program (SAP) bilingual signals. Set this display to the desired position when both MTS stereo and SAP signals are received. When only one of the MTS signal is received, the DVD+VCR automatically selects the corresponding receiving mode (Stereo or SAP) regardless of the selected position. For normal operation, the display should be in the STEREO position. The DVD+VCR will then record a STEREO program when available, and record a mono program IF the program is NOT IN STEREO. For weak STEREO and/or SAP broadcasts, changing the display to mono may give clearer sound. • BROADCAST TYPE can be switched among STEREO, SAP, and MONO by using b/B. AUDIO OUTPUT (STEREO/LEFT/RIGHT) Used during playback [when AUDIO MODE (HI-FI/NORMAL) is in HI-FI position] for selecting the audio output signals from the AUDIO OUT terminals (L ch and R ch), and RF.OUT. This display setting should normally be left in the stereo position, so that when a stereo tape is played, the stereo sound will be heard through the left and right channels. If a mono tape is played and the audio output is set to stereo, the same mono sound will be heard from both left and right channels. • AUDIO OUTPUT can be switched among STEREO, LEFT, and RIGHT by using b/B. 4 44 Press MENU when finished. Channel Selection This DVD+VCR is equipped with a frequency synthesized tuner capable of receiving up to 181 channels. These include VHF channels 2-13, UHF channels 14-69 and CATV channels 1-125. Preparation: • Connect the DVD+VCR to the desired type of antenna or cable TV system, as shown in Connecting Antenna/Cable TV to DVD+VCR on page 11. 1 11 AUTO CHANNEL PROGRAMMING Press MENU and the MAIN menu will appear. 2 22 Use v vv/V VV to select the TUNING menu, then press SELECT/ENTER. The TUNING menu will appear. 3 33 Use V VV to choose the SOURCE SELECT option, then use b bb/B BB to select TUNER. Press b/B repeatedly to switch between TUNER, LINE1 and LINE2. 4 44 Use v vv/V VV to choose the AUTO CHANNEL SET option, then use b bb/B BB to set the channel. The tuner will automatically cycle through all available channels in the area and place them in the tuner’s memory. 5 55 After the AUTO CHANNEL SET has found all the available channels, set the TUNING BAND on the Tuning Menu, Choose TV or CATV using the b bb/B BB arrows. 6 66 Press MENU to return to the TV screen. 7 77 Use v vv/V VV or CH (v vv/V VV) on the front panel to cycle the DVD+VCR through the channels in memory. TO ADD OR ERASE CHANNELS FROM MEMORY This feature allows you to add or erase channels from memory manually. 1 Press V VV to choose the CH. ADD/DEL option on the TU...