(See "TO RESET THE SETUP MENU", page 52.) Then set all the settings again including the "Ratings" setting. 8 After confirming the password, press ENTER again. Your entry is saved. 9 Press SET UP to exit the setup menu. CHANGING THE SETTINGS 1 Select "Ratings" by using i/k in the setup menu. Then press ENTER. 2 Input four-digit password and press ENTER. 3 Select an item. Choice The Item ik ENTER : Choice item SETUP : Completion RETURN : Previous menu 1 2 3 4 Unlock Player Change Password Change L

If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents, such as alcohol, benzine, or thinner, as these might damage the surface of the unit. To obtain a clear picture The DVD player is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn down, the picture quality will be poor. Regular inspection and maintenance are recommended after every 1,000 hours of use. (This depends on t

NOTES 1 = Q 03 EN 2ch OFF FR ON 1 • The first subtitles displayed will be in the subtitle language selected with the subtitle setting. (See page 33.) If there are no subtitles in that language on the disc, the disc will determine which subtitles are shown. • Subtitles may only be changed with discs which contain more than one set of subtitles. • The number of subtitle languages varies from disc to disc. • With some discs, it may take a few moments after you press SUBTITLE SELECT for the new subt

.1 This changes condensed audio signals to PCM and outputs them. CONTINUE ENGLISH 40 Connecting the external equipment (continued) Connecting to a dolby digital (AC-3) decoder During playback of a DVD recorded in Dolby Digital (AC-3)/5.1ch surround, bit streams of Dolby Digital are output from the optical audio output terminals of this unit. By connecting to a dolby digital decoder, you can enjoy theater-quality realistic audio sound right in your own home. Set the “Digital output” to “Bit Strea

18 Connecting to a TV or monitor with component video input connectors ....... 19 Basic Operations Playback ................................................................. 20 Still (Pause) ...................................................... 21 Frame advance ................................................ 21 Resuming playback ........................................ 21 Fast forward and reverse ............................... 22 Slow playback..................................................

The “aiwa DVD VIDEO” screen appears on the TV screen. 2 Press zOPEN/CLOSE. The disc tray opens. 3 Load a disc. Place a disc in the tray guides (depressed area) with the label side facing up. When loading an 8-cm disc, place it in the inner depression. 4 Press zOPEN/CLOSE. The disc tray closes, and the unit automatically starts playing the disc. If playback does not start, press c. • If a disc is placed in upside down, “DISC Error” will be indicated and the disc tray will open. MP3 VCD CD DVD TIT

• The remote control may not operate correctly when: -The line of sight between the remote control and the unit is exposed to intense light, such as direct sunlight -There is fluorescent lighting near the remote sensor in the display window. -Other remote controls are used nearby (those of a TV set, etc.). PREPARATIONS 19 20 Getting ready to play • Turn on the television, and set its video source (Video 1, Video 2, Video 3, etc.) to the one connected to the DVD player. • Turn on the audio device

A stereo system or an amplifier Digital input jack See B. Analog audio input jacks (L/R) See C. An AV receiver equipped with Dolby Digital decoder or DTS decoder Digital input jack See D. An AV receiver equipped with Dolby Pro Logic Surround Analog audio input jacks (L/R) See E. Before making connections • Connect the AC cords of the unit and external equipment at the end, after finishing the other connections. •Insert the plugs completely into the jacks. Loose connections may produce a humming

cancel a program, select “--” under “T,” then press ENTER. To cancel all the titles, chapters, or tracks in the programmed order 1 Follow Steps 1 and 2 of “Creating your own program (Program Play).” 2 Press X and select “ALL CLEAR.” 3 Press ENTER. z Hint You can do Repeat Play or Shuffle Play of the programmed titles, chapters, or tracks. During Program Play, follow the steps of “Repeat Play” (page 34) or “Shuffle Play” (page 33). Notes • When playing Super VCDs, the total time of the programmed