Assessments - 3, GPA: 4.7
(
)
)
|
Facilidade de uso
On-Off Switch Shuts off all but auxiliary outlet. Long-Range Operation Up to 100 feet (operating range may be affected by material and construction of home). Auxiliary Outlet 120 VAC, 5 AMP. (MAX.) © 2004 DESA Specialty ProductsTM 598-1186-01 CHANNEL SETTING Your new TRINE wireless door chime uses a digital coding system to create eight selectable channels. It is not necessary to change the setting, since the wireless door chime is factory pre-set. However, if interference from other devices occurs or if you wish to match to other TRINE wireless door chimes, the channel must have the same settings to operate properly. On the back of the chime you will find connectors numbered one through three. These are for your channel selections. Simply remove one or more connectors to set a new channel. To change the push button security code, remove one or more of the connectors (1 through 3) on the push button. You must also remove the corresponding connectors on the chime receiver (also 1 through 3). If your chime receiver has more connectors (1 through 6), use only the first 3 (1 through 3). It does not matter which connector(s) you remove on the push button. Just be sure they have the same corresponding numbers as the connector(s) that you will remove from the receiver. If connector numbers do not match, your system will not work. SUGGESTION: Begin by removing just one push button connector and one matching chime connector. Test to see if this eliminated the false triggering problem. If false triggering still occurs, repeat process. 123 321 AUX. ON/OFF OUTLET CONNECTORS VOLUME CONTROL The push button enclosed is an eight (8) note Westminster push button which will give you 8 flashes combined with an 8-note Westminster melody. 598-1186-01 -2 OPERATION On the side of the chime you will find an on/off switch. Slide switch to ON position. The volume control is also located on the side of the chime. To adjust volume, simply slide to desired volume setting. There is an electric receptacle on the opposite side of the chime, providing additional convenience. INSTALLING THE CHIME(S) Place the chime or chimes in logical location (that will afford the greatest usefulness). You need merely plug in to an electrical outlet. Do not place chimes near metal objects such as refrigerators, cabinets or washing machines. Doing so may prevent signal from being clearly received. MOUNTING THE PUSH BUTTON(S) Select an appropriate location near the entrance door. Using a flat head screwdriver, press the tab on the bottom of the push button, lift the back plate and use it as a template to mark the mounting hole locations. Drill two 3/16” diameter holes, align the back with the holes. Using the screws provided, attach the push button to the surface. Snap the push button housing in place over the mounted back. INSTALLING BATTERIES INTO PUSH BUTTON(S) Your new Strobe Chime push button uses a 12 volt battery (Trine A-23). Simply insert into battery compartment by lifting back lid, inserting and closing. 598-1186-01 -3 MAINTENANCE Always replace old or weak battery In push button. Keep chime dry. If wet, dry immediately. Do not use cleaning solvents on electronic products. Solvents contain chemicals that can damage circuitry. Use damp towel or rag to clean. Dry immediately. Regulatory Information This device (H8A34RX or BJ4-400TX) complies with Part 15 of the FCC Rules and RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmfulinterference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The user is cautioned that changes or modifications not expresslyapproved by the party responsible for regulatory compliance could void the user.s authority to operate the equipment. Technical Service (Do Not Send Products) If you experience a problem, follow this guide. You may also want to visit our Website at: If the problem persists, call* for assistance at 1-800-858-8501, 7:30 AM to 4:30 PM CST (M-F). You may also write* to: DESA Specialty ProductsTM P.O. Box 90004, Bowling Green, KY 42102-9004ATTN: Technical Service Specialty Products * If contacting Technical Service, please have the following information available: Model Number, Date of Purchase, and Place of Purchase. No Service Parts Available for this Product 598-1186-01 -4 ONE YEAR LIMITED WARRANTY This is a “Limited Warranty” which gives you specific legal rights. You may also have other rights which vary from state to state or province to province. For a period of one year from the date of purchase, any malfunction caused by factory defective parts or workmanship will be corrected at no charge to you. Batteries are not covered. To obtain a refund or a replacement, return the product to the place of purchase. Not Covered -Repair service, adjustment and calibration due to misuse, abuse or negligence, light bulbs and other expendable items are not cover...