Assessments - 2, GPA: 5
(
)
)
|
Facilidade de uso
Color changing Solar Light Set. Led turns on automatically and changes colors in red, green and blue sequence. Save This Manual You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Keep this manual and invoice in a safe and dry place for future reference. GENERAL SAFETY RULES WARNING! READ AND UNDERSTAND ALL INSTRUCTIONSFailure to follow all instructions listed below may result in electric shock, fire, and/or serious injury. SAVE THESE INSTRUCTIONS Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. Keep bystanders, children, and visitors away while assembling and operating this product. Distractions can cause you to lose control. Keep children out of the work area. This product is not a toy; keep children away from this Solar Light. Stay alert. Watch what you are doing, and use common sense when assembling and operating the Solar Light Set. A moment of inattention while operating this product may result in serious personal injury. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Do not overreach. Keep proper footing and balance at all times. Use safety equipment. Always wear eye protection. Always wear ANSI-approved safety goggles when performing maintenance on this product. Do not force the product. Use the correct product for your application. The correct product will do the job better and safer at the rate for which it is designed. Do not force the product and do not use it for a purpose for which it is not intended. Do not use this product if the Power Switch does not turn it on or off. Any product that cannot be controlled with the Power Switch is dangerous and must be replaced. Store idle products out of reach of children and other untrained persons. This product is dangerous in the hands of untrained users. Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one product may become hazardous when used on another product. When servicing a product, use only identical replacement parts. Follow instructions in the “Inspection, Maintenance, And Cleaning” section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury. Maintain labels and nameplates on the product. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement. Maintain a safe working environment. Make sure there is adequate surrounding workspace. Do not use this product in a damp or wet location. People with pacemakers should consult their physician(s) before using this product. Electromagnetic fields in close proximity to a heart pacemaker could cause interference to or failure of the pacemaker. In addition, people with pacemakers should adhere to the following: • Avoid operating power tools alone. • Don’t use a power tool with the power switch locked on. • If powered via a power cord be certain that the tool is properly grounded. A ground fault interrupt (GFCI) system is also a good precaution. This inexpensive device is a good safety measure because it prevents a sustained electrical shock. • Properly maintain and inspect all tools before use to avoid electrical shock. Keep the Solar Panel free of dirt, dust and grime. Dust covering the Solar Panel will block out sunlight causing a decrease or stoppage of efficiency in recharging the battery. WARNING: NiCad batteries must be disposed of properly. Do not incinerate. The battery may burst, causing personal injury and/or property damage. Contact your local hazardous waste disposal authority for proper disposal. Unpacking When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. Assembly AND OPERATING Instructions Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual. WARNING! Make sure the Power Switch of the product is in its “OFF” position before making any adjustments to the product. Decide where you want to place the Solar Light Set. Choose a location that receives full, direct sunlight a minimum of six hours a day. The location should not be near nighttime light sources such as porch lights or streetlights as this will cause the Solar Light Set to remain off. The Solar Light Set will need to charge for at least twelve hours before using it for the first time. Allow to charge for two sunny days before the Solar Light Set is fully charged. During initial charging, set the switch to “Off”. Located underneath the Battery Cover (9) is a Auto/Off Switch (7). The Switch can be set to either “Auto” or “Off”. Set the Auto/Off Switch to “Auto.”-see Figure 1 and...