Assessments - 2, GPA: 5
(
)
)
|
Facilidade de uso
PLAN INSTALLATION INTRODUCTION The AM-KP keypad is designed for use with Linear’s AM/II access control system. The keypad is housed in a rugged cast aluminum enclosure. The die-cast keys have bright, easy-to-read yellow graphics. Each key has a positive tactile “click” feel when pressed. An internal sounder signals when a key is pressed. The keypad can be mounted to a pedestal or directly to a wall. A keylock secures the keypad to the mounting backplate. An incandescent panel lamp lights the keypad for nighttime use. Red, green and yellow indicators show power, access and lockout conditions. The AM-KP is normally powered from the AM/II control, or can be powered locally from a 12 VDC power supply. Robust static and lightning protection circuits safeguard the keypad’s electronics. A rotary switch selects the keypad’s device address. Each device connected to the AM/II must be set to a different device address. 3. MOUNT BACKPLATE 1. AM-KP FEATURES 4. ROUTE CABLE PLAN THE LOCATIONS FOR CONTROL AND REMOTE DEVICES PLAN CABLE RUNS BETWEEN CONTROL AND REMOTE DEVICES APARTMENTS AM-KP ON PEDESTAL izzr \ APARTMENT GATE INSTALLATION AM/II CONTROL AM/II EACH AM-KP KEYPAD EQUALS 9 LOAD UNITS CABLE LENGTH FORMULA FOR EACH KEYPAD USED IN SYSTEM CABLE RUN CABLE TYPE FORMULA 300 FEET MAXIMUM BELDEN 9931 (24 AWG) FEET x LOAD UNITS < 3,000 MAXIMUM 500 FEET MAXIMUM WEICO 9405 (20 AWG) FEET x LOAD UNITS < 10,000 MAXIMUM HOMERUN WIRE EACH KEYPAD (1000 FEET WIRE MAXIMUM ALLOWED IN SYSTEM) 5. CONNECT CABLE 6. SET DEVICE ADDRESS 7. SECURE & LOCK CASE AM/II f m KEYP AD IN :-f + o o o o o o © -9- 00 I I à à s s ¿> PWR | GND | DAT11 DATO | DVAL | CLK 0 AM- USE A SMALL SCREWDRIVER TO SET THE DEVICE ADDRESS SWITCH FOR LOCAL POWER, DISCONNECT RED WIRE FROM "PWR" CONNECTION ON AM-KP AND CONNECT EXTERNAL 12 VDC SUPPLY (+ TO PWR & - TO GND) NOTE: AM/II * MUST BE CONNECTED TO AM-KP "GND" 8. PROGRAM SYSTEM PROGRAM THE AM/II TO CONFIGURE THE KEYPAD(S) AND SET THE ENTRY CODES REFER TO THE AM/II PROGRAMMING INSTRUCTIONS FOR DETAILS 8 pj —T&- 9. TEST KEYPAD 1. RED INDICATOR SHOULD BE LIT 2. ENTER VALID CODE 3. RED INDICATOR SHOULD TURN GREEN AND PROGRAMMED RELAY IN AM/II SHOULD ACTIVATE YELLOW INDICATOR LIGHTS WHEN KEYPAD IS LOCKED OUT OR BUSY LINEAR LIMITED WARRANTY This Linear product is warranted against defects in material and workmanship for twelve (12) months. The Warranty Expiration Date is labeled on the product. This warranty extends only to wholesale customers who buy direct from Linear or through Linear’s normal distribution channels. Linear does not warrant this product to consumers. Consumers should inquire from their selling dealer as to the nature of the dealer’s warranty, if any. There are no obligations or liabilities on the part of Linear corporation for consequential damages arising out of or in connection with use or performance of this product or other indirect damages with respect to loss of property, reven...
Este manual também é adequado para os modelos :Portas e janelas - AM-KP (270.14 kb)
Portas e janelas - AM-KP (270.14 kb)
Portas e janelas - AM-KP (270.14 kb)
Portas e janelas - AM-KP (270.14 kb)