Since 1876, H.B. Ives quality hardware has betped build the most distinguished homes In America. DUTCH DOOR QUADRANT FOR USE ON DUTCH DOORS. Provides easy, positive latching of doors. Holds its position — Heavy spring washer provides constant tension. NON-HANDED Quadrant may be installed on either left or right lvnd opening doors. INSTALLATION INSTRUCTIONS TOOLS REQUIRED Drill, 1/8” drill bit for pilot holes, Phillips screwdriver and pencil. 1. Position Quadrant (as shown in illustration) and measure 1-3/16" down from point where doors meet Mark screw holes of Quadrant plate, drill and secure. 2. Measure up vertically 2-5/16" from center of top screw holes of Quadrant plate and mark centers of bottom screw holes of knob plate. 3- Holding knob plate in place, swing Quadrant into lock position and check alignment. Drill and secure. NOTE: When door is locked, it is important that top section of door be locked to side Jamb for added security. Recommended use of IVES C-054 OR C55 DUTCH DOOR BOLTS. MAINTENANCE INSTRUCTIONS H.B. Ives Solid Brass products have a dear, protective lacquer coating which helps prevent discoloration, Do not use abrasive waxes or cleaners. ASK FOR OTHER FINE DECORATIVE HARDWARE BY H.B. IVES 0 IS) SURFACE BOLTS DUTCH DOOR BOLTS DUTCH DOOR QUADRANT DELUXE SURJACE BOLTS 00072 DUTCH DOOR QUODRRNT C56 B3 BRT MADE IN U.SA 044074000726 56 - DUTCH DOOR QUADRANT IVES No. 56 MADE IN U.S.A. DUTCH DOOR QUADRANT This illustration shows the Ives non-handed Dutch Door Quadrant properly applied. When the door is locked it is important that the top section be locked to the side jamb with a ----- suitable dead bolt for _[ added security and to IIPPFB ^FfTlflN prevent undue stress on the Quadrant. LOWER SECTION P.N. 127S72 H.B. IVES A HARROW COMPANY P.O. BOX 1M7. NEW HAVEN, CONN. 0650«...