Instruções de Operação Canon, Modelo FAX-L2000IP
Facilidade de uso
• To avoid paper jams and possible damage to the machine, avoid wrinkled or creased paper, carbon paper, curled paper, coated paper, and onion skin or other very thin papers. • To avoid paper jams or damaging the machine, inspect the documents carefully and make sure they are free of pins, staples, paper clips, and other metal fasteners. • Make sure all the documents are dry. They should not have wet ink, glue, or paste on their surfaces. • Before you feed a stack of documents into the machine, make sure all the pages are of the same size and thickness. Do not attempt to feed documents of mixed sizes and thicknesses in the same stack. 2 2 Documents and Print Media NOTE • The document guides on the document feeder tray can be adjusted to fit the width of nonstandard size paper. For best results, all of the sheets in the stack should be of the same width. • Although the document guides on the document feeder tray indicate that 11" x 17" paper (279 mm) can be placed in the document feeder tray, the effective scanning width is up to A4 paper (208 mm). • For documents that are larger or smaller than these recommended sizes, reduce or enlarge them on a copy machine, then send the copy. (See Chapter 14, “Appendix”, in the Facsimile Guide.) • The machine does not scan completely to the edges of the paper, and anything beyond this recommended margin is not scanned for sending. (See Chapter 14, “Appendix”, in the Facsimile Guide.) Setting the Document on the Machine You can set a stack of up to 50 letter or A4 size pages into the document feeder for scanning. 1 Place your document face up in the document feeder tray. If the document is too long for the document feeder tray, pull out the document extension tray. Extension Tray 2-2 Setting a Document 2 Adjust the document guides to fit the width of your document. 2 IMPORTANT • Do not set the document guides so tight against the sides of the document, that the document bends. Documents and Print Media 3 Make sure the document is below the load limit marks for A4/LTR sizes. Setting a Document 2-3 4 Insert the document fully into the feeder until the leading edges of the document stops. The following messages appear on the LCD display: MEM IN USE 4% DOCUMENT READY 2 Documents and Print Media NOTE • If the machine already displays before you set your document, a small-sized document, such as a STMT document, may have remained in the automatic document feeder from a previous fax or copy job. In such a case, remove the small-sized document from the automatic document feeder, and set your document. (See Chapter 7, “Troubleshooting”, in the Reference Guide.) Adjusting the Scan Settings Canon’s original UHQ (Ultra High Quality) imaging technology enables you to send documents or make copies that are very close to the quality of the original document. For best results, adjust the scan settings for special documents before sending or copying. NOTE • The light indicators on the operation panel tell you the current settings. • After the document is copied, the settings return to the previously set settings before copying. 1 Press the appropriate key underneath the indicators repeatedly to illuminate the desired scan/copy setting. Ultra Fine Super Fine Darker Fine Standard Text Standard Lighter Text/Photo Resolution Contrast Document Type 2-4 Setting a Document [Resolution]: Adjusts the resolution for documents with fine text and thin lines. The higher the resolution, the higher the output quality, but the slower the scanning speed. When copying, the resolution is fixed to [Ultra Fine]. Ultra Fine: Eight times the Standard resolution. Super Fine: Four times the Standard resolution. Fine: Twice the Standard resolution. Standard: For normal printed or typewritten text. [Contrast]: Adjusts the lightness/darkness of the document pages scanned for sending/copying. Darker: For documents with light text or colors. Standard: For normal printed or typewritten text. Lighter: For documents with dark text or colors. [Document Select for documents containing text only or both text and Type]: photographs on the same page. Text: For documents that contain text without photographs. Text/Photo: For documents that contain text and photographs on the same page. Automatically, the machine adjusts the quality of the image and text on the same page. NOTE • If the other party does not have the Ultra Fine setting, and you send a document with ‘Text/Photo’ set as the document type setting and ‘Ultra Fine’ is set for the resolution setting, the image the other party receives reproduces at the other party’s maximum resolution setting. 2 Documents and Print Media Setting a Document 2-5 Loading Paper 2 Documents and Print Media This section describes how to load paper into the paper cassettes. NOTE • For instructions explaining how to load paper into the MP tray, see Chapter 2, “Getting Started”, in the Reference Guide. Paper Cassettes If your machine comes with more than one paper cassettes, y...
Este manual também é adequado para os modelos :
Fax - FAX-L2000 (2.12 mb)
)
