Assessments - 3, GPA: 4.7
(
)
)
|
Facilidade de uso
Printing side is back. Tab Tension bar Recording paper entrance Stack of paper Correct Incorrect Note for recording paper: . Avoid using paper with a cotton and/or fiber content that is over 20%, such as letterhead paper or paper used for resumes. . Do not use different types or thicknesses of paper at the same time. This may cause a paper jam. . Avoid extremely smooth or shiny paper that is highly textured. . Avoid paper that is coated, damaged or wrinkled. Note: . Avoid double-sided printing. . Do not use paper printed from this unit for double-sided printing with other copiers or printers, or the paper may jam. . Some paper only accepts print on one side. Try using the other side of paper if you are not happy with the print quality. Adding paper 1. Pull the tension bar forward and hold open while removing all of the installed paper. 2. Add paper to the removed paper and straighten. 3. Fan the stack of paper. 4. Pull the tension bar forward and hold open while inserting the paper. Tension bar For fax advantage assistance, call 1-800-435-7329. Setup (Base Unit) Connections! 1 1 Connect the telephone line cord. 2 2 Connect the power cord. Caution: . When you operate this product, the power outlet should be near the product and easily accessible. Note: . For additional equipment protection, we recommend you use a surge protector. The following types are available: TELESPIKE BLOK MODEL TSB (TRIPPE MFG. CO.), SPIKE BLOK MODEL SK6-0 (TRIPPE MFG. CO.), SUPER MAX (PANAMAX) or MP1 (ITW LINX). The warranty does not cover damage due to power line surges or lightning. To a single telephone line jack (RJ11C) To a power outlet (120 V, 60 Hz) Telephone line cord Power cord Power surge protector ( ) Line surge protector ( ) To use the fax machine with a computer on the same line . We recommend you use separate wall jacks for the fax machine and the computer. . Set the fax machine to TEL mode (p. 52). . The device which has the shortest ring setting will answer the call first. . If the computer provides a port for telephone line, connect the fax machine to the port on the computer. For fax advantage assistance, call 1-800-435-7329. Setup (Base Unit) Date and time, your logo and facsimile telephone number! You should program the date and time, your logo and facsimile telephone number. This information will be printed on each page transmitted from your unit. Fax Correspondence Your logo Your facsimile telephone number Date and time FROM : Panasonic Fax Example: FAX NO. : 1234567 Feb. 26 2001 09:02AM P1 Setting the date and time 1 Press . Display: 2 Press or displayed. until the following is SYSTEM SET UP PRESS NAVI.[I H] SET DATE & TIME PRESS SET 6 Press . l The next feature will be displayed. 7 Press . YOUR LOGO PRESS SET MENU SET MENU 3 3 Press SET . Cursor Example: M:01/D:01/Y:01 TIME: 12:00AM 4 4 Enter the correct month/day/year by selecting 2 digits for each, using the dial keypad. Example: Aug. 10, 2001 Press 0 18 0 10 . M:08/D:10/Y:01 TIME: 12:00AM SET Display MENU STOP Note: 5 5 Enter the correct hour/minute by selecting 2 digits for each, using the dial keypad. Press to select “AM” or “PM”. Example: 3:15PM 1. Press 0 3 1 5 . M:08/D:10/Y:01 TIME: 03:15AM 2. Press until “PM” is displayed. M:08/D:10/Y:01 TIME: 03:15PM . You can enter the number by pressing or in steps 4 and 5. In this case, press to move the cursor. . The accuracy of the clock is approximately ±60 seconds a month. To correct a mistake l Press or to move the cursor to the incorrect number, and make the correction. l If you press while programming, the display will return to the previous one. STOP For fax advantage assistance, call 1-800-435-7329. Setup (Base Unit) Setting your logo The logo can be your company, division or name. MENU Press . Display: SYSTEM SET UP PRESS NAVI.[IH] 2 Press or until the following is displayed. (Hyphen) FLASH/CALL WAIT (Delete) SET Display STOP MUTE (Insert) MENU 4 4 Enter your logo, up to 30 characters, using the dial keypad. See the next page for details. Example: “Bill” 1. Press 2 2 times. Cursor LOGO=B 2. Press 4 6 times. LOGO=Bi 3. Press 5 6 times. LOGO=Bil 4. Press to move the cursor to the next space and press 5 6 times. LOGO=Bill 5 5 Press SET . l The next feature will be displayed. YOUR FAX NO. PRESS SET 6 6 Press MENU . Note: l You can enter your logo by pressing or (see the next page) in step 4. In this case, press to move the cursor. To correct a mistake l Press or to move the cursor to the incorrect character, and make the correction. To delete a character . Move the cursor to the character you want to delete and press (Delete). STOP To insert a character 1. Press or to move the cursor to the position to the right of where you want to insert the character. 2. Press (Insert) to insert a space and enter the character. MUTE 3 3 Press SET . YOUR LOGO PRESS SET LOGO= For fax advantage assistance, call 1-800-435-7329. Setup (Base Unit) To select characters with the dial keypad Pressing the dial keys will select a ch...