Assessments - 4, GPA: 4.8
(
)
)
|
Facilidade de uso
Battery and power source The camera cannot be operated even when it is turned on. • The battery is not inserted correctly. (P24) • The battery is exhausted. • Charge the battery. • AC adaptor is not connected properly. (P25) The LCD monitor turns off while the camera is turned on. • Is the display set to Viewfinder? > Press [LVF/LCD] button to switch to LCD monitor display. (P41) • Is [AUTO LCD OFF] (P33) of the [ECONOMY] mode active? > Press the shutter button halfway to cancel these modes. • Is the LCD monitor switched off? > Switch the display by pressing [DISPLAY]. (P61) • The battery is exhausted. • Charge the battery. The camera turns off immediately after it is turned on. • The battery is exhausted. • Charge the battery. • If you leave the camera on, the battery will be exhausted. > Turn the camera off frequently by using the [ECONOMY] mode etc. (P33) This unit is turned off automatically. • If you connect to a TV compatible with VIERA Link with a HDMI mini cable (optional) and turnoff the power on the TV with the remote control for the TV, the power on this unit also turns off. > If you are not using VIERA Link, set [VIERA Link] to [OFF]. (P37) The [CHARGE] lamp flashes. • Is the temperature of the battery excessively high or low? If it is, it will take longer than usual to charge the battery or charging may remain incomplete. • Are the terminals of the charger or battery dirty? > Wipe off the dirt using a dry cloth. VQT2A61 173 Others Recording The picture cannot be recorded. The shutter does not activate. • Is the mode dial correctly set? • Is the card inserted? • Is there any memory remaining on the card? > Delete the pictures which are not necessary to increase the available memory. (P59) • Is the subject focused? > At the time of purchase, the camera is set so that you cannot take a picture until the subject is brought into focus. If you want to be able to take a picture when you press the shutter button fully even if the subject is not focused, set [FOCUS PRIORITY] in the [CUSTOM MENU] menu to [OFF]. (P128) The recorded picture is whitish. • Picture might look whitish when lens or image sensor gets dirty with finger print or similar. > If the lens is dirty turn the camera off and then gently wipe the lens surface with a soft dry cloth. > Refer to P167 when the image sensor gets dirty. The recorded picture is too bright or dark. > Check that the exposure is correctly compensated. (P71) • Is the AE lock (P81) applied in inappropriate way? 2 or 3 pictures are taken at one time. > Unset the settings of White Balance Bracket (P85). The subject is not focused properly. • The subject is beyond the focus range of the camera. (P51) • There is camera shake (jitter) or the subject is moving slightly. (P53) • Is [FOCUS PRIORITY] in the [CUSTOM MENU] menu set to [OFF]? (P128) In this case, the picture may not be properly focused even if [AFS] or [AFC] in Focus Mode is set. • Is the AF lock (P81) applied in inappropriate way? The recorded picture is blurred. The Optical Image Stabilizer is not effective. • The shutter speed will become slower and the Optical Image Stabilizer function may not work properly when taking pictures especially in dark places. > We recommend holding the camera firmly with both hands when taking pictures. (P39) > We recommend using a tripod and the self-timer (P76) when taking pictures with a slow shutter speed. Taking pictures using White Balance Bracket is not possible. • Is the number of recordable pictures 2 or less? 174 VQT2A61 Others The recorded picture looks rough. Noise appears on the picture. • Is the ISO sensitivity high or the shutter speed slow? (ISO sensitivity is set to [AUTO] when the camera is shipped. Therefore, when taking pictures indoors etc. noise will appear.) > Decrease the ISO sensitivity. (P86) > Increase the setting for [NOISE RED.] in [FILM MODE] or lower the setting for each of the items other than [NOISE RED.]. (P88) > Take pictures in bright places. > Set the [LONG SHTR NR] to [ON]. (P123) The brightness or the hue of the recorded picture is different from the actual scene. • If recording under fluorescent light, the brightness or the hue may change slightly when the shutter speed becomes fast. This occurs due to the characteristics of fluorescent light. It is not a malfunction. Reddish horizontal streaks appear on the LCD monitor during recording. • This is characteristic of MOS sensors which serve as the camera’s pickup sensors. It appears when the subject has a bright part. Some unevenness may occur in the surrounding areas, but this is not a malfunction. It is recorded in motion pictures but is not recorded on still pictures. • It is recommended that you take pictures while taking care not to expose the screen to sunlight or any other source of strong light. Motion picture recording stops in the middle. • It is recommended to use a card with SD Speed Class. with “Class 6” or higher when recording motion pictures. . SD speed class is the speed stand...