Assessments - 4, GPA: 4
(
)
)
|
por este dispositivo também tem outras instruções :
Câmaras - DMCLC40 (1.48 mb)
Câmaras - DMCLC40 (1.75 mb)
Câmaras - DMCLC40 (3.36 mb)
Facilidade de uso
1. 2002 18 [In recording] 1 REC mode : AUTO (P29) : Program AE (P40) : Aperture-priority AE (P41) : Shutter-priority AE (P42) : Macro mode (P56) : Portrait mode (P43) : Landscape mode (P44) : Sports mode (P45) : Night portrait mode (P46) : Spot mode (P47) : Motion image mode (P31) 2 Flash mode (P34) : AUTO : AUTO/Red-eye reduction :Forced ON : Slow sync./Red-eye reduction :Forced OFF 3 :Spot AF (P55) 4 : Audio REC (P37) 5 Picture size (P38) :2240 a 1680 :1600 a 1200 :1120 a 840 : 640 a 480 6 Quality (data compression ratio) (P39) : Fine (low compression) : Standard (standard compression) : TIFF (incompression) 7 Battery indicator (P14) (When using AC adaptor this is not displayed) 8 Frame/Time remain In motion image mode: XXXS 9 ISO sensitivity (P54) No: AUTO 10 : Recording indication 11 White balance (P52) No: AUTO : Daylight : Cloudy : Halogen : Fluorescent : Flash : White set 12 Zoom (P32, P33) (digital zoom ON: ) 13 Self-timer mode (P36) : 2 seconds : 10 seconds 14 : Spot metering target (P47) 15 : Spot AF area (P47, P55) 16 : Focus area (P29) 17 Shutter speed indication (P42) 18 Aperture indication (P41) 19 Exposure compensation (P48) 20 Auto bracket (P49) : Auto (AE) bracket 21 Current date and time (P28) It is displayed for about 5 seconds when starting/after setting the REC mode/after setting the time. 22 : Focus indication (P29) 23 : Burst mode (P57) [In playback] 10:00 MAR. 1. 2002 24 : Playback mode 25 DPOF [ ] (P66) (White): DPOF setting for printing (Green): DPOF setting for Slide Show (Green with DPOF number): DPOF setting for printing and Slide Show 26 : Protected image (P69) 27 : Image with audio (P60) 28 Page/Total images 29 Picture size (P38) (Reference 5) 30 Quality (data compression ratio) (P39) (Reference 6) : In motion image mode 31 Battery indicator (P14) (Reference 7) 32 Folder/File number 33 REC data It will be displayed when the [DISPLAY] button is pressed. 34 Recorded date and time Quick Guide LOCKOPEN Prepare the following items. • Camera • Battery • Memory card • AC adaptor Check that the power switch is set to [OFF]. 1 Slide the lever in the direction of the arrow to open the battery door. 2 Insert the battery into the camera. (P13) 3 Connect the AC adaptor to the camera to charge the battery. (P14) 4 Insert the memory card into the camera. (P16) 5 Set the power switch to [ON]. (P18) 6 Set date/time. (P28) 7 Set the operational mode dial 2 2222 and the REC mode dial 1 1111 . (P25) • Set the operational mode dial to single mode [ ] or burst mode [ ]. 8 Slide the flash open lever to open the Flash. (P34) 9 Press the shutter button halfway to set the focus. (P24) 10 Press the shutter button fully to take a picture. (P24) [Playback] 11 Set the operational mode dial to playback [ ]. (P59) 12 Press 2/1 to select the picture you want to view. Inserting the Battery LOCKOPEN [Inserting] [Removing] 3 4 [Preparation] • Set the power switch to [OFF]. 1 Slide the lever in the direction of the arrow to open the battery door. 2 Insert the battery all the way in, until it is locked. 3 Close the battery door. 4 Slide the lever to lock the battery door. [Removing the battery] 1 Slide the lever in the direction of the arrow to open the battery door. 2 Press the lock 1 in the direction of the arrow to remove the battery. 3 Close the battery door. 4 Slide the lever to lock the battery door. • If you will not be using the camera for a long time, remove the battery. (When you insert the battery again, set the date) • Before removing the battery from the camera, set the power switch to [OFF]. • The battery supplied with this camera is exclusively designed for this camera. Do not use with any other equipment. CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. Charging theBattery 1 Set the power switch to [OFF]. 2 Insert the battery into the camera. (P13) 3 Open the terminal door. 4 Insert the connection plug of the AC adaptor into the DC IN socket of the camera. THE SOCKET OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE. 5 Plug the AC adaptor into the electrical outlet. • The green status indicator 1 blinks and charging starts. 6 When the status indicator stops blinking, charging is complete. • After charging is finished, remove the AC adaptor from the electrical outlet and then remove the connecting plug from the DC IN socket. . Battery indicator The remaining battery power is displayed on the LCD monitor. (This is not displayed when using AC adaptor) : The battery power is sufficient : The remaining power is a little low : The remaining power is low : Recharge or replace the battery . Charging time and available recording time (LCD on, shooting once every 30 seconds, flash every other shot. Measured using supplied 16 MB SD Memory Card) Supplied battery pack Approx. 120 min. In setting LCD monitor to ON Approx. 1...