Assessments - 4, GPA: 4.5
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
4) For more information about the image quality (compression ratio) setup, see page 47. Basic still image shooting – Using auto mode Holding the camera correctly When shooting pictures with the camera, be careful so that your fingers do not block the lens portion, finder window, flash emitter, or AF illuminator (pages 8, 9). 1 Mode dial , Set the mode dial to , and turn on the camera. • The lens cover opens when the power is turned on. • Do not touch the lens portion while it is operating, such as when you press POWER to turn on the power or when the zoom function is working (page 27). • You can create a new folder in the “Memory Stick” and select the folder for storing images (page 48). Shooting still images 2 , Hold the camera steadily with both hands and position a subject in the center of the focus frame. • The minimum focal distance to a subject is as follows: DSC-P93A: Approx 50 cm (19 3/4 inches) (W)/ 60 cm (23 5/8 inches) (T). DSC-P73: Approx 50 cm (19 3/4 inches) To shoot subjects at distances closer than this, use the macro mode (page 29). • The frame indicated on the LCD screen shows the focus adjustment range. (AF range finder, see page 49.) 3 VGA F2.0250 98 FINE 101 SAF AE/AF lock indicator Flashes in green tRemains on 3 VGA F2.0250 98 FINE 101 SAF AE/AF lock indicator Flashes in green tRemains on , Press and hold the shutter button halfway down. When the focus is achieved, the camera beeps. When the AE/AF lock indicator stops flashing and remains on, the camera is ready for shooting. (The LCD screen may be frozen for a split second depending on the subject.) • If you release your finger from the shutter button, shooting will be canceled. • When the camera does not beep, the AF adjustment is not complete. You can continue to shoot, but the focus is not set properly. 4 VGA 97 101 SAF , Press the shutter button fully down. The shutter clicks, the shooting is completed, and the still image is saved in the “Memory Stick.” When the recording lamp (page 9) goes out, you can shoot the next image. • When you are shooting with the batteries, if no tasks are performed for a while with the camera turned on, power is automatically shut off to preserve battery power (page 17). About Auto Focus When you try to shoot a subject that is hard to focus on, the AE/AF lock indicator will change to flashing slowly and the AE lock beep does not sound. The Auto Focus function may be difficult to use with in the following subjects. In such cases, release the shutter button, then try to recompose the shot and focus again. • The subject is distant from the camera and dark • The contrast between the subject and its background is poor • The subject is seen through glass, such as a window • A fast-moving subject • The subject has a reflection, such as that from a mirror, or there is a luminous body and a lustrous subject • A flashing subject • A backlit subject. There are two Auto Focus functions: “AF range finder frame” which sets the focus position according to the subject position and size, and “AF mode” which sets when the camera starts and stops focusing on. See page 49 for details. Checking the last image shot – Quick Review 10:30PM2005 1 1101-0008 8/8101 VGA Review RETURN , Press b (7) on the control button. To return to shooting mode, press the shutter button lightly or press b (7) on the control button again. To delete the image displayed on the LCD screen 1 Press (Delete). 2 Select [Delete] with v on the control button, then press z. The image is deleted. • The image may appear rough right after playback starts due to the image processing. Using the zoom feature 101 98 101 98 VGA VGA x1.1 x5.0S W (wide-angle) T (telephoto) , Press the zoom buttons to choose the desired zoom position, and shoot your image. The minimum focal distance to the subject DSC-P93A: Approx 50 cm (19 3/4 inches) (W)/60 cm (23 5/8 inches) (T) from the lens surface DSC-P73: Approx 50 cm (19 3/4 inches) (W/T) from the lens surface • The lens moves when the zoom feature is being used. Be very careful not to touch the lens. • You cannot change the zoom scaling while shooting movies (page 79). Zoom Your camera is equipped with zoom functions that enlarge the image using optical zoom and two types of digital processing. Digital zoom can be selected from smart zoom or precision digital zoom. When digital zoom is set, the zoom method switches from optical zoom to digital zoom when the zoom scale exceeds 3.. To use only the optical zoom, set [Digital Zoom] to [Off] in the SET UP settings (page 116). In this case, the digital zoom area does not appear in the zoom scale display bar on the LCD screen, and the maximum zoom is 3.. The enlargement method and the zoom scale differ according to the image size and the zoom type, so select the zoom to match the shooting purpose. When you press the zoom button, the zoom scaling indicator appears on the LCD screen as follows. Shooting still images The W side of this line is optical zoom area, and the T side is di...
Este manual também é adequado para os modelos :Câmaras - DSC-P93A (3.02 mb)