Assessments - 5, GPA: 4.2
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
However, the recording cannot be carried out while the % flash charge lamp (page 21) is flashing. (During this time, the camera is charging the flash.) RECORDING 20 Recording images with the finder You can extend the battery time by turning off the LCD screen and recording using the finder. Turn the finder adjustment dial until the image appears clearly within the finder, then record the image. ■ Indicators in the finder Recording lamp (red) AE/AF lock lamp (green) % Flash charge lamp (orange) Checking the last recorded image (Quick Review) You can check the last recorded image by clearing the menu from the screen (page 41) and pressing b (7) on the control button. To return to the normal recording mode: press lightly on the shutter button or press b (7) again. To delete the image: 1. Press MENU. 2. Select [DELETE] with ► on the control button, then press the center Z 3. Select [OK] with ▲ on the control button, then press the center Z 21 B Recording Using the zoom feature The lens portion moves during zoom operation. Be careful not to touch the lens portion while it is operating. Minimum focal distance to the subject W side: About 50 cm (19 3/4 inches) or more T side: About 50 cm (19 3/4 inches) or more To record even closer subjects, see page 61. Digital zoom function This camera has a digital zoom function. Digital zoom enlarges the image by digital processing and it starts to function when zoom exceeds 3X. The T side of the bar shows the digital zooming zone. Using digital zoom • The maximum zoom magnification is 6X. • Digital zooming deteriorates the picture quality. When digital zoom is not necessary, set [DIGITAL ZOOM] to [OFF] in the setup settings (page 80). Notes • Zoom does not work for moving images. • Use the LCD screen when using the digital zoom function. Digitally zoomed images do not appear in the finder. • The AF frame (page 99) does not appear on the LCD screen. 22 The indicators on the LCD screen Each time you press DSPL/LCD ON/OFF, the status of the LCD screen changes as follows: The LCD backlight is turned on. (All the available indicators are turned on.) The LCD backlight is turned on. (Warning messages and manual adjustment items which are set using thejog dial are turned on.) The LCD backlight is turned off. Notes • Because of the difference of the portion of the finder and the lens, use the LCD screen when you record a subject closer than 1 m (3 1/4 feet). • You cannot turn off the LCD screen when [DEMO] or [CONVERSION LENS] are set to [ON] in the SET UP settings. • You cannot turn off the LCD backlight in SET UP and when displaying the menu. • You cannot turn off the self-timer indicators and some of the indicators used in advanced operations. • The indicators on the LCD screen are not recorded. Using the self-timer When you use the self-timer function, the subject is recorded about 10 seconds after you press the shutter button. 23 B Recording Clear the menu (page 41), then press the control button V (0). The 0 (self-timer) indicator appears on the LCD screen, and about 10 seconds after you press the shutter button, the subject is recorded. The self-timer lamp flashes and the beep sounds after you press the shutter button until the shutter is released. To cancel the self-timer recording, press the control button V (0) again. Recording images with the flash The factory setting is auto (no indicator). In this mode, the flash automatically strobes when the surroundings is dark. To change the flash mode, clear the menu (page 41), then press the control button ▲ ( ^ ) repeatedly so that the flash mode indicator appears on the LCD screen. Each time you press the control button ▲ ( i), the indicator changes as follows. (No indicator) —t i —t ® —t (No indicator) ♦ Forced flash: The flash strobes regardless of the surrounding brightness. ® No flash: The flash does not strobe. You can change the brightness of the flash with [ i ±] (FLASH LEVEL) in the menu settings (page 45). To reduce the red-eye phenomenon Set [RED EYE REDUCTION] to [ON] in the setup settings, the flash strobes before recording to reduce the red-eye phenomenon (page 80). When [ON] is selected, O appears on the LCD screen. Notes • When [ISO] is set to [AUTO] in the menu settings, the recommended shooting distance using the built-in flash is 0.3 m to 3.0 m (11 7/8 inches to 9 feet 10 1/8 inches). When it is not set to [AUTO], the flash may be ineffective even if the flash level is changed. • Attaching a conversion lens (not supplied) may block the light from the flash or cause the lens shadow to appear. • You cannot use an external flash (not supplied) and the built-in flash at the same time. • Red-eye reduction may not produce the desired effects depending on individual differences, the distance to the subject, if the subject does not see the pre-strobe, or other conditions. • Red-eye reduction effects are also difficult to obtain if you set the shutter to a ...
Este manual também é adequado para os modelos :Câmaras - DSC-S85 (1.48 mb)