Assessments - 4, GPA: 4
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
• To view images on the CD-RW using a CD-ROM drive or CD-R drive, the drive must conform to the MultiRead type. • When using a CD-RW drive, you can use DirectCD in the same way you would be using a CD-R. Note You may not be able to use DirectCD depending on your CD-R drive or CD-RW drive. Installing DirectCD When connecting the camera to your computer using the USB cable, be sure to install the USB driver before connecting the USB cable. For details, refer to the operating instructions of the camera. E.g., for Windows Me users Follow these steps below to install DirectCD. English version illustrations are used in this manual. 1 Turn on your computer and insert the supplied CD-ROM (SPVD006) into the CD-ROM drive of your computer. The following window appears on the screen. Click here. If the window above is not displayed, start up “SETUP. EXE” in the CD-ROM. 2 Select the language. 3 Click [DirectCD]. The “Welcome” window appears on the screen. 4 Click [Next]. 5 Read the text on the window carefully, and if you accept it, click [Yes]. 6 Check the folder in which DirectCD will be installed. When you install DirectCD into another folder other than the default one, click [Browse...], and select the folder. 7 Click [Next]. The setup of the program starts. When the installation is complete, the screen returns to the window displayed in step 1. 8 Click [Exit]. The “Setup Complete” window appears on the screen. DirectCD will be available after you restart your computer. Check the option [Yes ...,] then click [Finish]. NoteonEasyCDCreator You cannot use Easy CD Creator with the camera connected to your computer with the USB cable. Using DirectCD You have to install the USB driver into your computer to connect the camera to your computer with the USB cable. Do not connect your camera to your computer before installing the USB driver. For details on the installation of the USB driver and on the directory, refer to the operating instructions of the camera. Note When you write new data onto the disc, before removing the disc from the camera, be sure to follow the procedure for removing the disc (page 12). If you remove the disc or disconnect the USB cable, without following the procedure, data on the disc may be broken. Starting DirectCD Do not initialize discs using DirectCD (this means that selecting [Format] from the DirectCD screen). Be sure to initialize discs using your camera. Initialization described in the operating instructions of the camera or selecting [Format] on the DirectCD screen is required for using a disc, however, these do not have compatibility each other. And “format” described in the operating instructions of the camera is to erase all the files in the CD-RW, and this is different from [Format] on the DirectCD screen. 1 After starting up your computer, insert a disc into the camera, and connect to your computer with the USB cable. to the USB connector USB cable to the USB jack Push the connector Computer as far as it will go 2 Turn on the camera and your computer. “DirectCD Disc Ready” appears on the screen. If this screen does not appear, double-click the CD icon on the Windows taskbar, in the lower corner of your screen. 3 Click [OK]. Writing data to a disc Once your disc is formatted as a DirectCD disc, you can write data to it in several different ways: • To drag and drop files from Windows Explorer onto the disc drive icon. • To select [Save As] from the File menu of a Windows application and select the driveletterofthe camera. • To use the [Send To] command. • To use MS-DOS command prompts from a DOS window in Windows. Notes • If the file name format of images does not correspond to the following format, DSC0ssss.JPG, you cannot play them back on the camera. For details, refer to the operating instructions of the camera. • Depending on the file type, the file may not be able to be played back on the camera. Removing the disc Note When you write new data onto the disc, before removing the disc from the camera, be sure to follow the procedure below. If you remove the disc or disconnect the USB cable, without following the procedure, data on the disc may be broken. When you open the file in the disc with your application software, quit it before starting the procedure below. When using a CD-R 1 Right-click the DirectCD icon on the taskbar and select [Eject] from the drop-down list box. The “Eject Disc” window appears. 2 Check the appropriate option. • If you do not execute the finalization, click the upper option on the window. • If you execute the finalization to view images on a CD-ROM drive, click the lower option on the window. When you will not add or modify data on the disc any more, also, check the “Protect disc so it cannot be written to again” option. 3 Check that the ACCESS lamp is not lit, then open the disc cover and remove the disc. When using a CD-RW When using a CD-RW 1 Right-click the DirectCD icon on the taskbar and select [Eject] from the drop-down list box. 2 Check that the AC...
Este manual também é adequado para os modelos :Câmaras - MVC-CD300 (677.18 kb)