Assessments - 3, GPA: 4.7
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
• When the focus preset distance is set (page 49), the AF illuminator does not function. • The AF range finder frame does not appear. The indicators flashes, and AF operates with priority on subjects located near the center. • The AF illuminator does not operate when SCN is set to (Twilight mode), (Landscape mode) or (Fireworks mode) in the menu settings. • The AF illuminator emits very bright light. Although there are no problems with safety, directly looking into the AF illuminator emitter at close range is not recommended. ON VGA 60min 101 96 ON FINE F2.830S AF Shooting images with the finder Finder Histogram on (Image information can also be displayed during playback.) r Indicators off VGA 101 96 S AF 60min The finder is convenient when you want to save battery power, or when it is difficult to confirm the image using the LCD screen. Each time you press , the display changes in the following order. S AF r LCD screen off r Indicators on • The image through the finder does not indicate the actual recordable range. This is due to parallax. To confirm the recordable range, use the LCD screen. • Just as with the AE/AF lock indicator on the LCD screen, when the AE/AF lock lamp of the finder section stops flashing and remains on, you can start shooting (page 23). • When the LCD screen is turned off: – The digital zoom does not function (page 25). – [AF Mode] is set to [Single] (page 48). – If you press (Flash mode)/ (Self-timer)/ (Macro), the image will be displayed on the LCD screen for approximately two seconds so you can check or change the setting. • When shooting/viewing movies, the status of the LCD screen changes as follows: Indicators off t LCD screen off t Indicators on • For a detailed description of the indicators, see page 120. • For a detailed description of the histogram, see page 54. • This setting is maintained even when the power is turned off. VGA 101 96 S AF 60min Inserting the date and time on a still image , Set the mode dial to SET UP. The SET UP screen appears. • The date and time is not inserted in Multi Burst mode. • When images are shot with the date and time superimposed, the date and time cannot be removed later. • The date and time do not appear on the LCD screen during shooting, instead, indicator appears on the LCD screen. The actual date and time appear in red on the lower-right corner during playback only. Shooting still images 1 SELECT Camera AF Mode: Digital Zoom: Date/Time: Red Eye Reduction: AF Illuminator: Auto Review: Single Smart Off Off Auto Off 2 Day&Time Date Off Camera AF Mode: Digital Zoom: Date/Time: Red Eye Reduction: AF Illuminator: Auto Review: 3 PAGE SELECT Camera AF Mode: Digital Zoom: Date/Time: Red Eye Reduction: AF Illuminator: Auto Review: Single Smart Day&Time Off Auto Off 2 1 2 1 2 1 , Select (Camera) with v on the control button, then press B. Select [Date/Time] with v/V, then press B. , Select the date and time setting with v/V on the control button, then press z. Day&Time: Superimposes the date, hour, and minute onto the image. Date: Superimposes the year, month and day onto the image. Off: Does not superimpose the date and time onto the image. After the setting has been completed, set the mode dial to , and shoot the image. • You can also shoot with the mode dial set to P, M or SCN. • If you select [Date], the date is superimposed onto the image in the order selected in “Setting the date and time” (page 16). • This setting is maintained even when the power is turned off. Shooting according to scene conditions — Scene Selection Twilight portrait mode table for shooting portraits in dark ces. Allows you to shoot sharp images of ople in dark places without losing the rk atmosphere of the surroundings. The tter speed becomes slower, so using a od is recommended. Landscape mode Focuses only on a distant subject to shoot landscapes, etc. Soft snap mode This mode lets you shoot skin colors in brighter and warmer tones for more beautiful pictures. In addition, the soft focus effect creates a gentle atmosphere for portraits of people, flowers, etc. Snow mode When shooting snowy scenes or other places where the whole screen appears white, use this mode to prevent sunken colors and record clear images. When shooting seaside or lakeside scenes, the blue of the water is clearly recorded. High-speed shutter mode Use this mode to shoot moving subjects outdoors or in other bright places. • The shutter speed becomes faster, so images shot in dark places become darker. Fireworks mode You can record fireworks in all their splendor. The focus distance is set to infinity and the shutter speed becomes slower, so using a tripod is recommended. Candle mode You can record parties, candle services and other candlelit scenes without spoiling the candlelight atmosphere. The shutter speed becomes slower, so using a tripod is recommended. Shooting still images • You can change the shutter speed by setting an EV adjustment value (page 53). , Set the mode dial to SCN, then press ME...
Este manual também é adequado para os modelos :Câmaras - DSC-P120 (2.71 mb)