Assessments - 4, GPA: 4.5
(
)
)
|
Facilidade de uso
It could lead to overheating, burns and other injuries. Use the supplied terminal cover to transport or store the battery pack. • Before you discard a battery, cover the terminals with tape or other insulators to prevent direct contact with other objects. Contact with the metallic components of other materials in waste containers may lead to fire or explosions. Discard the batteries in specialized waste facilities if available in your area. • Use only recommended batteries and accessories. Use of batteries not expressly recommended for this equipment may cause explosions or leaks, resulting in fire, injury and damage to the surroundings. • Disconnect the compact power adapter from both the camera and power outlet after recharging and when the camera is not in use to avoid fires and other hazards. Continuous use over a long period of time may cause the unit to overheat and distort, resulting in fire. • The camera terminal of the supplied compact power cord is designed for exclusive use with your camera. Do not use it with other products or batteries. There is a risk of fire and other hazards. • Exercise due caution when screwing on the separately sold wide converter lens, tele-converter lens, close-up lens and conversion lens adapter. If they loosen, fall off and shatter, the glass shards may cause an injury. Never aim the lenses at the sun or strong light sources. There is a risk of damage to eyesight. Cautions • Avoid using, placing or storing the equipment in places subject to strong sunlight or high temperatures, such as the dashboard or trunk (boot) of a car. Exposure to intense sunlight and heat may cause the batteries to leak, overheat or explode, resulting in fire, burns or other injuries. High temperatures may also cause deformation of the casing. Ensure that there is good ventilation when using the compact power adapter to charge the battery pack or power the camera. • Do not store the equipment in humid or dusty areas. Storage in such areas could lead to fire, electrical shock or other damage. • Be careful not to bang the camera or subject it to strong impacts or shocks that could lead to injury or damage the equipment when wearing or holding it by the strap. • Be careful not to cover the flash with your fingers when shooting. In addition, do not touch the surface of the flash after taking several pictures in rapid succession. Either action could result in burns. • Do not operate the flash with dirt, dust or other items stuck to its lens. The resulting heat build-up could damage the flash. • If your camera is used for prolonged periods, the camera body may become warm. Please take care when operating the camera for an extended period as your hands may experience a burning sensation. Preventing Malfunctions ¦ Avoid Strong Magnetic Fields Never place the camera in close proximity to electric motors or other equipment generating strong electromagnetic fields. Exposure to strong magnetic fields may cause malfunctions or corrupt image data. ¦ Avoid Condensation Related Problems Moving the equipment rapidly between hot and cold temperatures may cause condensation (water droplets) to form on its external and internal surfaces. You can avoid this by placing the equipment in an airtight, resealable plastic bag and letting it adjust to temperature changes slowly before removing it from the bag. ¦ If Condensation Forms Inside the Camera Stop using the camera immediately if you detect condensation. Continued use may damage the equipment. Remove the CF card, and battery or a household power source, from the camera and wait until the moisture evaporates completely before resuming use. Quick Start Quick Start 1Battery lock Install the Battery (p. 19). Open the battery cover and insert the battery while pressing the battery lock. Indicator To power outlet Charge the Battery (p. 16). Check that the power is off. Charge the battery. The battery is approximately 90% charged (adequate charge for use) when the orange indicator beside the viewfinder stops blinking and lights steadily. After charging, detach the compact power adapter’s DC plug from the camera. 3Install the CF card (p. 22). Push the card in until the CF card eject button fully extends. 4Remove the lens cap. 5Turn the power on (p. 28). Open the LCD monitor and turn the mode lever to (shooting) while pressing the release button. The Power/Mode indicator lights orange. CF Card Eject Button Power/Mode Release Button Indicator Turn the mode dial to (p. 51). 7 Focus (p. 39). Aim the camera and lightly press the shutter button halfway. Two beeps will sound when the autofocus is set. 8 Shoot (p. 39). Press the shutter button all the way. You will hear the sound of the shutter close when the shot is complete. View the recorded image (p. 53). The recorded image will display in the LCD monitor for approximately 2 seconds. Keep your finger on the shutter button or press the button while the image is displayed to continue to display the image after the shutter button...