Assessments - 5, GPA: 3.8
(
)
)
|
Facilidade de uso
: Return to single image replay (Pressing the Menu button also returns to single image replay.) :Play : First Frame : Previous Frame (Rewinds if the SET button is held down) : Next Frame (Fast Forwards if the SET button is held down) : Last Frame : Switch to Movie Editing Mode (p. 100) Replaying Use the television’s controls to adjust the volume when playing a movie on a TV set (p. 146). • You may experience frame dropping and audio breakup when replaying a movie on a computer with insufficient system resources. • Movies shot with other cameras may not replay on this camera. See List of Messages (p. 162). 99 Editing Movies Selecting (Edit) in the movie control panel enables you to cut unwanted portions at the start or end of a movie clip. Protected movies and movies less than 1 second in duration cannot be edited. 2 Use the 3 Use the 4 Use the 1 Switch to the movie editing mode. •See Operating the movie control panel (p. 99). • The movie editing panel and the movie editing bar will display. button to select or and the button to set the portion to which the cut is applied. : Cut Beginning : Cut End : Cursor button to select (Play) and press the SET button. • A preview of the temporarily edited movie clip plays. • To stop it, press the SET button again. button to select (Save) and press the SET button. Selecting cancels the edits and returns to the movie control panel display. 5 Use the button to select [New File] or [Overwrite] and press the SET button. • [New File] saves the edited movie under a new file name. The pre-edit data is left unchanged. • [Overwrite] saves the edited movie with its original file name. The pre-edit data is lost. • When the SD card lacks sufficient space to create a new file, only [Overwrite] can be selected. A small . symbol will appear in the time display on the movie in that case. • The minimum duration of an edited movie is 1 second. • It may take approximately 3 minutes to save an edited movie. If the battery pack runs out of charge partway through, edited movie clips cannot be saved. When editing movies, use a fully charged battery pack or the separately sold AC Adapter Kit ACK900 (p. 166). Replaying 101 Rotating Images in the Display Images can be rotated clockwise 90° or 270° in the display. 0° (Original) 90° 270° (Play) menu, select and press the SET button. See Selecting Menus and Settings (p. 44). button to select the image to be rotated and press the SET button. Cycle through the 90°/270°/0° orientations with each press of the SET button. 1 In the 2 Use the 3 Press the MENU button. The display will return to the Play menu. Pressing the MENU button again returns to the Replay screen. • Movies cannot be rotated. • When images are downloaded to a computer, the orientation of images rotated by the camera will depend upon the software used to download the images. • Images can be magnified when rotated (p. 94). • Images taken vertically with Auto Image Rotate (p. 90) set to [On] will automatically be rotated to the vertical position when viewed on the camera’s LCD monitor. Replaying 103 Attaching Sound Memos to Images In replay mode (including single image replay, index replay, and magnifying replay), you can attach sound memos (up to 60 seconds) to an image. The sound data is saved in WAVE format. 1 In the 2 Use the 3 Use the (Play) menu, select and press the SET button. See Selecting Menus and Settings (p. 44). button to select an image and press the SET button. The sound memo control panel will display. button to select and press the SET button. • The recording starts and the elapsed time is displayed. Speak towards the microphone of the camera. • Press the SET button again to stop recording. To resume recording, press the SET button again. • Up to 60 seconds of recordings may be added to any one image. • To return to the previous screen, select and press the SET button. Exiting the Sound Memos Press the MENU button. Playing/Erasing Sound Memos 2 Use the1 Display an image with a sound memo attached (p. 104) and press the SET button. • Images with sound memos attached have a symbol displayed on them in the LCD monitor. • The sound memo control panel will display. button to select or and press the SET button. (Play) • The sound memo will play. Playback will stop when you press the SET button. Press the SET button again to resume playback. • Use the button to adjust the sound volume. (Erase) • A confirmation menu will display. Use the button to select [Erase] and press the SET button. To return the playback to the beginning, select (Stop) while stopped and press the SET button. Replaying 105 • You cannot attach sound memos to movies. • The “Memory card full” message will display when the SD card is full and you will be unable to record sound memos to that card. • If an incompatible sound memo is attached to an image, you will be unable to record or play sound memos for that image, and the “Incompatible WAVE format” message will display. You can erase incompatible sound data us...