Assessments - 2, GPA: 5
(
)
)
|
Facilidade de uso
• The Auto Power Off (page 146) trigger time is fixed at five minutes while the camera is in Auto Shutter standby. Sleep (page 145) is disabled while Auto Shutter being used. • To cancel Auto Shutter recording while Auto Shutter is being performed (indicated by “0 Auto” flashing on the monitor screen), press [SET]. • The “E Tracking” setting for the AF area cannot be used while Detect Blur or Detect Panning is selected for the Auto Shutter setting (page 40). Advanced Settings 71 • Always make sure you had “U Spot” selected for the AF area whenever you are using the Detect Smile Auto Shutter setting (page 40). • Auto Shutter cannot be used in combination with any of the following features. – Premium Auto – Some BEST SHOT scenes • The following function is disabled when shooting with Auto Shutter. – Triple Self-timer ProcedureShooting with Face Detection (Face Detection) [r] (REC) * [MENU] * REC Tab * Face Detection For details, see the Control Panel procedure on page 44. ProcedureShooting with Continuous Auto Focus (Continuous AF) [r] (REC) * [MENU] * REC Tab * Continuous AF When shooting a snapshot while “On” is selected for Continuous AF, Auto Focus is performed and focusing is continually updated until you half-press the shutter button. • Before you half-press the shutter button, the camera focuses at the center of the screen. If “Face Detection” is turned on when you half-press the shutter button, focusing is performed in the area where a face is detected. • Shooting with Continuous AF can cause vibration and noise to occur due to lens operation. This does not indicate malfunction. Advanced Settings 72 Reducing the Effects of Camera and Subject Movement (Anti Shake) Procedure [r] (REC) * [MENU] * REC Tab * Anti Shake You can turn on the camera’s Anti Shake feature to reduce image blur due to subject movement or camera movement when shooting a moving subject using telephoto, when shooting a fast-moving subject, or when shooting under dim lighting conditions. Your digital camera is equipped with a CCD shift type camera shake correction feature and a high-sensitivity anti image blur feature. These two features work in concert to minimize the effects of hand and subject movement. NOTE Auto Camera AS Image AS DEMO Off D A S F Minimizes the effects of hand and subject movement. Minimizes the effects of camera movement onlyMinimizes the effects of subject movement onlyHalf-pressing the shutter button demonstrates the effect of “A Camera AS”. However, the image is not recorded. Turns off Anti Shake settings • Only Camera Stabilizer can be used during movie recording. • ISO sensitivity, aperture, and shutter speed do not appear on the monitor screen when you half-press the shutter button while “D Auto” or “S Image AS” is selected. These values will appear briefly, however, in the preview image that is displayed immediately after you shoot a snapshot. • The ISO sensitivity setting (page 42) must be “AUTO” for “S Image AS” to work. • Shooting while “D Auto” or “S Image AS” is selected can cause an image to appear somewhat coarser than normal and can cause slight deterioration of image resolution. • Anti Shake may not be able to eliminate the effects of camera or subject movement when movement is severe. •“A Camera AS” may not work properly when the camera is mounted on a tripod. Either turn off Anti Shake or select “S Image AS”. Advanced Settings 73 ProcedureSpecifying the Auto Focus Area (AF Area) ProcedureSpecifying the Auto Focus Area (AF Area) [r] (REC) * [MENU] * REC Tab * AF Area For details, see the Control Panel procedure on page 40. ProcedureUsing the Auto Focus Assist Light (AF Assist Light) [r] (REC) * [MENU] * REC Tab * AF Assist Light Half-pressing the shutter button while this setting is selected Front lamp causes the front lamp to light, which provides illumination for focusing in areas where lighting is dim. Leaving this function turned off is recommended when shooting portraits from short distances, etc. IMPORTANT! • Never look directly into the front lamp while it is lit. Advanced Settings 74 ProcedureChanging the Focus Frame Shape (Focus Frame) ProcedureChanging the Focus Frame Shape (Focus Frame) [r] (REC) * [MENU] * REC Tab * Focus Frame You can use this procedure to select from among five different shapes, including a heart shape, for the focus frame. Settings . . ™ ¬ . Random NOTE • Half-pressing the shutter button will cause the focus frame to change one of the shapes shown below. Focus successful Focus not successful • While “Random” is selected, one of the four focus frames is selected randomly whenever the camera is turned on. • When shooting with face detection, the frame shape is .. • On-screen grid will not appear when “E Multi” is selected as the AF area (page 40) while any focus frame other than . is selected with this setting. ProcedureTurning Digital Zoom On or Off (Digital Zoom) [r] (REC) * [MENU] * REC Tab * Digital Zoom You can use this setting to turn digital zoom on or off. Wh...