Assessments - 4, GPA: 4.3
(
)
)
|
Facilidade de uso
• The background you shoot in step 9 of the above procedure is not saved. Only the cropped subject image is saved. Extracting Text from an Image You can write text on a blank sheet of paper, shoot an image of it, and then extract the text for insertion into an image. 1. On the BEST SHOT scene menu, select the “Dynamic Photo” scene (page 55). 2. Press [SET], use [8] and [2] to select the third Control Panel option from the bottom (Select Subject Type), and then press [SET] (page 33). 3. Use [8] and [2] to select “Number of Shots”, and then press [SET]. 4. Use [8] and [2] to select “Text” and then press [SET]. 5. Press the shutter button to shoot what is written on the paper. IMPORTANT! • When shooting text, take care to make sure that only the paper it is written on completely fills the screen. Do not allow the edges of the paper to be included in the text image. Dynamic Photo 104 Inserting a Subject into a Snapshot or Movie (Dynamic Photo) Inserting a Subject into a Snapshot or Movie (Dynamic Photo) Use the following procedure to insert a subject image into a snapshot or movie. 1. In the PLAY mode, press [SET]. 2. Use [8] and [2] to select the second PLAY Panel item from the bottom (Dynamic Photo) and then press [SET] (page 90). 3. Use [4] and [6] to select the background image you want and then press [SET]. • Only an image that satisfies the following conditions can be used as a background image. – A snapshot or movie recorded with this camera or a snapshot transferred to this camera’s memory using Photo Transport (page 122) – A snapshot with an aspect ratio of 4:3 4. Use [4] and [6] to select the subject image you want to insert and then press [SET]. 5. If you are inserting a subject into a movie an image will appear on the monitor screen showing the approximate location of the subject in the movie. Use [4] and [6] to shift Insert location the location to the position you want. After you are finished, press [SET]. • If you insert a subject into a movie, the resulting movie will be a maximum of 20 seconds long. Everything before and after the insertion is cut off. If the movie you are inserting into (original movie) is shorter than 20 seconds, the resulting movie will be the same length as the original movie. • If you are inserting a subject into a snapshot, skip directly to step 6. 6. Use the zoom controller to adjust the size of the subject and use [8], [2], [4], and [6] to adjust its position. 7. When everything is the way you want, press [SET]. This inserts the subject into another image and creates a Dynamic Photo. • Inserting an animated subject into a snapshot will save a Dynamic Photo that consists of 20 still images of 2M size or smaller. • Inserting a stationary subject into a snapshot will save a single still image of 6M size or smaller. • Inserting a subject into a movie will save the Dynamic Photo as a movie file. Dynamic Photo 105 NOTE • The camera comes with a number of extracted sample subjects in its built-in memory, which you can use to create Dynamic Photos, if you like. • Performing a delete or format operation will not delete the extracted sample subjects in built-in camera memory. • You can copy the sample subjects to a memory card using the “Built-in * Card” copy operation (page 100). To view a Dynamic Photo (Dynamic Photo File) 1. Press [p] (PLAY) and then use [4] and [6] to display the Dynamic Photo you want to view. 2. If you want to see the subject in the Dynamic Photo move, press [0] (Movie). The Dynamic Photo is repeated as a continuous loop. • Movement of the subject also will start automatically about two seconds after you display a Dynamic Photo. Dynamic Photo 106 Converting a Dynamic Photo Still Image to a Movie (Movie Converter) Converting a Dynamic Photo Still Image to a Movie (Movie Converter) A Dynamic Photo with a still image background and a moving subject is stored as a series of 20 still images. You can use the following procedure to convert the 20 images that make up a Dynamic Photo to a movie. 1. Press [p] (PLAY) and then use [4] and [6] to display the Dynamic Photo you want to convert. 2. Press [SET], use [8] and [2] to select the bottom PLAY Panel item (MENU), and then press [SET] (page 90). 3. Use [4] and [6] to select the “PLAY” tab. 4. Use [8] and [2] to select “Movie Converter” and then press [SET]. • The final movie format is Motion JPEG. • The final movie image size is 640x480 pixels. IMPORTANT! • Following conversion, the movie will be played back three times. Dynamic Photo 107 108 Printing Printing • You can specify which images you want to print, the number of copies, and date stamp settings before printing (page 111). Printing Snapshots Professional Print Service You can take a memory card that contains the images you want to print to a professional print service and have them printed. Printing on a Home Printer Printing Images on a Printer with Memory Card Slot You can use a printer equipped with a memory card slot to print images directly from a memo...