Assessments - 3, GPA: 4.7
(
)
)
|
Facilidade de uso
3. Use [..] and [..] to select the snapshot whose display image you want to rotate. 4. Use [..] and [..] to select “Rotate” and then press [SET]. • Each press of [SET] will rotate the displayed image 90 degrees left. 5. When the displayed image is at the orientation you want, press [MENU]. EDITING IMAGES 165 IMPORTANT! • You cannot rotate an image that is protected. To rotate a protected snapshot, first remove its protection (page 180). • You may not be able to rotate an image recorded with another camera. • The following images cannot be rotated. – The voice recording file icon – Images created with MOTION PRINT – Zoomed images • The original (unrotated) version of a snapshot’s image will be displayed on the 12-image screen and the calendar screen. • Movies can be rotated on the camera’s monitor screen only. The movie is not rotated when played on a computer screen. Editing a Movie on the Camera You can perform the following cut operations on the camera to edit movies you have recorded. Operation Description Cut (To-Point Cut) Cuts everything from the current location to the beginning of the movie. Cut (Point-To-Point Cut) Cuts everything between two points. Cut (From-Point Cut) Cuts everything from the current location to the end of the movie. EDITING IMAGES 166 IMPORTANT! • When you edit a movie, only the result is saved. The original movie is not retained. Once you perform an editing operation, you will not be able to undo it. • A movie that is shorter than five seconds cannot be edited. • The movie editing operation is supported only for movies that were recorded with this camera. • You will not be able to edit a movie if the amount of remaining memory capacity is less than the size of the movie file you want to edit. If there is not enough memory available, delete any files you no longer need to free up more. • Cutting a movie into two parts or splicing of two movies in to a single movies cannot be performed on the camera. ¦ Editing with To-Point Cut or From-Point Cut 1. Play back the movie you want to edit. 2. Press [SET] to pause playback. • Check to make sure that “ ” (cut icon) is displayed on the monitor screen. If it isn’t, press [SET] again. 3. Press [..]. • You could also perform the following steps in place of steps 1 through 3 above. 1 In the PLAY mode, select the movie you want to edit and then press [MENU]. 2 On the “PLAY” tab, select “Movie Editing” and then press [..]. Cut icon EDITING IMAGES 167 4. Use [..] and [..] to select “ Cut” (To- Point Cut) or “ Cut” (From-Point Cut) and then press [SET]. • To cancel movie editing, select “Cancel” and then press [SET]. This will return to the paused movie playback screen. 5. Use the following operations to select the frame (point) from which or to which you want to cut the movie (the cut point). To do this: Press this button: Fast forward or fast reverse playback [..] or [..] Pause or unpause movie playback [SET] Scroll paused playback one frame forward or back [..] or [..] • The part of the movie indicated in red on the displayed indicator bar is the part that will be cut. • To cancel the cut operation, press [MENU]. This will return to the screen in step 3. 6. When the frame where you want the cut point to be is displayed, press [..]. EDITING IMAGES 168 7. In response to the confirmation message that appears, use [..] and [..] to select “Yes” and then press [SET]. • To cancel movie editing, select “No” instead of “Yes” and then press [SET]. This will return to the paused movie playback screen. • The selected cut operation will take considerable time to complete. Wait until the “Busy... Please wait...” message disappears from the monitor screen before performing any operation on the camera. Note that a cut operation can take a very long time if the movie being edited is long. ¦ Using Point-To-Point Cut 1. Play back the movie you want to edit. 2. Press [SET] to pause playback. Cut icon 3. Press [..]. • You could also perform the following steps in place of steps 1 through 3 above. 1 In the PLAY mode, select the movie you want to edit and then press [MENU]. 2 On the “PLAY” tab select “Movie Editing” and then press [..]. EDITING IMAGES 169 4. Use [..] and [..] to select “ Cut” (Point-To-Point Cut) and then press [SET]. • To cancel movie editing, select “Cancel” and then press [SET]. This will return to the paused movie playback screen. 5. Use the following operations to select the frames (points) between which you want to cut the movie (the cut points). To do this: Press this button: Fast forward or fast reverse playback [..] or [..] Pause or unpause movie playback [SET] Scroll paused playback one frame forward or back [..] or [..] • To cancel the cut editing operation, press [MENU]. This will return to the screen in step 3. 6. When the frame where you want the first (From) cut point to be is displayed, press [..]. 7. Repeat step 5 to select the frame you want to use as the second (To) cut point. • The part of the movie indicated in red on the dis...