Assessments - 2, GPA: 3.5
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
USB DISP MENU SET REC PLAY PHOTO CHARGE USB • Also, connect the AC adaptor to the USB cradle and plug the AC adaptor into an electrical outlet. 3. Set the camera on the USB cradle. 4. Turn on the printer. 5. Load paper for printing the images into the printer. Using USB DIRECT-PRINT Your camera supports USB DIRECT-PRINT, which was developed by Seiko Epson Corporation. When connected directly to a printer that supports USB DIRECT-PRINT, you can select images to be printed and start the print operation directly from the camera. DPOF settings (page 98) are used to determine which images and how many copies should be printed. FILE MANAGEMENT 6. Press the USB cradle [USB] button. • This displays the print menu on the camera’s monitor screen. 7. On the camera’s monitor screen, select “Print”, and then press [SET]. • This automatically starts printing of the images you specified with the DPOF procedure. • If you want to print the same batch of images again, press the [USB] button on the USB cradle. • A message appears on the monitor screen, followed by the DPOF setting screen (page 98), if there are no DPOF settings currently configured on the camera to control the printing operation. If this happens, configure the required DPOF settings and then perform step 6 of the above procedure again. • If you want to change the current DPOF settings, select “DPOF” on the print menu to display the DPOF setting screen (page 98). 8. After printing is complete, turn off the camera and remove it from the USB cradle. IMPORTANT! • See the documentation that comes with your printer for information about print quality and paper settings. • Contact your printer manufacturer for information about models that support USB DIRECT-PRINT, upgrades, etc. • Never disconnect the USB cable, or perform any camera or USB cradle operation while printing is in progress. Doing so causes a printer error. • To interrupt an ongoing print operation, perform the required operation on the printer. 103 FILE MANAGEMENT Using the FAVORITE Folder You can copy scenery shots, photos of your family, or other special images from a file storage folder (page 136) to the FAVORITE folder in built-in memory (page 136). Images in the FAVORITE folder are not displayed during normal playback, so it helps to keep your personal image private as you carry them around. FAVORITE folder images are not deleted when you change memory cards, so you can always keep them on hand. To copy a file to the FAVORITE folder 1. In the PLAY mode, press [MENU]. 2. Select the “PLAY” tab, select “Favorites”, and then press []. 3. Use [] and [] to select “Save”, and then press [SET]. • This displays the names of the files in built-in memory or on the loaded memory card. 4. Use [] and [] to select the file you want to copy to the FAVORITE folder. 5. Use [] and [] to select “Save”, and then press [SET]. • This copies the displayed file to the FAVORITE folder. 6. After copying all of the files you want, use [] and [] to select “Cancel”, and then press [SET] to exit. 104 FILE MANAGEMENT NOTES • Copying an image file with the above procedure creates a 320 x 240-pixel QVGA-size image in the FAVORITE folder. • A file copied into the FAVORITE folder is automatically assigned a file name that is a serial number (0001 to 9999). To display a file in the FAVORITE folder 1. In the PLAY mode, press [MENU]. 2. Select the “PLAY” tab, select “Favorites”, and then press []. 3. Use [] and [] to select “Show”, and then press [SET]. • If the FAVORITE folder is empty, the message “No Favorites file!” appears. 4. Use [] (forward) and File Name [] (back) to scroll through the files in the FAVORITE folder. 5. After you are finished viewing files, press [MENU] twice to exit. 105 FILE MANAGEMENT NOTE • Holding down [] or [] scrolls images at high speed. IMPORTANT! • Note that a FAVORITE folder is created in the camera’s built-in memory only. No FAVORITE folder is created on a memory card when you use one. If you want to view the contents of the FAVORITE folder on your computer screen, you need to remove the memory card from the camera (if you are using one) before placing the camera onto the USB cradle to start data communication (pages 124, 136). To delete a file from the FAVORITE folder 1. In the PLAY mode, press [MENU]. 2. Select the “PLAY” tab, select “Favorites”, and then press []. 3. Use [] and [] to select “Delete”, and then press [SET]. 4. Use [] and [] to select the file you want to delete from the FAVORITE folder. 5. Use [] and [] to select “Delete”, and then press [SET]. • This deletes the file from the FAVORITE folder. 6. After deleting all of the files you want, use [] and [] to select “Cancel”, and then press [SET] to exit. 106 FILE MANAGEMENT IMPORTANT! • You cannot use the delete operations on page 94 to delete images from the FAVORITE folder. Performing the memory format operation (page 117), however, does delete FAVORITE folder files. 107 OTHER SETTINGS Specifying the File Name Serial Number Generation...