Assessments - 3, GPA: 4
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
• You also can use a PC card adapter or a memory card reader/writer to access camera files directly from the camera’s memory card. Using the Camera with a Computer 95 Other Settings (Set Up) This section explains menu items that you can use to configure settings and perform other operations in both the REC mode and PLAY mode. For information about menu operations, see page 46. Selecting a REC Mode Screen Layout (R Panel) Procedure [MENU] * Set Up Tab * R Panel The REC mode screen layout settings let you select the layout of icons. On Displays the Control Panel. The Control Panel makes it quick and easy to change certain camera settings. Off Turns off Control Panel display. This setting helps to view more of the image when the 16:9 aspect ratio is selected. Certain camera settings are indicated by icons on the image. • All screen shots in this manual show what appears when the Control Panel is turned on. Other Settings (Set Up) 96 Selecting a PLAY Mode Screen Layout (P Display) Selecting a PLAY Mode Screen Layout (P Display) Procedure [MENU] * Set Up Tab * P Display The PLAY mode screen layout settings let you select how display images are shown on the monitor screen. Wide With this setting, the display image is the maximum possible size that allows the entire image to be displayed horizontally. With some aspect ratios, the top and bottom of the image will be cut off. 4:3 100% of the display image is always visible. With some aspect ratios, black bands may appear above and below, or to the left and right of the image. Configuring Camera Sound Settings (Sounds) Procedure [MENU] * Set Up Tab * Sounds Startup Specifies the startup sound Sound 1 - 5: Built-in sounds (1 through 5) Off: Sound off Half Shutter Shutter Operation Operation ( )= Specifies the sound volume. This setting is also used as the audio level during video output (page 63). Play ( )= Specifies the volume of movie and Audio Snapshot audio output. This volume setting is not used during video output (from the USB/AV port). • Setting a volume level of 0 mutes output. Other Settings (Set Up) 97 Specifying the File Name Serial Number Generation Rule (File No.) Specifying the File Name Serial Number Generation Rule (File No.) Procedure [MENU] * Set Up Tab * File No. Use the following procedure to specify the rule that governs generation of the serial number used in file names (page 93). Continue Tells the camera to remember the last used file number. A new file will be named using the next sequential number, even if files are deleted or if a blank memory card is loaded. If a memory card is loaded and that card already has files stored on it and the largest sequential number in the existing file names is greater than the largest sequential number remembered by the camera, numbering of new files will start from the largest sequential number in the existing file names plus 1. Reset Restarts the serial number from 0001 whenever all files are deleted or when the memory card is replaced with a blank one. If a memory card is loaded and that card already has files stored on it, numbering of new files will start from the largest sequential number in the existing file names number plus 1. Other Settings (Set Up) 98 Configuring World Time Settings (World Time) Configuring World Time Settings (World Time) Procedure [MENU] * Set Up Tab * World Time You can use the World Time screen to view the current time in a zone that is different from your Home City when you go on a trip, etc. World Time displays the current time in 162 cities in 32 time zones around the globe. 1. Use [8] and [2] to select “World” and then press [6]. • To change the geographic area and city for the time where you normally use the camera, select “Home”. 2. Use [8] and [2] to select “City” and then press [6]. • To change the “World” setting to summer time, use [8] and [2] to select “DST” and then select “On”. Summer time is used in some geographical areas to advance the current time setting by one hour during the summer months. 3. Use [8], [2], [4], and [6] to select the geographic area you want and then press [SET]. 4. Use [8] and [2] to select the city you want and then press [SET]. 5. Press [SET]. Time Stamping Snapshots (Timestamp) Procedure [MENU] * Set Up Tab * Timestamp You can configure the camera to stamp the recording date only, or date and time in the lower right corner of each snapshot. • Once date and time information is stamped into a snapshot, it cannot be edited or deleted. Example: December 19, 2009, 1:25 p.m. Date 2009/12/19 Date&Time 2009/12/19 1:25pm Off No stamping of date and/or time • Even if you do not stamp the date and/or time with Timestamp, you can do so later using the DPOF function or some printing application (page 76). • Digital zoom is disabled while date stamping is turned on. Other Settings (Set Up) 99 Setting the Camera’s Clock (Adjust) Setting the Camera’s Clock (Adjust) Procedure [MENU] * Set Up Tab * Adjust [8] [2] Change the setting at the cursor location ...