Assessments - 2, GPA: 4.5
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Sleep (page 126) is disabled while Auto Shutter being used. • To cancel Auto Shutter recording while movement, panning, or smile detection is being performed (indicated by “0 Auto” flashing on the monitor screen), press [SET]. • The “O Tracking” setting for the Auto Focus area cannot be used while Detect Blur or Detect Panning is selected for the Auto Shutter setting (page 63). • Always make sure you had “U Spot” selected for the Auto Focus area whenever you are using the Detect Smile Auto Shutter setting (page 63). • Auto Shutter cannot be used in combination with any of the following features. – Some BEST SHOT sample scenes (ID Photo, White board, etc., Prerecord (Movie), For YouTube, Voice Recording) • The following functions are disabled when shooting with Auto Shutter. – Triple Self-timer – Tracking AF Snapshot Tutorial B 31 Using Face Recognition (Face Recognition)Using Face Recognition (Face Recognition) The face recognition feature adjusts focus and brightness to the faces in the image. Face recognition has two modes, described below. Normal G Detects human faces in the image. Family First H Gives priority to specific faces that have been pre-recorded as family members. To perform a face recognition recording operation (Normal) 1. In the REC mode, press [SET]. 2. Use [8] and [2] to select the fifth Control Panel option from the top (Face Recognition). 3. Use [4] and [6] to select “G Face Detection: Normal” and then press [SET]. 4.Point the camera at the subject(s). The camera will detect human faces and display a frame around each one. 5.Half-press the shutter button. The camera will focus and the frames around the faces it focuses on will turn green. 6. Press the shutter button the rest of the way down. • Half pressing the shutter button to perform face recognition while “O Tracking” (page 63) is selected for the AF area, will cause the focus frame to follow the movement of the face. Snapshot Tutorial 32 Using the Family First Mode (Family First) . To pre-record the faces of family members, etc. 1. In the REC mode, press [SET]. 2. Use [8] and [2] to select the fifth Control Panel option from the top (Face Recognition). 3. Use [4] and [6] to select “K Record Family” and then press [SET]. 4. With the camera pointed straight at the face of the person you want to pre-record, align the frame on the monitor screen with the face and then press the shutter button. 5. When the message “Face recognition successful!” appears, use [8] and [2] to select “Save” and then press [SET]. NOTE • You can pre-record a total of 12 faces, for up to six different individuals. • Face data is stored in the camera’s built-in memory, in a folder named “FAMILY” (page 118). . To assign a priority level to pre-recorded face data You can use the procedure below to assign names and priority levels to pre-recorded faces. 1. In the REC mode, press [SET]. 2. Use [8] and [2] to select the fifth Control Panel option from the top (Face Recognition). 3. Use [4] and [6] to select “J Edit Family” Face data editing screen and then press [SET]. This will display the face data editing screen. 4. Use [8], [2], [4], and [6] to select the face data you want to edit, and then press [SET]. Snapshot Tutorial 33 5. Use [4] and [6] to select a name, and then press [2]. 6. Use [4] and [6] to select the priority level you want and then press [SET]. • You can set the priority to one of four levels: q (Disabled: no detection), and from . (Low) to v (High). 7. To complete the setting procedure, press [MENU] twice. NOTE • To delete pre-recorded face data, perform steps 1, 2, and 3 of the above procedure and then press [MENU]. You can use the menu to select one face data record or all face data records (page 20). • Formatting the camera’s built-in memory (page 129) deletes all the recorded face data. To add a face data shot to an existing pre-recorded family member Face recognition efficiency can be improved by recording three or four face data shots under various conditions for a single individual. 1. In the REC mode, press [SET]. 2. Use [8] and [2] to select the fifth Control Panel option from the top (Face Recognition). 3. Use [4] and [6] to select “J Edit Family” and then press [SET]. 4. Use [8], [2], [4], and [6] to select the thumbnail of face data to which you want to add another face data shot, and then press [MENU]. 5. Use [8] and [2] to select “Add”, and then press [SET]. 6. Perform steps 4 and 5 under “To pre-record the faces of family members, etc.” (page 33) to add the face data shot. NOTE • Camera memory can store face data for up to six individuals, and up to 12 face data items. Snapshot Tutorial 34 . To shoot a snapshot using pre-recorded face data 1. In the REC mode, press [SET]. 2. Use [8] and [2] to select the fifth Control Panel option from the top (Face Recognition). 3. Use [4] and [6] to select “H Face Recognition: Family First” and then press [SET]. 4. Point the camera at the subject(s). The camera will detect human faces and display a...