Assessments - 1, GPA: 4
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
2Under the lighting conditions you plan to use when shooting, point the camera at a blank white piece of paper so it fills the entire monitor screen and then press the shutter button. 3Press [SET]. The white balance setting is retained even if you turn off the camera. Blank white paper • When “Auto” is selected for the white balance setting, the camera automatically determines the white point of the subject. Certain subject colors and light source conditions can cause problems when the camera tries to determine the white point, which makes proper white balance adjustment impossible. If this happens, select the white balance setting that matches your shooting conditions (Daylight, Overcast, etc.). Advanced Settings 65 Specifying ISO Sensitivity (ISO) Procedure [r] (REC) * [MENU] * Quality Tab * ISO For details, see the Control Panel procedure on page 38. Specifying the Metering Mode (Metering) Procedure [r] (REC) * [MENU] * Quality Tab * Metering The metering mode determines what part of the subject is metered for exposure. MultiB Multi-pattern metering divides the image into sections and measures the light in each section for a balanced exposure reading. This type of metering provides error-free exposure settings for a wide range of shooting conditions. Center Weighted N Center weighted metering concentrates on the center of the focus area to measure light. This type of metering is best when you want some level of control over contrast. Spot. Spot metering takes readings at a very small area. Use this metering method when you want exposure to be set according to the brightness of a particular subject, without being affected by surrounding conditions. • The currently selected metering mode is indicated by an icon on the snapshot screen. No icon is displayed when “B Multi” is selected as the metering mode. Using Built-in Color Filters (Color Filter) Procedure [r] (REC) * [MENU] * Quality Tab * Color Filter Settings: Off, B/W, Sepia, Red, Green, Blue, Yellow, Pink, and Purple Advanced Settings 66 ProcedureControlling Image Sharpness (Sharpness) ProcedureControlling Image Sharpness (Sharpness) [r] (REC) * [MENU] * Quality Tab * Sharpness You can specify one of five sharpness settings from +2 (sharpest) to –2 (least sharp). ProcedureControlling Color Saturation (Saturation) [r] (REC) * [MENU] * Quality Tab * Saturation You can specify one of five saturation settings from +2 (most saturated) to –2 (least saturated). ProcedureAdjusting Image Contrast (Contrast) [r] (REC) * [MENU] * Quality Tab * Contrast You can specify one of five contrast settings from +2 (most contrast between light and dark) to –2 (least contrast between light and dark). ProcedureSpecifying Flash Intensity (Flash Intensity) [r] (REC) * [MENU] * Quality Tab * Flash Intensity You can specify one of five flash intensity settings from +2 (strongest) to –2 (weakest). • Flash intensity may not change when the subject is too far away or too close. Advanced Settings 67 Viewing Snapshots and Movies Viewing Snapshots See page 26 for the procedure for viewing snapshots. Viewing a Movie 1. Press [p] (PLAY) and then use [4] and [6] to display the movie you want to view. 2. Press [SET] to start playback. Movie icon: » Recording time Image quality Movie Playback Controls Fast forward/ fast reverse [4] [6] • Each press of either button increases the speed of the fast forward or fast reverse operation. • To return to normal playback speed, press [SET]. Play/pause [SET] 1 frame forward/ back [4] [6] • Holding down either button scrolls continuously. Volume adjustment Press [2] and then press [8] [2]. • Volume can be adjusted only while movie playback is in progress. Information display on/off [8] (DISP) Zoom Slide the zoom controller in the direction of z ([). • You can use [8], [2], [4], and [6] to scroll the zoomed image on the monitor screen. You can zoom a movie image up to 4.5 times normal size. Stop playback [MENU] • Playback may not be possible for movies not recorded with this camera. Viewing Snapshots and Movies 68 Zooming an On-screen Image Zooming an On-screen Image 1. In the PLAY mode, use [4] and [6] to scroll through the images until the one you want is displayed. 2. Slide the zoom controller towards z ([) to zoom. You can use [8], [2], [4], and [6] to scroll the zoomed image on the monitor screen. Slide the zoom controller towards w to unzoom the image. – If display indicators are turned on, an indicator in the lower right corner of the monitor screen shows what part of the zoomed image is currently displayed. – To exit the zoom screen, press [MENU] or [BS]. – Though the maximum image zoom factor is 8X, certain image sizes may not allow zooming up to the full 8X. Zoom factor Image area Current display area Displaying the Image Menu 1. In the PLAY mode, slide the zoom controller Boundary towards w (]). Use [8], [2], [4] and [6] to move the selection boundary around the image menu. To view a particular image, use [8], [2], [4], or [6] to move the s...