Assessments - 4, GPA: 4
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
This records the snapshot. Snap (Image is recorded.) Recording a Movie [0] (Movie) Press [0] (Movie) to start movie recording. Press [0] (Movie) again to stop movie recording. See the following pages for details. Standard movie (STD movie): page 55 High-definition movie (FHD movie): page 58 High speed movie (HS movie): page 58 Recording Beautiful Portraits (Make-up Function) The Premium Auto Make-up Function smoothes the skin texture of the subject and softens facial shadows caused by harsh sunlight for better looking portraits. There are three different Make-up Level settings: Off, Standard, and High. 1. Enter the Premium Auto mode (page 28). 2. Press [SET]. 3. Use [8] and [2] to select the third control panel option from the bottom (Make-up Level). 4. Use [4] and [6] to select the Make-up Level setting you want, and then press [SET]. • There are three available settings: “Off”, “Standard”, and “High”. 5. Shoot the image. Quick Start Basics 30 . If the image does not focus... If the focus frame stays red and the back lamp is flashing green, it means that the image is not in focus (because the subject is too close, etc.). Re-point the camera at the subject and try to focus again. . Shooting with Auto If the subject is not in the center of the frame... “Focus lock” (page 89) is the name of a technique you can use when you want to shoot an image in which the subject to be focused on is not within the focus frame in the center of the screen. To track the movement of a moving subject Half-press the shutter button to follow and focus automatically on a moving subject. See “E Tracking” (page 92) for more information. . Shooting with Premium Auto • In addition to shutter speed, aperture, and ISO sensitivity, the camera automatically executes the following operation as required when shooting with Premium Auto. – Auto Focus is normally performed until you half-press the shutter button. – Intelligent AF (page 92) – Face Detection (page 93) • Shooting with Premium Auto can cause vibration and noise to occur due to lens operation. This does not indicate malfunction. • In some cases, Premium Auto may not be able to interpret the shooting environment correctly. If this happens, shoot with standard Auto. Quick Start Basics 31 Viewing Snapshots Viewing Snapshots Use the following procedure to view snapshots on the camera’s monitor screen. • For information about how to play back movies, see page 101. • For information about images recorded using continuous shutter (CS), see page 103. 1. Press [p] (PLAY) to enter the PLAY mode. • This will display one of the snapshots currently stored in memory. • Information about the displayed snapshot also is included (page 11). • You also can clear the information to [p] (PLAY) view only the snapshot (page 12). • You can zoom in on the image by sliding the zoom controller towards z (page 108). If you are recording a snapshot that is very important to you, it is recommended that you zoom the image and check its details after recording it. 2. Use [4] and [6] to scroll between images. • Holding down either button scrolls at high speed. [6] [6] [4] [4] NOTE • Half-pressing the shutter button while in the PLAY mode or while a menu screen is displayed will switch directly to the REC mode. Quick Start Basics 32 Deleting Snapshots and Movies Deleting Snapshots and Movies If memory becomes full, you can delete snapshots and movies you no longer need in order to free up storage and record more images. IMPORTANT! • Remember that a file (image) delete operation cannot be undone. • For information about images recorded using continuous shutter (CS), see page 104. 1.Press [p] (PLAY) to enter the PLAY mode and then press [2] ( ). To delete a single file 2. Use [4] and [6] to scroll through the files until the one you want to delete is displayed. 3. Use [8] and [2] to select “Delete” and then press [SET]. • To delete other files, repeat steps 2 and 3. • To exit the delete operation, press [MENU]. • If a CS group (page 103) is displayed when you perform the above procedure, all of the images in the currently displayed CS group will be deleted. Quick Start Basics 33 To delete specific files 1. Press [p] (PLAY) to enter the PLAY mode and then press [2] ( ). 2. Use [8] and [2] to select “Delete Files” and then press [SET]. • This displays a file selection screen. 3. Use [8], [2], [4], and [6] to move the selection boundary to the file you want to delete, and then press [SET]. • This will select the check box of the currently selected file. • You can enlarge the selected image before deleting it by sliding the zoom controller towards z ([). 4. Repeat step 3 to select other files, if you want. After you are finished selecting files, press [MENU]. 5. Use [8] and [2] to select “Yes” and then press [SET]. • This deletes the files you selected. • To cancel the delete operation, select “No” in step 5 and then press [SET]. To delete all files 1. Press [p] (PLAY) to enter the PLAY mode and then press [2] ( ). 2. Us...