Log:
Assessments - 2, GPA: 3 ( )

Instruções de Operação Casio, Modelo QV-R200

Fabricante : Casio
Arquivo Tamanho: 1.06 mb
Arquivo Nome :
Língua de Ensino: en
Fotos e especificações  Casio  QV-R200
Ir para baixar



por este dispositivo também tem outras instruções :
Câmaras - QV-R200 (1.08 mb)es
Câmaras - QV-R200 (1.08 mb)de
Câmaras - QV-R200 (1.31 mb)ru

Facilidade de uso


Contact your nearest CASIO authorized service center. Battery Precautions . Precautions during Use • Operation provided by a battery under cold conditions is always less than operation under normal temperatures. This is due to the characteristics of the battery, not the camera. • Charge the battery in an area where the temperature is within the range of 10°C to 35°C (50°F to 95°F). Outside this temperature range charging can take longer than normal or even fail. • Do not tear or remove the battery outer label. • If a battery provides only very limited operation following a full charge, it probably means the battery has reached the end of its service life. Replace the battery with a new one. . Storage Precautions • Storing the battery for a long time while it is charged can cause deterioration of battery characteristics. If you do not plan to use a battery for some time, fully use up its charge before storing it. • Always remove the battery from the camera when you are not using it. A battery left in the camera can discharge and go dead, which will require some time to charge when you need to use the camera. • Store batteries in a cool, dry place (20°C (68°F) or lower). • To prevent over discharging of an unused battery, fully charge it, and then load it in the camera and fully use up the charge about once every six months. Appendix 77 Using the Camera in another Country Using the Camera in another Country . Precautions during Use • The bundled USB-AC adaptor is designed for operation with any power supply in the range of 100V to 240V AC, 50/60Hz. Note, however, that the shape of the power cord plug depends on each country or geographic area. Before taking the camera and USB-AC adaptor along on a trip, check with travel agent about the power supply requirements in your destination(s). • Do not connect the USB-AC adaptor to a power supply through a voltage converter or similar device. Doing so can lead to malfunction. . Extra Batteries • Taking along extra fully charged batteries (NP-80) is recommended while on a trip in order to avoid not being able to shoot images due to the battery going dead. Memory Card Precautions . Using a Memory Card • SD memory cards, SDHC memory cards, and SDXC memory cards have a write protect switch. Use the switch when you need to guard against accidentally deleting data. Note, however, if you write protect an SD memory card you must then turn write protection off whenever you want to record to it, format it, or delete any of its images. • If a memory card starts to behave abnormally during image playback, you can restore normal operation by reformatting it (page 64). However, it is recommended that you always take along multiple memory cards whenever using the camera far away from the home or office. • As you record data to and delete data from a memory card a number of times, it loses its ability to retain data. Because of this, periodic re-formatting of a memory card is recommended. • Electrostatic charge, electrical noise, and other phenomena can cause data to become corrupted or even lost. Make sure that you always back up important data on other media (CD-R, CD-RW, hard disk, etc.). Write enabled Write disabled Appendix 78 . Discarding or Transferring Ownership of a Memory Card or the Camera The format and delete functions of the camera do not actually delete files from the memory card. The original data remains on the card. Note that responsibility for the data on a memory card lies with you. The following procedures are recommended whenever you discard a memory card or the camera, or if you transfer ownership to another party. • When discarding a memory card, either physically destroy the memory card or use commercially available data delete software to completely delete the data on the memory card. • When transferring ownership of a memory card to another party, use commercially available data deletion software to completely delete the data on it. • Use the format function (page 65) to completely delete the data in built-in memory before discarding or transferring ownership of the camera. About Folder and File Names Your camera automatically creates specific directory of folders in the internal memory (or memory card) to organize captured images and videos. File Naming File names begin with “CIMG” and followed by a 4-digit number that increases in sequence. File numbering starts from 0001 when a new folder is created. If the highest folder number is 999 and the highest file number exceeds 9999, the camera will display the warning message “Folder cannot be created”. When this happens, try one of the following ways: • Reset the file number. See “Setting File Numbering” on page 64. . About DCF The following operations are supported for DCF-compliant images. Note, however, that CASIO makes no performance guarantees concerning these operations. • Transferring this camera’s DCF-compliant images to another manufacturer’s camera and view them. • Printing this camera’s DCF-compli...

Este manual também é adequado para os modelos :
Câmaras - QV-R70 (1.06 mb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias